Rev-A-Shelf 14-Inch Tip-Out Plastic Sink Trays Instruction Manual

1. Продукт бүтүп калдыview

The Rev-A-Shelf 14-inch Tip-Out Plastic Sink Trays are designed to maximize storage efficiency in kitchen, laundry room, or vanity base cabinets. These trays utilize the often-unused space behind false drawer fronts, providing convenient access to small items.

The set includes two durable injection-molded polymer trays: one conventional open tray and one accessory tray featuring a ring holder and soap dish. Self-holding hinges and mounting hardware are provided for installation.

2. Компоненттер камтылган

• 1 x White Open Tray (14"W x 2.13"D x 3.81"H)
• 1 x White Accessory Tray with Ring Holder and Soap Dish (14"W x 2.13"D x 3.81"H)
• 2 x Pairs of Self-Holding Hinges
• Монтаждоочу жабдык

Image 2.1: Contents of the Rev-A-Shelf 14-inch Tip-Out Sink Tray package, showing both trays and hinges.

3. Техникалык шарттар

Image 3.1: Detailed dimensions of the tip-out tray and its corresponding hinge mechanism.

4. Орнотуу боюнча нускамалар

Installation of the Rev-A-Shelf Tip-Out Trays requires basic tools and can typically be completed within 30 minutes. It is recommended to install these trays before a sink is set, if possible, for easier access.

4.1 Керектүү куралдар

• Power Drill
• Карандаш
• Screwdriver
• Тасма өлчөгүч

4.2 Орнотууга чейинки кароолор

• Ensure a minimum of 2-1/4 inches of clearance between the backside of the cabinet door and the front of the sink basin.
• The cabinet opening width should be 16-1/4 inches or larger for the 14-inch trays.
• Measure your cabinet space carefully, checking for any obstructions like plumbing or existing door hinges.

Image 4.1: Guide for measuring cabinet openings, showing considerations for both framed and frameless cabinet styles.

4.3 Этап-этабы менен орнотуу

1. Prepare Hinges: Use the provided template or measure to position the hinges correctly. Pre-drill all screw holes for the hinges on the cabinet frame. Insert and remove screws once to ensure smooth installation later. Ensure hinges are not flush with the drawer opening to avoid a gap at the top.
2. Mark Cabinet Door: Hold the cabinet door in place and mark the hinge attachment points from inside the cabinet using a pencil. Alternatively, measure precisely.
3. Pre-drill Door Holes: Pre-drill holes on the cabinet door at the marked locations. Be careful not to drill through the door.
4. Илмектерди эшикке бекитүү: Screw the hinges onto the cabinet door.
5. Position Trays: Determine the optimal position for the trays inside the cabinet. A common recommendation is to position the top of the tray approximately 1/8 inch below the top edge of the cabinet opening to prevent interference. Mark the screw locations for the trays.
6. Mount Trays: Pre-drill holes for the trays and secure them with screws. Do not overtighten, allowing for slight movement for cleaning.
7. Жыйынтыктоочу жыйын: With the hinges extended (in the open position), attach the cabinet door with the trays to the cabinet frame using the pre-drilled hinge holes. Tighten all screws securely.

Сүрөт 4.2: Мисample of installed tip-out trays in a kitchen cabinet, showing one tray holding a cleaning brush.

Сүрөт 4.3: Башка view of installed tip-out trays, with the accessory tray holding a sponge and a small soap dish.

Image 4.4: Overhead perspective of the tip-out trays in use, demonstrating their capacity for sink-side accessories.

Image 4.5: Tip-out trays installed in dark-colored kitchen cabinets, showcasing their versatility with different cabinet finishes.

5. Иштөө нускамалары

To operate the tip-out trays, gently pull the top edge of the false cabinet front forward. The self-holding hinges will allow the tray to pivot outwards and downwards, providing access to the contents. To close, push the false cabinet front back into its original position until it is flush with the cabinet frame.

Сүрөт 5.1: Алдыңкы view of the tip-out trays in an open position, revealing stored items.

6. Техникалык тейлөө

The polymer trays are designed for easy cleaning. They are dishwasher safe. For general cleaning, wipe with a damp cloth and mild detergent. Avoid abrasive cleaners that may damage the polymer surface.

7. Кыйынчылыктарды

7.1 Hinge Rubbing or Sticking

If a hinge rubs or sticks when opening or closing, check the alignment of the hinge and the cabinet door. Ensure all screws are tightened appropriately, but not overtightened, which could cause misalignment. Minor adjustments to screw tightness or hinge position may resolve the issue.

7.2 Tray Not Closing Flush

If the tray does not close flush with the cabinet, verify that no items within the tray are obstructing its movement. Recheck hinge alignment and ensure the cabinet door itself is properly aligned with the cabinet frame.

8. Кепилдик маалыматы

The Rev-A-Shelf 14-inch Tip-Out Plastic Sink Trays come with a limited lifetime warranty. For specific details regarding warranty coverage and claims, please refer to the official Rev-A-Shelf webсайтка же кардарларды колдоо менен байланышыңыз.

9. Колдоо

Кошумча жардам, техникалык колдоо же алмаштыруу бөлүктөрү тууралуу суроо үчүн расмий өкүлгө кайрылыңыз Rev-A-Shelf Store же алардын кардарларды тейлөө бөлүмүнө түздөн-түз кайрылыңыз.