Givi EH1110 Handguard Extensions Instruction Manual

1. Киришүү

Thank you for choosing the Givi EH1110 Handguard Extensions. These extensions are designed to enhance the protection offered by your motorcycle's original handguards, specifically for the Honda Crosstourer 1200 and DCT models. They provide improved wind deflection and reduce rider fatigue during rides.

Негизги өзгөчөлүктөрү:

• Manufactured from durable smoked plexiglass.
• Designed to fit seamlessly with the original handguards of compatible motorcycles.
• Effectively reduces wind buffeting around the hands and forearms.
• Contributes to reduced rider fatigue on longer journeys.
• Includes all necessary installation instructions and hardware.

2. Орнотуу жана орнотуу

The Givi EH1110 Handguard Extensions are designed for straightforward installation. Please follow these steps carefully to ensure proper fitment and safety.

Керектүү куралдар:

• Appropriate Allen keys or wrenches (refer to your motorcycle's manual for specific sizes if needed for original handguard removal).
• Беттерин коргоо үчүн жумшак кездеме.

Орнотуу кадамдары:

1. Мотоциклди даярдоо: Ensure the motorcycle is stable on its stand. Turn off the engine and remove the ignition key.
2. Монтаждоо пункттарын аныктоо: The EH1110 extensions are designed to attach directly to your motorcycle's existing original handguards. Locate the attachment points on the original handguards.
3. Кеңейтүүнү жайгаштырыңыз: Carefully align the Givi EH1110 extension with the original handguard. The extension should sit flush against the original part.
4. Secure the Extension: Using the provided hardware (screws, washers, nuts), attach the extension to the original handguard. Start by hand-tightening all fasteners to ensure correct alignment.
5. Акыркы бекемдөө: Once aligned, progressively tighten all fasteners using the appropriate tools. Do not overtighten, as this may damage the plexiglass or original handguard. Ensure all connections are secure.
6. Башка тарап үчүн кайталаңыз: Follow the same procedure for the handguard on the opposite side of the motorcycle.
7. Акыркы текшерүү: Before riding, visually inspect both handguard extensions to ensure they are firmly attached and do not interfere with the operation of the handlebars, levers, or other controls.

Note: If you are unsure about any step, it is recommended to consult a qualified mechanic or refer to the detailed instructions included in the product packaging.

Image 1: Close-up of the Givi EH1110 Handguard Extension installed.

3. Иштөө жана артыкчылыктар

Once installed, the Givi EH1110 Handguard Extensions operate passively by extending the protective area of your motorcycle's original handguards. Their primary function is to provide enhanced protection and comfort during your rides.

Негизги операциялык артыкчылыктар:

• Increased Wind Protection: The extended surface area deflects more wind away from your hands and forearms, particularly beneficial in colder weather or at higher speeds.
• Азайган чарчоо: By minimizing direct wind pressure on your hands, these extensions help reduce muscle fatigue, allowing for more comfortable and longer rides.
• Protection from Debris: They offer an additional barrier against small road debris, insects, and light precipitation, safeguarding your hands and controls.

Image 2: Honda Crosstourer 1200 with Givi EH1110 Handguard Extensions and other Givi accessories.

4. Техникалык тейлөө

To ensure the longevity and clear visibility of your Givi EH1110 Handguard Extensions, regular maintenance is recommended.

Тазалоо:

• Use a soft cloth and mild soap with water to clean the plexiglass surface.
• Avoid abrasive cleaners, solvents, or harsh chemicals, as these can scratch or damage the plexiglass.
• Таза суу менен жакшылап чайкап, жумшак, мамыксыз чүпүрөк менен кургатыңыз.

Текшерүү:

• Periodically check all mounting screws and fasteners to ensure they remain tight. Vibrations from riding can sometimes loosen connections.
• Inspect the plexiglass for any cracks or damage. While durable, plexiglass can be susceptible to impact damage. Replace damaged extensions to maintain optimal protection and appearance.

5. Кыйынчылыктарды

This section addresses common issues you might encounter with your Givi EH1110 Handguard Extensions.

Issue: Handguard Extension feels loose after installation.

• Чечим: Re-check all mounting screws and ensure they are tightened securely. Do not overtighten, but ensure a firm connection. If the issue persists, verify that the correct hardware was used and that the extension is properly seated against the original handguard.

Issue: Increased wind noise or buffeting after installation.

• Чечим: While designed to reduce buffeting, individual rider and motorcycle aerodynamics can vary. Ensure the extensions are installed symmetrically and correctly. If the issue persists, consider adjusting your riding posture or checking other wind-deflecting accessories on your motorcycle.

Issue: Plexiglass appears scratched or cloudy.

• Чечим: This is often due to improper cleaning. Use only soft cloths and mild soap. For minor scratches, specialized plexiglass polishing kits may be available. For significant damage or cloudiness that affects visibility, replacement is recommended.

6. Техникалык шарттар

7. Кепилдик маалыматы

Givi products are manufactured to high standards. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Givi webсайт. Адатта, кепилдик кадимки колдонуудагы өндүрүштүк кемчиликтерди камтыйт.

Ар кандай кепилдик дооматтары үчүн сатып алганыңыздын далилин сактаңыз.

8. Кардарларды колдоо кызматы

For technical assistance, installation queries, or parts replacement, please contact Givi customer support through their official webсайтына же жергиликтүү ыйгарым укуктуу дилериңизге кайрылыңыз.

Givi Official Webсайт: www.givi.it (Аймагыңызды текшериңиз webбайланыш маалыматтары үчүн сайт).

When contacting support, please have your product model number (EH1110) and proof of purchase readily available.