Introduction
This manual provides detailed instructions for the safe and efficient operation, setup, and maintenance of your ADJ Fog Fury 3000 Professional Fog Machine. Please read this manual thoroughly before operating the device to ensure proper usage and to prevent damage or injury.
The ADJ Fog Fury 3000 is a high-output fogger designed for professional applications, featuring DMX control capabilities and robust construction. It is engineered to produce dense, consistent fog for various entertainment and event settings.
Коопсуздук маалыматы
Always observe the following safety precautions to reduce the risk of electric shock, fire, or personal injury:
- Ensure the unit is connected to a grounded power supply.
- Электр шнуру бузулган болсо, аппаратты иштетпеңиз.
- Use only ADJ Water-Based Fog Fluids. Other fluids may cause damage or create a health hazard.
- Аспапты сууга же башка суюктуктарга батырбаңыз.
- Аппаратты күйүүчү материалдардан алыс кармаңыз.
- Иштеп жатканда түзмөктүн айланасында жетиштүү желдетүүнү камсыз кылыңыз.
- Do not block the fog output nozzle.
- Allow the unit to cool down completely before handling or storing.
- Балдар жетпеген жерде сактаңыз.
- Refer to the Proposition 65 warning for California residents regarding potential chemical exposure.
Пакеттен чыгаруу жана баштапкы орнотуу
Carefully unpack the ADJ Fog Fury 3000 and inspect it for any signs of damage during transit. If any damage is observed, contact your dealer immediately.
Пакеттин мазмуну:
- ADJ Fog Fury 3000 Fog Machine
- Зымдуу алыстан башкаруу
- Электр кабели
- Колдонуучунун Колдонмосу (бул документ)
Жайгашкан жери:
Place the fog machine on a flat, stable surface. Ensure there is sufficient space around the unit for proper ventilation. Do not place the unit directly on carpet or other soft surfaces that may block ventilation openings.
Сүрөт: алдыңкы жагы view of the ADJ Fog Fury 3000 Fog Machine, showing the fog output nozzle and fluid tank.
Fluid Tank Installation:
- Unscrew the cap of the fluid tank located on the top of the unit.
- Carefully pour ADJ Water-Based Fog Fluid into the tank. Do not overfill. The tank has an LED light for easy visibility in dark environments.
- Securely screw the cap back onto the fluid tank.
- Ensure the fluid hose inside the tank is fully submerged in the fog fluid.
Сүрөт: Арткы view of the ADJ Fog Fury 3000, displaying the DMX LCD display, power switch, and various input/output ports.
Иштөө нускамалары
Күйгүзүү:
- Connect the power cable to the unit and then to a suitable grounded power outlet.
- Flip the main power switch located on the rear panel to the "ON" position.
- The unit will begin its warm-up cycle, which takes approximately 8 minutes. The status indicator on the unit or remote will change when ready.
Башкаруу режимдери:
The Fog Fury 3000 offers multiple control options:
1. Кол режими:
- Connect the wired remote control to the designated port on the rear of the unit.
- Press and hold the button on the remote to manually activate fog output. Release the button to stop.
Image: The ADJ FF23WR Wireless Remote, which is sold separately, shown with its receiver and connection cable. This remote allows for wireless operation of the fog machine.
2. Таймер режими:
- The wired remote typically includes timer functions. Refer to the remote's specific instructions for setting interval, duration, and volume.
3. DMX башкаруу:
The Fog Fury 3000 is DMX operational via 3-pin DMX connections. It utilizes 3 DMX channels.
- Connect a DMX controller to the DMX IN port on the rear of the unit.
- Set the DMX address using the LCD display and buttons on the rear panel. Refer to the DMX channel chart below for specific functions.
DMX канал диаграммасы:
| Канал | Функция | Нарк диапазону | Description |
|---|---|---|---|
| 1 | Туман чыгышы | 0-255 | 0 = Off, 1-255 = Fog Output (increasing intensity) |
| 2 | Атайын функциялар | 0-255 | Reserved for future functions or specific modes (refer to advanced DMX manual if available) |
| 3 | Strobe/Pulse | 0-255 | 0 = Off, 1-255 = Strobe/Pulse effect (increasing ылдамдык) |
For detailed DMX programming, consult your DMX controller's manual.
Техникалык тейлөө
Regular maintenance ensures the longevity and optimal performance of your Fog Fury 3000.
Тазалоо:
- Сырткы: Сыртын жумшак, кургак чүпүрөк менен тазалаңыз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
- Суюктук танкы: Periodically empty and rinse the fluid tank with distilled water to prevent residue buildup.
- Сопло: If the fog output appears weak or inconsistent, the nozzle may be partially clogged. Use a small brush or compressed air to gently clear any obstructions.
Суюктукту башкаруу:
- Always use high-quality, water-based fog fluid recommended by ADJ.
- Do not mix different types of fog fluid.
- Store fog fluid in a cool, dark place, away from direct sunlight.
- The unit features an automatic circuit cut-off to protect the pump if the fog fluid tank runs dry. However, it is best practice to ensure sufficient fluid before operation.
Сактагыч:
Before storing the unit for extended periods, run a small amount of distilled water through the system to clean the pump and heater coil. This helps prevent mineral buildup. Store the unit in a cool, dry place.
Проблемаларды чечүү
If you encounter issues with your Fog Fury 3000, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Туман чыкпайт | No power; Unit not warmed up; No fog fluid; Clogged nozzle/pump; Remote not connected. | Check power connection; Wait for warm-up (approx. 8 min); Refill fluid tank; Clean nozzle/pump; Ensure remote is securely connected. |
| Weak or inconsistent fog | Low fluid level; Incorrect fluid type; Partially clogged nozzle/pump; Unit not fully heated. | Refill fluid; Use ADJ water-based fluid; Clean nozzle/pump; Allow unit to fully heat. |
| Бирдик DMX жооп бербей жатат | Incorrect DMX address; Faulty DMX cable; DMX controller issue; DMX termination. | Verify DMX address setting; Test with a different DMX cable; Check DMX controller; Ensure proper DMX termination if using multiple units. |
| Unit overheats or shuts off | Insufficient ventilation; Fluid tank empty (safety cut-off). | Ensure adequate airflow around the unit; Refill fluid tank. |
If the problem persists after attempting these solutions, contact ADJ customer support.
Техникалык шарттар
Detailed technical specifications for the ADJ Fog Fury 3000:
- Модел: FOG FURY 3000
- Энергияны керектөө: 1500 Вт (макс. 1600 Вт)
- Жылытуу убактысы: Болжол менен 8 мүнөт
- Туман чыгаруу: Мүнөтүнө 21,000 куб фут (CFM)
- Суюктуктун сыйымдуулугу: 5 литр
- Контролдоо: Manual, Timer (via wired remote), 3-pin DMX (3 channels)
- Өлчөмдөрү: 18.75" x 13.75" x 12.75"
- Салмагы: 25 фунт.
- Коопсуздук өзгөчөлүктөрү: Electronic Thermal Sensing Technology, Automatic Circuit Cut-off (dry tank protection)
- Уруксат берүүлөр: ETL бекитилген
Кепилдик жана колдоо
Кепилдик маалыматы:
ADJ Products provides a limited warranty for its products. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ADJ Products webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.
Кардарларды колдоо:
For technical assistance, service, or parts inquiries, please contact ADJ Products customer support. You can find contact information on the official ADJ webсайты же ыйгарым укуктуу дилериңиз аркылуу.
ADJ Products Official Webсайт: www.adj.com
