Brady 57974 Аммиак түтүк маркеринин колдонуучу колдонмосу

1. Продукт бүтүп калдыview

The Brady 57974 Ammonia Pipe Marker is designed for clear and effective labeling of ammonia piping systems. This product ensures compliance with safety standards by providing highly visible identification of pipe contents. Each pack contains 12 individual markers, suitable for industrial and commercial applications where precise pipe content identification is critical for safety and operational efficiency.

This pipe marker is specifically engineered to meet the IIAR (International Institute of Ammonia Refrigeration) Standard, ensuring its suitability for ammonia refrigeration systems and other ammonia-carrying pipelines. The design includes clear text and directional arrows to indicate flow, enhancing safety protocols and facilitating quick identification in emergency situations or during routine maintenance.

Figure 1: Brady 57974 Ammonia Pipe Marker. This image displays a rolled-up yellow pipe marker with black text "LTRL LIQ AMMONIA LOW" and a black arrow indicating flow direction. The marker features orange and green bands for additional identification.

2. Орнотуу жана орнотуу

Proper installation of the Brady 57974 pipe marker is crucial for its effectiveness and longevity. Follow these steps for optimal application:

1. Бетти даярдоо: Ensure the pipe surface where the marker will be applied is clean, dry, and free from grease, oil, dust, or any other contaminants. Use a suitable cleaning agent if necessary, and allow the surface to dry completely.
2. Жайгашкан жери: Position the pipe marker in a highly visible location on the pipe, ideally near valves, fittings, changes in direction, or at regular intervals along long pipe runs. Ensure the text and directional arrow are oriented correctly for easy reading.
3. Колдонмо: Peel off the backing from the adhesive side of the marker. Carefully wrap the marker around the pipe, ensuring it adheres smoothly without wrinkles or air bubbles. Press firmly along the entire length of the marker to ensure full contact with the pipe surface.
4. Directional Arrow: Confirm that the directional arrow on the marker accurately indicates the flow direction of the ammonia within the pipe.

For best results, apply the markers in an environment with moderate temperature and humidity. Avoid applying in extremely cold or hot conditions, as this may affect adhesive performance.

3. Operating Instructions (Purpose and Function)

The Brady 57974 Ammonia Pipe Marker serves as a critical visual communication tool. Its primary function is to clearly identify pipes carrying ammonia, enhancing safety and operational efficiency within industrial environments.

• Content Identification: The prominent "AMMONIA" text immediately informs personnel about the pipe's contents, preventing accidental exposure or mishandling.
• Агым багыты: The integrated directional arrow indicates the flow of the substance, which is vital for maintenance, troubleshooting, and emergency response.
• Стандарттык шайкештик: Designed to meet IIAR standards, these markers help facilities comply with industry regulations and best practices for ammonia refrigeration systems.
• Өркүндөтүлгөн коопсуздук: By providing clear and consistent labeling, the markers reduce the risk of errors during maintenance, repairs, or system modifications, contributing to a safer working environment.

No active "operation" is required for the marker itself; its function is passive, providing continuous visual information once installed.

4. Техникалык тейлөө

To ensure the continued effectiveness and readability of your Brady 57974 Ammonia Pipe Markers, periodic maintenance is recommended:

• Үзгүлтүксүз текшерүү: Periodically inspect all installed pipe markers for signs of wear, fading, peeling, or damage. The frequency of inspection should be determined by the environmental conditions and operational demands of your facility.
• Тазалоо: If markers become dirty, gently clean them with a mild soap solution and a soft cloth. Avoid abrasive cleaners or harsh chemicals that could damage the marker's surface or fade the print. Rinse with clean water and allow to air dry.
• Алмаштыруу: Replace any markers that are no longer clearly legible, have lost their adhesive properties, or are physically damaged. Maintaining clear and intact labeling is essential for safety compliance.
• Экологиялык эске алуулар: While designed for durability, extreme temperatures, prolonged exposure to direct sunlight, or harsh chemical environments may accelerate wear. Consider these factors during inspection and replacement planning.

5. Кыйынчылыктарды

While the Brady 57974 pipe markers are designed for reliability, certain issues may arise. Here are common concerns and their solutions:

6. Техникалык шарттар

• Модель номери: 57974
• Продукт түрү: Pipe Marker
• Substance Identified: Ammonia (IIAr)
• Саны: Пакет 12 шт
• Өндүрүүчү: Brady
• ASIN: B00ID7YL02
• Биринчи жеткиликтүү датасы: 11-февраль, 2014-жыл
• Шайкештик: Meets IIAR Standard

7. Кепилдик жана колдоо

For information regarding product warranty, returns, or technical support for the Brady 57974 Ammonia Pipe Marker, please refer to the official Brady website or contact Brady customer service directly. Specific warranty terms may vary based on region and purchase agreement.

You can visit the official Brady store for more information: Brady Official Store