1. Киришүү
This manual provides essential information for the proper installation, operation, and maintenance of your Garmin Airmar B175M 010-11939-22 Transducer. The B175M is a high-performance, thru-hull transducer designed for marine applications, offering a 1 kilowatt power output and a depth capability of up to 1,700 feet. It operates within a medium-band frequency range of 85-135 kHz, providing excellent target separation and detail for various fishing and navigation needs.
2. Орнотуу жана орнотуу
Proper installation is crucial for the optimal performance of your B175M transducer. It is recommended that installation be performed by a qualified marine electronics technician.
2.1 Монтаждалуучу жер
The B175M is a thru-hull transducer, meaning it requires a hole to be drilled through the boat's hull. Select a location that is:
- Free from turbulence caused by propellers, keels, or other hull irregularities.
- Орнотуу жана техникалык тейлөө үчүн жеткиликтүү.
- Away from electrical interference sources.
2.2 Орнотуу кадамдары (Ашыкчаview)
- Prepare the Hull: Drill the appropriate size hole according to the transducer's shaft diameter. Ensure the hull surface is clean and dry.
- Герметикти колдонуу: Apply marine-grade sealant around the transducer shaft and mounting surfaces to ensure a watertight seal.
- Insert Transducer: Carefully insert the transducer through the hull from the outside.
- Secure Internally: From inside the hull, secure the transducer with the provided backing block and nut. Tighten securely, but do not overtighten.
- Маршруттук кабель: Route the transducer cable to your compatible Garmin display unit, avoiding sharp bends and potential damage.
- Туташуу: Connect the transducer cable to the designated port on your Garmin fish finder or chartplotter.
3. Иштөө нускамалары
Once installed and connected to a compatible Garmin marine display, the B175M transducer will automatically begin transmitting and receiving sonar signals.
3.1 Негизги операция
- Күйгүзүү: Ensure your Garmin display unit is powered on.
- Sonar View: Navigate to the sonar or fishfinder screen on your display.
- Жыштык тандоо: The B175M operates in a medium-band CHIRP frequency range (85-135 kHz). Your display unit will typically manage this automatically, but you may have options to adjust the frequency range for specific target detection or water conditions.
- Depth Reading: The transducer will provide real-time depth readings and display underwater structures and fish targets.
- Пайда/сезгичтик: Adjust the gain or sensitivity setting on your display to optimize the sonar image for clarity and target detection.
3.2 Ишти кароо
The performance of the transducer can be affected by boat speed, hull design, and water conditions. Experiment with settings and observe the sonar returns to understand how your transducer performs in different environments.
4. Техникалык тейлөө
Үзгүлтүксүз техникалык тейлөө сиздин өзгөрткүчүңүздүн узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылат.
- Тазалоо: Periodically inspect the transducer face for marine growth, dirt, or other obstructions. Clean with a soft cloth and mild soap and water. Avoid abrasive cleaners or tools that could scratch the transducer surface.
- Текшерүү: Check the transducer cable for any signs of wear, cuts, or damage. Ensure all connections are secure.
- Antifouling: If your boat is kept in water, apply a water-based antifouling paint specifically designed for transducers to prevent marine growth. Do not use solvent-based paints.
- Кыштоо: If storing your boat in freezing temperatures, ensure the transducer is not exposed to ice formation, which can cause damage.
5. Кыйынчылыктарды
If you experience issues with your transducer, review төмөнкү жалпы көйгөйлөрдү чечүү кадамдары:
- No Depth Reading:
- Check all cable connections between the transducer and the display unit.
- Ensure the display unit is powered on and configured correctly for the transducer.
- Inspect the transducer face for obstructions or marine growth.
- Өткөргүчтүн сууга толугу менен чөгүп кеткенин текшериңиз.
- Poor Sonar Image/Interference:
- Adjust the gain/sensitivity settings on your display.
- Check for sources of electrical interference (e.g., engine, other electronics).
- Ensure the transducer is mounted in a location free from turbulent water flow.
- Clean the transducer face.
- Үзгүлтүктүү окуулар:
- Кабелдик туташуулардын боштугун текшериңиз.
- Кабелдин бузулганын текшериңиз.
- Ensure stable power supply to the display unit.
If problems persist after performing these checks, contact Garmin customer support or a certified marine electronics technician.
6. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд | Garmin |
| Модель аты | Garmin Airmar B175M 010-11939-22 Transducer |
| Бөлүмдүн номери | 010-11939-22 |
| Power Output | 1 киловатт |
| Иштөө жыштыгы | 85-135 kHz (Medium CHIRP) |
| Максималдуу өлчөө тереңдиги | 1,700 фут (518 метр) |
| Монтаж түрү | Thru-Hull |
| Элемент Салмагы | 10.9 фунт (4.94 кг) |
| Материал | Plastic (Housing typically bronze for thru-hull) |
| UPC | 753759995768 |
7. Кепилдик жана колдоо
The Garmin Airmar B175M 010-11939-22 Transducer is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Garmin website. For technical assistance, troubleshooting beyond the scope of this manual, or warranty claims, please contact Garmin customer support directly.
Garmin колдоо: www.garmin.com/support
