Jones Stephens Corp Service Sink Hose with Stainless Bracket User Manual

Introduction

This manual provides instructions for the proper installation, operation, and maintenance of the Jones Stephens Corp Service Sink Hose with Stainless Bracket, Model M05001. Please read these instructions carefully before use to ensure safe and efficient operation.

Figure 1: Jones Stephens Service Sink Hose with Stainless Bracket. An image showing the black service sink hose coiled, with a brass-colored connector on one end, and a rectangular stainless steel wall bracket with a hose retention mechanism in the center.

Жайгашуу

1. Компоненттерди текшерүү: Verify that all components are present and undamaged. The package should include the service sink hose and the stainless steel wall bracket.
2. Монтаждоо ордун тандоо: Choose a suitable location near your service sink for the stainless steel bracket. Ensure the surface is sturdy and can support the bracket and hose.
3. Кронштейнди орнотуу: Using appropriate fasteners (not included), securely attach the stainless steel bracket to the wall. Ensure it is level and firmly fixed.
4. Шлангды туташтыруу: Attach the threaded end of the service sink hose to a compatible water supply faucet or fixture. Hand-tighten first, then use a wrench for a snug fit, being careful not to overtighten.
5. Шлангды бекитиңиз: Place the hose into the bracket's retention mechanism to keep it organized and prevent it from falling.

Иштөө нускамалары

• Суу менен камсыздоо: Ensure the water supply to the faucet or fixture is turned on.
• Using the Hose: Remove the hose from the bracket. Direct the nozzle towards the area requiring water.
• Агымды башкаруу: Adjust the water flow using the faucet or fixture controls.
• Колдонгондон кийин: Turn off the water supply at the faucet. Drain any remaining water from the hose. Return the hose to the stainless steel bracket for storage.

Техникалык тейлөө

• үзгүлтүксүз тазалоо: Clean the exterior of the hose and the stainless steel bracket periodically with mild soap and water. Rinse thoroughly and dry.
• Агышууларды текшерүү: Regularly check the hose and connections for any signs of leaks, cracks, or wear. Replace the hose if damage is observed.
• Кронштейн текшерүү: Ensure the mounting screws for the bracket remain tight. Tighten if necessary.
• Сактагыч: When not in use, store the hose securely in its bracket to prevent kinking or damage.

Проблемаларды чечүү

• Төмөн суунун басымы:

  Мүмкүн болгон себеп: Partially closed water supply valve or kinked hose.

  Чечим: Ensure the water supply valve is fully open. Check the hose for any kinks and straighten them.
• Туташуулардагы агып кетүүлөр:

  Мүмкүн болгон себеп: Loose connection or damaged washer.

  Чечим: Tighten the hose connections. If leaks persist, inspect and replace the rubber washer inside the hose connector if it is worn or damaged.

• Hose Not Staying in Bracket:

  Мүмкүн болгон себеп: Bracket mechanism is loose or hose is improperly placed.

  Чечим: Ensure the hose is correctly seated in the bracket's retention mechanism. Check if the bracket itself is securely mounted to the wall.

Техникалык шарттар

Кепилдик маалымат

Specific warranty details for the Jones Stephens Corp Service Sink Hose with Stainless Bracket (Model M05001) are not provided in this manual. For comprehensive warranty information, please refer to the documentation included with your purchase or contact Jones Stephens directly through their official webсайт же кардарларды тейлөө каналдары.

Колдоо

For further assistance, technical support, or inquiries regarding the Jones Stephens Corp Service Sink Hose with Stainless Bracket, please contact Jones Stephens customer service. Visit the official Jones Stephens webбайланыш маалыматы жана кошумча ресурстар үчүн сайт.

Note: Always ensure to use genuine replacement parts if any components require replacement.