H.Koenig HEPA Filter Instruction Manual

Продукт бүттүview

This document provides instructions for the H.Koenig HEPA filter, designed for use with H.Koenig cyclonic vacuum cleaner models TC10, TC12, TC14, and TC16.

1-сүрөт: H.Koenig HEPA Filter. This image displays the cylindrical HEPA filter with pleated white filter material, enclosed by black plastic rings at the top and bottom, and a central black cylindrical protrusion at the top for attachment.

The HEPA filter is a crucial component for maintaining the air quality and performance of your vacuum cleaner by trapping fine dust particles and allergens.

Шайкештик

This HEPA filter is compatible with the following H.Koenig vacuum cleaner models:

• H.Koenig TC10
• H.Koenig TC12
• H.Koenig TC14
• H.Koenig TC16

Ensure your vacuum cleaner model matches one of the listed models for proper fit and function.

Орнотуу (Орнотуу)

Follow these steps to install or replace the HEPA filter in your H.Koenig vacuum cleaner:

1. Өчүрүү: Before beginning, ensure the vacuum cleaner is unplugged from the power outlet to prevent accidental operation.
2. Кирүү чыпка бөлүмү: Locate the filter compartment on your vacuum cleaner. Refer to your vacuum cleaner's specific instruction manual for the exact location and method to open it. This typically involves opening the dustbin or a dedicated filter cover.
3. Эски чыпканы алып салуу: Carefully remove the old HEPA filter. It may be dusty, so handle it over a waste bin.
4. Жаңы чыпка киргизүү: Place the new H.Koenig HEPA filter into the compartment. Ensure it is seated correctly and securely. The filter is designed to fit in only one orientation.
5. Жабуу бөлүм: Close the filter compartment or reattach the dustbin, ensuring all latches are secured.
6. Сыноо: Plug in the vacuum cleaner and perform a brief test to ensure it operates normally.

Иштөө нускамалары

The HEPA filter operates passively as part of your vacuum cleaner's filtration system. No specific user action is required for its operation once installed. Ensure the filter is clean and properly installed for optimal vacuum performance.

Техникалык тейлөө

Regular maintenance of your HEPA filter is essential for maintaining vacuum cleaner performance and air quality.

• Кир жуугуч чыпка: This HEPA filter is washable. To clean, gently tap off loose dirt over a waste bin. Then, rinse the filter under cool running water until the water runs clear. Do not use detergents or hot water.
• Кургатуу: Allow the filter to air dry completely for at least 24 hours before reinserting it into the vacuum cleaner. Ensure it is completely dry to prevent mold growth and damage to the vacuum. Do not use heat to dry the filter.
• Алмаштыруу графиги: It is recommended to change the HEPA filter every six months, or sooner if you notice a significant loss of suction power from your vacuum cleaner. A clogged filter can reduce efficiency and strain the vacuum motor.

Проблемаларды чечүү

If you experience issues related to the HEPA filter, consider the following:

• Кыскартылган соргуч кубаттуулугу:
  • Себеби: The filter may be clogged with dust and debris.
  • Чечим: Clean the filter as described in the Maintenance section. If cleaning does not restore suction, replace the filter.
• Өзгөчө жыттар:
  • Себеби: А дamp filter or accumulated organic matter in the filter.
  • Чечим: Ensure the filter is completely dry after washing. If odors persist, replace the filter.
• Фильтр туура келбейт:
  • Себеби: Туура эмес чыпка модели же туура эмес орнотуу.
  • Чечим: Verify that the filter is the correct model for your H.Koenig vacuum cleaner (TC10, TC12, TC14, TC16). Re-attempt installation, ensuring correct orientation.

Техникалык шарттар