Steinbach SPS 100-1T Self-Priming Filter Pump User Manual

1. Продукт бүтүп калдыview

The Steinbach SPS 100-1T self-priming filter pump is designed to be the central component of your pool's circulation system. This robust pump features a pre-filter and an integrated timer, making it suitable for pools up to approximately 40,000 liters (10,567 gallons) in volume. It operates on 230V/550W power and offers a pumping capacity of 9,480 liters per hour (158 l/min) with a maximum pump height of 10 meters.

The pump is designed for durability and efficiency, ensuring clean and clear pool water. It is compatible with hose connections of Ø 32/38 mm and can operate with water temperatures up to 35 °C.

Figure 1: ашыкview of the Steinbach SPS 100-1T Self-Priming Filter Pump. This image shows the complete pump unit, including the motor, pump housing, and pre-filter basket.

2. Коопсуздук нускамалары

• Техникалык тейлөө же тазалоо иштерин жүргүзүүдөн мурун, насосту ар дайым электр кубатынан ажыратыңыз.
• Ensure the pump is installed on a stable, level surface to prevent vibration and movement.
• Do not operate the pump dry. Ensure it is always filled with water before starting.
• Иштеп жатканда балдарды жана үй жаныбарларын насостон алыс кармаңыз.
• Only use the pump for its intended purpose (pool water filtration).
• Regularly inspect the power cable for damage. Do not use if damaged.
• Ensure all electrical connections are properly sealed and protected from water.

3. Орнотуу жана орнотуу

3.1 Пакеттен чыгаруу

Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз. Бардык тетиктердин бар экенин жана бузулбаганын текшериңиз. Толук инвентаризация үчүн таңгактоо тизмесин караңыз.

3.2 Орнотуу

Position the pump on a firm, level surface, preferably below the water level of the pool for optimal self-priming. Ensure adequate ventilation around the pump to prevent overheating. The pump should be placed in a location protected from direct sunlight and adverse weather conditions.

3.3 Шлангдарды туташтыруу

Connect the pool's suction line to the inlet of the pump (the side with the pre-filter) and the return line to the outlet. The pump is designed for Ø 32/38 mm hose connections. Secure all hose connections with appropriate clampагып кетпеши үчүн.

Сүрөт 2: Жакын пландан view of the pre-filter inlet with a hose connected. This shows the transparent pre-filter housing and the connection point for the pool's suction hose.

Сүрөт 3: Жакын пландан view of the pump outlet with a hose connected. This illustrates the connection point for the pool's return hose.

3.4 Насосту толтуруу

Before first use, or after the pump has been drained, it must be primed. Open the pre-filter lid and fill the pre-filter basket and pump housing completely with water. Replace the lid securely. This ensures the pump does not run dry, which can cause damage.

4-сүрөт: View of the pre-filter inlet without a hose attached. This shows the threaded connection for the pre-filter housing.

5-сүрөт: View of the pump outlet without a hose attached. This shows the threaded connection for the outlet hose.

3.5 Электрдик туташуу

Connect the pump to a grounded 230V power outlet. Ensure the electrical circuit is protected by a Residual Current Device (RCD) for safety. Do not use extension cords unless absolutely necessary, and ensure they are rated for outdoor use and the pump's power requirements.

4. Иштөө нускамалары

4.1 Starting and Stopping the Pump

Once the pump is primed and all connections are secure, press the КҮЙГҮЗҮҮ/ӨЧҮРҮҮ button on the control panel to start the pump. Press it again to stop the pump.

4.2 Using the Integrated Timer

The SPS 100-1T pump features an integrated timer for automated operation. Use the ТАЙМЕР button to set the desired operating duration. The control panel typically has indicators for various time settings (e.g., 2, 4, 6, 8, 10, 12, 14, 16, 24 hours). Select the appropriate duration based on your pool's size and usage to ensure adequate filtration.

Сүрөт 6: Жакын пландан view of the pump's control panel. This image highlights the ON/OFF and TIMER buttons, along with the indicators for setting the filtration duration.

4.3 Optimal Filtration Time

For optimal water quality, it is generally recommended to filter the entire volume of your pool water at least once per day. The required filtration time depends on the pump's flow rate and your pool's volume. For this pump with a flow rate of 9,480 l/h, a 40,000-liter pool would require approximately 4.2 hours of filtration per day (40,000 L / 9,480 L/h ≈ 4.2 h).

5. Техникалык тейлөө

5.1 Cleaning the Pre-Filter Basket

The pre-filter basket collects larger debris and should be cleaned regularly to maintain pump efficiency.

1. Turn off the pump and disconnect it from the power supply.
2. Unscrew the transparent lid of the pre-filter.
3. Remove the pre-filter basket and empty any collected debris.
4. Rinse the basket thoroughly with clean water.
5. Inspect the O-ring seal on the lid for damage and ensure it is clean.
6. Place the clean basket back into the housing and securely screw on the lid.
7. Re-prime the pump if necessary before restarting.

5.2 Кышка даярдык

Before the first frost, the pump must be drained and stored in a frost-free environment.

• Насосту электр кубатынан ажыратыңыз.
• Бардык шлангдарды ажыратыңыз.
• Remove the drain plug (if present) or tilt the pump to ensure all water drains out.
• Clean the exterior of the pump.
• Насосту кургак, үшүк тийбеген жерде сактаңыз.

6. Кыйынчылыктарды

7. Техникалык шарттар

8. Кепилдик жана колдоо

This product comes with a standard manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support, spare parts, or warranty claims, please contact Steinbach customer service or your authorized dealer.

Steinbach Contact Information:

• Webсайт: www.steinbach.at
• Үлгү шилтемеси: 9008748409179

Колдоо кызматына кайрылууда моделиңиздин номерин (040917) жана сатып алуу күнүн даярдап алыңыз.