Norton Abrasives 336G Norkut Disc 3X36 колдонуучусунун колдонмосу
Модели: 636425-03657
Introduction
This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your Norton Abrasives 336G Norkut Disc 3X36. Please read this manual thoroughly before using the product to ensure optimal performance and safety.
The Norton 336G Norkut Disc is a high-quality quick-change sanding disc designed for various finishing applications. Its aluminum oxide abrasive material and very fine 336 grit make it suitable for precise material removal and surface preparation.
Продукт бүттүview
1-сүрөт: Фронт view of the Norton 336G Norkut Disc. This image shows the dark gray abrasive disc with the "NORTON" logo prominently displayed on the top surface. The center features a threaded attachment point for quick-change systems, surrounded by embossed text indicating "MAX. RPM 21,000" and "Patent Protected," along with various safety symbols.
Коопсуздук маалыматы
WARNING: Always wear appropriate personal protective equipment (PPE) when operating power tools and abrasive products. This includes, but is not limited to, safety glasses, hearing protection, and gloves.
- Ensure the abrasive disc is compatible with your power tool's maximum RPM. The Norkut Disc has a maximum RPM of 21,000.
- Inspect the disc for any damage or wear before each use. Do not use damaged discs.
- Securely attach the disc to the tool according to the tool manufacturer's instructions.
- Do not apply excessive pressure, which can lead to disc breakage or premature wear.
- Чаң бөлүкчөлөрүн дем алуудан сактануу үчүн жакшы желдетилген жерде иштеңиз.
- Жанында тургандарды жумуш аймагынан алыс кармаңыз.
Жайгашуу
- Курал шайкештиги: Ensure your angle grinder, bench grinder, or die grinder is compatible with quick-change discs and has a spindle size that matches the disc's attachment.
- Электр энергиясын өчүрүү: Always disconnect the power tool from its power source before attaching or removing any accessories.
- Disc Attachment: Align the threaded center of the Norkut Disc with the spindle of your quick-change tool. Twist the disc clockwise onto the spindle until it is securely fastened. Do not overtighten.
- Ишке чейинки текшерүү: Once attached, manually spin the disc to ensure it is properly seated and there is no wobble.
Иштөө нускамалары
- Бетти даярдоо: Ensure the workpiece is clean and securely clampиш учурунда кыймылга жол бербөө үчүн.
- Tool Activation: With the disc securely attached and PPE worn, turn on your power tool. Allow the disc to reach full operating speed before contacting the workpiece.
- Колдонмо: Apply the disc to the workpiece with light, consistent pressure. Move the tool smoothly across the surface to achieve an even finish. Avoid dwelling in one spot, which can cause heat buildup or uneven material removal.
- Күмүш тандоо: The 336 grit is very fine and ideal for light material removal, blending, deburring, and surface conditioning. For heavier material removal, a coarser grit disc would be more appropriate.
- Муздатуу: For prolonged use, allow the disc and workpiece to cool periodically to prevent overheating, which can reduce disc life and affect performance.
- Аяктоо: Once the desired finish is achieved, lift the tool from the workpiece before turning off the power.
Техникалык тейлөө
- Текшерүү: Regularly inspect the disc for signs of wear, such as thinning, cracking, or excessive glazing. Replace the disc if any damage is observed.
- Тазалоо: Abrasive discs generally do not require cleaning. Avoid using liquids or solvents on the disc.
- Сактагыч: Store discs in a dry, cool place away from direct sunlight and humidity. Keep them flat to prevent warping.
- Жоюу: Dispose of worn or damaged discs responsibly according to local regulations.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Poor material removal / Glazing | Excessive pressure; incorrect grit for application; disc worn out. | Reduce pressure; use a coarser grit if needed; replace disc. |
| Ашыкча термелүү | Disc not properly seated; damaged disc; worn tool spindle. | Re-seat disc; replace disc; inspect tool for damage. |
| Premature disc wear | Excessive pressure; incorrect disc for material; improper storage. | Reduce pressure; ensure disc is suitable for workpiece; store properly. |
Техникалык шарттар
- Модел: 636425-03657
- Бренд: Norton Abrasives - St. Gobain
- Продукт түрү: Quick Change Disc / Sanding Disc
- Кумдук материал: Алюминий оксиди
- Grit Number: 336 (Very Fine)
- Өлчөмдөрү: 3 inches diameter x 36 grit (implied from 3X36)
- Элемент Салмагы: 11.85 ounces (as per product data, likely for a pack)
- Шайкеш түзмөктөр: Angle Grinder, Bench Grinder, Die Grinder
- Максималдуу RPM: 21,000
Кепилдик жана колдоо
For information regarding warranty coverage or technical support for your Norton Abrasives product, please refer to the official Norton Abrasives webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.
Официалдуу Webсайт: www.nortonabrasives.com
