GREENCUT GTC300XE бензин тиштүү дөңгөлөктүн колдонуу боюнча колдонмосу

1. Киришүү

This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your GREENCUT GTC300XE petrol tiller. Please read this manual thoroughly before using the machine to ensure proper handling and to prevent injury or damage.

The GREENCUT GTC300XE is a powerful and versatile petrol tiller designed for soil cultivation in gardens and agricultural fields. It features a 212cc 7hp 4-stroke engine with electric start, an 85cm working width, and three operational speeds (two forward, one reverse).

2. Коопсуздук нускамалары

Always prioritize safety when operating machinery. Failure to follow these instructions may result in serious injury or death.

• Толук колдонмону окуп чыгыңыз: Before assembly, operation, or maintenance, read and understand all instructions and warnings in this manual.
• Жеке коргонуу каражаттары (ЖКК): Always wear appropriate PPE, including safety glasses, hearing protection, sturdy footwear, and gloves.
• Күйүүчү май иштетүү: Petrol is highly flammable. Refuel in a well-ventilated area with the engine off and cool. Do not smoke or allow open flames near the machine.
• Иш чөйрөсү: Clear the work area of stones, debris, and other objects that could be thrown by the blades. Keep bystanders, children, and pets away from the operating area.
• Engine Hot: Кыймылдаткыч жана газ чыгаруу системасы иштөө учурунда абдан ысып, өчүрүлгөндөн кийин бир канча убакытка чейин ысык бойдон кала берет. Күйүктүн алдын алуу үчүн байланышуудан алыс болуңуз.
• Бычактын коопсуздугу: The tiller blades are sharp and rotate at high speed. Never touch the blades while the engine is running. Disconnect the spark plug wire before performing any maintenance on the blades.
• Бөөдө операция: Exercise extreme caution when operating on slopes. Operate across the face of slopes, never up and down. Avoid excessively steep slopes.
• Тейлөө: Perform all maintenance as described in this manual. Use only genuine replacement parts.

3. Чогултуу жана орнотуу

Follow these steps to assemble your GREENCUT GTC300XE tiller.

3.1 Кутудан чыгаруу жана компоненттерди текшерүү

Carefully remove all components from the packaging. Verify that all parts are present according to the packing list. If any parts are missing or damaged, contact customer support.

3.1-сүрөт: Жалпысынан view of the GREENCUT GTC300XE Petrol Tiller.

3.2 Рулдун монтажы

Attach the upper and lower handlebar sections using the provided bolts and nuts. Ensure all connections are secure. Adjust the handlebar height to a comfortable operating position, typically around waist height.

Сүрөт 3.2: Алдыңкы view showing the handlebar and engine.

3.3 Blade and Wheel Attachment

Install the hardened steel tiller blades onto the main shaft. Ensure they are correctly oriented for proper soil turning. Secure them with the retaining pins or bolts. Attach the transport wheels to the front or rear as per the design, ensuring they are firmly in place for stability during transport or storage.

3.3-сүрөт: Детальдуу view of the interchangeable hardened steel blades.

Figure 3.4: Detail of the robust transport wheel.

3.4 Adding Fuel and Oil

Before first use, fill the engine with appropriate 4-stroke engine oil (refer to specifications for type and capacity). Fill the fuel tank with unleaded petrol. Do not overfill. Always check oil and fuel levels before each use.

Figure 3.5: Engine and fuel tank area, showing the electric start controller.

3.5 Электрдик күйгүзгүчтү туташтыруу

Ensure the battery for the electric start system is charged and properly connected. Refer to the specific instructions for battery charging and connection if provided separately.

Figure 3.6: Electric start button and controller for easy engine ignition.

4. Иштөө нускамалары

Кыймылдаткычты иштетүүдөн мурун башкаруу элементтери менен таанышып алыңыз.

4.1 Операцияга чейинки текшерүү тизмеси

• Мотор майынын деңгээлин текшериңиз.
• Күйүүчү майдын деңгээлин текшериңиз.
• Inspect blades for damage or wear.
• Ensure all nuts, bolts, and fasteners are tight.
• Clear the work area of any obstacles.

4.2 Кыймылдаткычты от алдыруу (электрдик от алдыруу)

1. Күйүүчү май клапаны ачык экенин текшериңиз.
2. Set the choke lever to the 'CHOKE' position (cold engine).
3. Turn the ignition key or press the electric start button.
4. Мотор ишке киргенден кийин, кыймылдаткыч ысып жатканда, .Муунткуч рычагын акырындык менен 'RUN' абалына жылдырыңыз.

4.3 Engaging Gears and Tilling

The GTC300XE features 3 speeds: 2 forward (short and long) and 1 reverse. Select the desired gear using the gear lever. For initial tilling, start with a lower forward speed. The working width is 85cm, and the tilling depth can reach up to 35cm depending on soil conditions and machine adjustment.

Figure 4.1: Dimensions of the tiller, indicating its working capacity.

4.4 Моторду токтотуу

To stop the engine, move the throttle lever to the 'STOP' position or turn the ignition key to 'OFF'. Close the fuel valve if storing for an extended period.

5. Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө эгинин узак мөөнөттүү жана оптималдуу иштешин камсыз кылат.

• Тазалоо: After each use, clean soil and debris from the blades, chassis, and engine cooling fins.
• Бычак текшерүү: Regularly inspect the blades for wear, damage, or looseness. Replace worn or damaged blades promptly.
• Мотор майын алмаштыруу: Кыймылдаткычтын майын алгачкы 5 саат иштегенден кийин, андан кийин ар бир 25-50 саат сайын же жылына бир жолу, кайсынысы биринчи келсе, ошого жараша алмаштырып туруңуз.
• Аба чыпкасы: Clean the air filter regularly, especially in dusty conditions. Replace if damaged.
• Свеча: Inspect the spark plug annually. Clean or replace as necessary.
• Сактагыч: For long-term storage, drain the fuel tank or add a fuel stabilizer. Clean the machine thoroughly and store in a dry, protected area.

6. Кыйынчылыктарды

Бул бөлүм сиз кабылышы мүмкүн болгон жалпы көйгөйлөрдү карайт.

Эгерде бул чечимдерди колдонуп көргөндөн кийин көйгөйлөр чечилбесе, квалификациялуу тейлөө кызматкерлерине кайрылыңыз.

7. Техникалык шарттар

8. Кепилдик жана колдоо

For information regarding warranty coverage, spare parts availability, or technical support, please refer to the documentation provided with your purchase or contact Greencut customer service directly. Keep your proof of purchase for any warranty claims.

Please note that information on spare parts availability was not provided in the product details.