BFT Icaro тез коммерциялык кызматтык жылдырма дарбазасынын операторунун колдонмосу

1. Киришүү

This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of the BFT Icaro Fast Commercial Duty Slide Gate Operator. Please read this manual thoroughly before beginning any procedures to ensure proper functionality and safety.

The BFT Icaro Fast is designed for commercial slide gates, offering robust performance and reliability. It is equipped with advanced features for secure and convenient gate automation.

2. Коопсуздук маалыматы

WARNING: Failure to follow these safety instructions could result in serious injury or death, and damage to property.

• Орнотуу жана тейлөө квалификациялуу кызматкерлер тарабынан гана аткарылышы керек.
• Ensure all power is disconnected before performing any service or maintenance.
• Keep hands, feet, and clothing clear of the gate and operator during operation.
• Do not allow children to play near the gate or operate the controls.
• Install safety devices such as photocells and safety edges as required by local regulations.
• The gate must be properly balanced and in good working condition before operator installation.

3. Орнотуу жана орнотуу

This section outlines the steps for installing the BFT Icaro Fast slide gate operator. Refer to the detailed wiring diagrams provided in the separate installation guide for electrical connections.

3.1 Таңгактан чыгаруу жана текшерүү

Carefully unpack all components and inspect for any shipping damage. Report any damage to your supplier immediately.

3.2 Mounting the Operator

1. Choose a stable, level mounting surface adjacent to the gate.
2. Securely fasten the operator base to the concrete pad or mounting plate using appropriate hardware.
3. Ensure the operator is correctly aligned with the gate's movement path.

3.3 Installing the Rack

The gate rack is essential for the operator's movement. Rack is available in nylon or metal material. Each piece of rack is typically 3.3 ft. long. To determine the required number of rack pieces, divide your total gate length by 3.3.

1. Attach the rack securely to the gate, ensuring it is level and parallel to the operator's pinion gear.
2. Maintain a small clearance (approximately 1-2mm) between the rack and the pinion to allow for smooth operation and thermal expansion.

3.4 Электр байланыштары

All electrical connections must comply with local electrical codes and standards. The power supply is 120V +-10%, 60Hz single-phase. Connect the main power, safety devices (photocells, safety edges), and control accessories to the LEO D control panel (incorporated) as per the wiring diagram.

3.5 Чектөө которгучун жөндөө

The Icaro Fast uses electromechanical limit switches. Adjust these switches to define the gate's fully open and fully closed positions. Refer to the control panel manual for precise adjustment procedures.

Figure 1: BFT Icaro Fast Commercial Duty Slide Gate Operator. This image shows the main unit of the gate operator, a grey rectangular housing with a blue manual release knob on the lower front.

4. Иштөө нускамалары

4.1 Негизги операция

The gate can be operated using the provided BFT Mitto remotes or other compatible control devices. Pressing the designated button on the remote will initiate the gate's movement (open or close). A second press will typically stop the gate, and a third press will reverse its direction.

4.2 Алыстан башкарууну программалоо

Refer to the BFT Mitto remote control manual for detailed instructions on programming additional remotes or reprogramming existing ones. This process typically involves accessing the control panel's programming mode.

4.3 Кол менен чыгаруу

In case of power failure or malfunction, the gate can be operated manually. Locate the manual release mechanism (typically a key-operated lever or knob, as seen in Figure 1) on the operator. Insert the key and turn it to disengage the motor, allowing the gate to be moved by hand. Remember to re-engage the motor after manual operation.

5. Техникалык тейлөө

Regular maintenance ensures the longevity and reliable operation of your BFT Icaro Fast gate operator. Perform these checks periodically:

• Ай сайын: Inspect the gate for smooth movement, ensuring no obstructions or excessive friction. Check the rack for wear and proper engagement with the pinion.
• Чейрек сайын: Clean the operator housing and remove any debris. Check all electrical connections for tightness and signs of corrosion. Test all safety devices (photocells, safety edges) for proper function.
• Жыл сайын: Have a qualified technician inspect the motor, gearbox, and control panel. Lubricate moving parts as recommended by BFT (refer to the full technical manual for specific lubrication points and types).

CAUTION: Always disconnect power before performing any maintenance or cleaning.

6. Кыйынчылыктарды

This section provides solutions for common issues. For problems not listed here, contact technical support.

7. Техникалык шарттар

Technical specifications for the BFT Icaro Fast Commercial Duty Slide Gate Operator:

• Max Gate Weight: 2200 фунт
• Дарбазанын максималдуу узундугу: 65 фут
• Output Revolutions: мүнөтүнө 37
• Pinion Pitch: 4 мм (25 тиш)
• Электр камсыздоо: 120V +-10%, 60Hz single-phase
• Башкаруу панели: LEO D (incorporated)
• Type of Limit Switch: Электромеханикалык
• Экологиялык шарттар: 5°F – 140°F (-15°C – 60°C)
• Жылуулук коргоо: Интеграцияланган
• Leaf Speed: 12 м/мин
• Модель номери: BFT-ICARO-GATE-OPENER
• ASIN: B00ICUG50E

8. Кепилдик жана колдоо

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official BFT website for detailed warranty terms and conditions. For technical support, spare parts, or service inquiries, please contact your authorized BFT dealer or distributor.

For further assistance, please have your model number (ICARO) and ASIN (B00ICUG50E) ready when contacting support.