1. Продукт бүтүп калдыview
The BeA Digital Transmitter is a compact, single-button device operating at a frequency of 433 MHz. It is designed for various remote control applications requiring a reliable digital signal transmission.
Негизги өзгөчөлүктөрү:
- Жыштыгы: 433 МГц
- Баскыч: (1) Single button for operation
- Компакт дизайн: Жеңил жана көчмө
- Келип чыгышы: Кытайда жасалган
Сүрөт 1: Алдыңкы view of the BeA Digital Transmitter. This image displays the compact black casing, the prominent single black button, and a small red LED indicator light located below the button. A metal key ring loop is visible at the top.
2. Орнотуу
The Digital Transmitter is designed for ease of use and typically requires minimal setup. Ensure the device has a working battery before operation.
2.1. Батареяны орнотуу/текшерүү
- Locate the battery compartment on the back or side of the transmitter. This may require a small screwdriver to open.
- Insert the required battery type (refer to the device's internal markings or packaging for specific battery type, typically a coin cell battery) ensuring correct polarity (+ and -).
- Батарея бөлүкчөсүн коопсуз жабыңыз.
- Test the transmitter by pressing the button; a small red indicator light should illuminate, confirming power.
2.2. Pairing (If Applicable)
This transmitter operates at 433 MHz. For integration with a receiver system, follow the pairing or learning instructions provided with your specific 433 MHz receiver unit. The transmitter sends a unique digital code when its button is pressed.
3. Иштөө нускамалары
Using the Digital Transmitter is straightforward.
- Ensure the transmitter has a functional battery.
- Point the transmitter towards the intended receiver (if directional operation is required by your receiver system).
- Press and hold the single button firmly for approximately 1-2 seconds.
- Observe the red indicator light on the transmitter; it should illuminate while the button is pressed, indicating a signal is being transmitted.
- Release the button once the desired action is performed by the receiver.
The effective range of the transmitter will vary depending on environmental factors, receiver sensitivity, and obstructions. For optimal performance, maintain a clear line of sight if possible.
4. Техникалык тейлөө
Proper maintenance ensures the longevity and reliable operation of your Digital Transmitter.
4.1. Батареяны алмаштыруу
When the red indicator light dims or fails to illuminate, or if the transmission range decreases significantly, it is likely time to replace the battery. Follow the battery installation steps outlined in Section 2.1.
4.2. Тазалоо
Clean the exterior of the transmitter with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.
4.3. Сактоо
Store the transmitter in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. If storing for extended periods, consider removing the battery to prevent leakage.
5. Кыйынчылыктарды
If you experience issues with your Digital Transmitter, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Transmitter not responding / Indicator light not illuminating. | Өлүк же туура эмес орнотулган батарея. | Батареяны туура полярдуулукту камсыз кылып, аны алмаштырыңыз. |
| Short transmission range or intermittent operation. | Low battery, interference, or obstructions. | Replace battery. Reduce distance to receiver. Remove obstructions. Check for strong interference sources (e.g., other 433 MHz devices). |
| Кабыл алуучу өткөргүчкө жооп бербейт. | Transmitter not paired with receiver, or receiver issue. | Ensure the transmitter is correctly paired with your receiver (refer to receiver's manual). Verify receiver is powered and functioning correctly. |
6. Техникалык шарттар
| Атрибут | Деталь |
|---|---|
| Модель номери | 10TD433HH1 |
| Бренд | BeA |
| Жыштык | 433 МГц |
| Button Count | 1 |
| Продукциянын өлчөмдөрү | 3.2 x 2.6 x 1.2 дюйм |
| Элемент Салмагы | 0.01 унция |
| ASIN | B00LU4I9NU |
| Өндүрүүчү | BEA |
| Дата биринчи жеткиликтүү | 28-сентябрь, 2011-жыл |
7. Кепилдик жана колдоо
7.1. Кепилдик маалыматы
Specific warranty details for the BeA Digital Transmitter are typically provided by the manufacturer at the time of purchase or can be found on the official BeA webсайт. Сураныч, кепилдик дооматтар үчүн сатып алуу далилиңизди сактап коюңуз.
7.2. Техникалык колдоо
For technical assistance, further troubleshooting, or inquiries regarding your BeA Digital Transmitter, please contact the manufacturer directly or refer to their official support channels. Contact information can usually be found on the manufacturer's webсайт же продукт таңгак.
кире аласыз BeA brand page on Amazon көбүрөөк маалымат алуу үчүн.
