PROFLO PFA600 эки бөлүктүү ABS душ дренажы үчүн колдонмо

Introduction

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the PROFLO PFA600 Two-Piece ABS Shower Drain. Please read this manual thoroughly before beginning installation to ensure proper function and longevity of your product.

The PROFLO PFA600 is a two-piece ABS solvent weld shower drain designed for efficient water drainage in shower installations. It features a durable construction and a chrome finish for aesthetic appeal.

Коопсуздук маалыматы

Always observe basic safety precautions when installing or maintaining plumbing fixtures. Failure to do so may result in personal injury or property damage.

• Ensure all local plumbing codes are followed.
• Коргоочу көз айнек жана кол кап сыяктуу тиешелүү жеке коргонуу шаймандарын (ЖКК) кийиңиз.
• Сантехникалык иштерди баштоодон мурун, негизги суу менен камсыздоону өчүрүңүз.
• Use only tools and materials specified for plumbing applications.
• Балдар жетпеген жерде сактаңыз.

Компоненттер

The PROFLO PFA600 Two-Piece ABS Shower Drain includes the following main components:

• Drain Body (ABS)
• Drain Grate (Chrome finish)
• Gasket/Seal
• Fasteners (if applicable for grate attachment)

Image: PROFLO PFA600 Shower Drain components, showing the brass threaded body and the chrome grate. The brass part is designed to connect to the plumbing, and the chrome grate sits on top.

Орнотуу жана орнотуу

This section outlines the general steps for installing the PROFLO PFA600 shower drain. For detailed, step-by-step instructions and diagrams, please refer to the official Орнотуу боюнча колдонмо (PDF) даярдоочу тарабынан берилген.

1. Prepare the Shower Pan: Ensure the shower pan or base is properly prepared according to its manufacturer's instructions, with the drain opening correctly sized and positioned.
2. Apply Solvent Cement: Apply ABS solvent cement to the inside of the drain body and the outside of the waste pipe.
3. Connect Drain Body: Firmly push the drain body onto the waste pipe, twisting slightly to ensure a secure, watertight seal. Hold in place for a few seconds as the cement sets.
4. Install Gasket/Seal: Place the rubber gasket or seal into the drain body, ensuring it sits flush.
5. Secure Grate: Position the chrome grate over the drain opening. Depending on the model, it may snap into place or be secured with screws.
6. Агышуу үчүн сыноо: After installation, perform a water test to check for any leaks before completing the shower enclosure.

Image: An installed PROFLO PFA600 Shower Drain, showing the circular chrome grate with multiple drainage holes. This is the visible part of the drain once installed in a shower floor.

Иштөө нускамалары

The PROFLO PFA600 is a passive drainage component and does not require active operation. Its function is to allow water to flow from the shower area into the plumbing system. Ensure the grate is free from obstructions for optimal performance.

Техникалык тейлөө

Regular maintenance will help ensure the longevity and proper function of your shower drain.

• үзгүлтүксүз тазалоо: Periodically remove the drain grate and clean any hair, soap scum, or debris that may have accumulated. Use a mild non-abrasive cleaner and a soft cloth.
• Катуу химиялык заттардан алыс болуңуз: Do not use abrasive cleaners, scouring pads, or harsh chemical drain cleaners, as these can damage the chrome finish and ABS material.
• Тоскоолдуктарды текшерүү: Ensure the drain opening is clear to prevent water pooling in the shower.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

For warranty information and customer support, please refer to the official ProFlo webсайтка же түздөн-түз кардарларды тейлөө бөлүмүнө кайрылыңыз. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

For additional assistance or technical inquiries, please visit the ProFlo Store on Amazon or consult the provided PDF manual.