KFI Products 30-1100

KFI Products 30-1100 Tiger Tail сүйрөө системасынын колдонуу боюнча колдонмосу

Модели: 30-1100

1. Киришүү

The KFI Products 30-1100 Tiger Tail Tow System is a self-retracting tow rope designed for use with ATVs and UTVs. This system provides a convenient and integrated solution for vehicle recovery and towing operations. It is constructed for dependable performance in various environments.

Key features of the Tiger Tail Tow System include:

  • 12 feet of rope with an average breaking strength of 12,000 lbs.
  • Rope features a wear-resistant coating.
  • Equipped with a self-locking hook for secure attachment.
  • Constructed from 3/16-inch Grade 50 steel.
  • Features a fully sealed and lubricated mechanism, tested for durability.
  • Shot blasted and powder coated black for enhanced durability.
  • Designed for constant rope tension.
  • Integrated design for ATV/UTV use, eliminating the need to carry separate tow straps.

2. Коопсуздук маалыматы

Adhere to all safety guidelines to prevent injury or damage to property. Failure to follow these instructions may result in serious injury or equipment malfunction.

  • Always inspect the Tiger Tail Tow System, including the rope and hook, for any signs of wear, fraying, or damage before each use. Do not use if damaged.
  • Ensure all mounting hardware and connections are securely fastened before operating the system.
  • Do not exceed the rated average breaking strength of 12,000 lbs. Overloading can cause system failure.
  • Maintain a safe distance from the tow rope and vehicles during towing operations. Keep bystanders clear.
  • Avoid sudden jerks or excessive force when initiating a tow. Apply tension smoothly.
  • Never use the tow system for lifting or as a primary winching device. It is designed for towing and recovery.
  • Wear appropriate personal protective equipment, such as gloves, during operation.

3. Пакеттин мазмуну

Таңгактан чыгарууда бардык компоненттер бар экенин текшериңиз:

  • KFI Products 30-1100 Tiger Tail Tow System (1 unit)
  • Mounting Hardware (various bolts, nuts, washers for installation)

4. Техникалык шарттар

ӨзгөчөлүкСпецификация
Модель номери30-1100
БрендKFI продуктылары
Аркан узундугу12 фут (144 дюйм)
Аркан диаметри0.18 inches (3/16 inch)
Average Breaking Strength12,000 фунт
МатериалAlloy Steel (housing), Synthetic Rope
Бекер түрүHook (self-locking)
Унаа кызматынын түрүATV, UTV
Продукциянын өлчөмдөрү (L x W)144"L x 0.18"W (Rope), Unit dimensions vary by mounting configuration
Элемент Салмагы5 фунт
Өндүрүүчү бөлүгүнүн номери30-1100
OEM бөлүктүн номери101100
UPC705105085494

5. Орнотуу жана орнотуу

The KFI Products 30-1100 Tiger Tail Tow System is designed for integration with your ATV or UTV, typically fitting into a 2-inch receiver hitch. The unit can be configured in various ways to best suit your vehicle's specific requirements.

KFI Products 30-1100 Tiger Tail Tow System mounted on a receiver hitch

Image: The KFI Products 30-1100 Tiger Tail Tow System, showing the self-retracting rope mechanism and receiver hitch attachment point.

Орнотуу кадамдары:

  1. Монтаждоо ордун аныктоо: Determine the optimal mounting point on your ATV or UTV. The system is commonly installed in a 2-inch receiver hitch.
  2. Бирдикти жайгаштырыңыз: Place the Tiger Tail unit into the chosen mounting location. Ensure it is oriented correctly and does not obstruct any vehicle functions or components.
  3. Аппараттык камсыздоо менен коопсуз: Use the provided mounting hardware (bolts, nuts, washers) to securely fasten the Tiger Tail system to your vehicle. Tighten all fasteners according to your vehicle's specifications or until snug and secure.
  4. Туруктуулукту текшерүү: After installation, gently pull on the unit to ensure it is stable and does not exhibit excessive movement. Re-tighten any loose fasteners if necessary.
  5. Тазалоону текшерүү: Confirm that the installed unit does not interfere with the vehicle's suspension, tires, or other moving parts during full range of motion.

6. Иштөө нускамалары

The Tiger Tail Tow System is designed for straightforward operation. Follow these steps for effective towing and recovery:

  1. Prepare for Towing: Ensure both the towing vehicle and the vehicle to be towed are in appropriate positions. Clear the area of any obstructions or bystanders.
  2. Deploy the Rope: Grasp the self-locking hook and pull it outwards from the Tiger Tail unit. The rope will extend under constant tension.
  3. Илгичти бекитүү: Securely attach the self-locking hook to a designated recovery point on the vehicle being towed. Ensure the connection is firm and will not disengage during towing.
  4. Initiate Towing: Slowly and smoothly begin to move the towing vehicle. Avoid sudden acceleration or jerking motions, as this can damage the rope or vehicles.
  5. Монитордун иштеши: During towing, continuously monitor the rope and connections for any signs of stress or slippage.
  6. Retract the Rope: Once the towing operation is complete and the hook is safely disconnected from the towed vehicle, the rope will automatically retract back into the Tiger Tail unit due to its constant tension mechanism. Guide the rope to ensure smooth retraction.

7. Техникалык тейлөө

Regular maintenance ensures the longevity and reliable performance of your Tiger Tail Tow System.

  • Арканды текшерүү: Periodically inspect the entire length of the rope for any signs of fraying, cuts, abrasions, or other damage. If the rope shows significant wear, it may require replacement.
  • Механизмди текшерүү: Verify that the self-retracting mechanism operates smoothly. The unit features a fully sealed and lubricated mechanism; however, ensure no debris is impeding its function.
  • Тазалоо: Clean the exterior of the unit as needed to remove dirt, mud, or corrosive substances. Use mild soap and water, then rinse thoroughly. Avoid using harsh chemicals that could damage the powder coating or rope material.
  • Аппараттык камсыздоону текшерүү: Regularly check all mounting bolts and fasteners for tightness. Re-tighten as necessary to prevent loosening during vehicle operation.
  • Rope Replacement: The rope is a wear item. If replacement is necessary, it is recommended to contact KFI Products for guidance or professional service, as specialized procedures may be involved.

8. Кыйынчылыктарды

This section addresses common issues you might encounter with your Tiger Tail Tow System.

КөйгөйМүмкүн себепЧечим
Rope does not retract smoothly or fully.Debris in mechanism, damaged spring, or rope entanglement.Inspect for visible obstructions and remove. If the issue persists, contact KFI Products for service.
Rope shows signs of fraying or damage.Normal wear and tear, abrasion during use, or exceeding load limits.Discontinue use immediately. The rope must be replaced. Contact KFI Products for replacement rope and service instructions.
Unit feels loose after installation.Mounting hardware has loosened over time.Re-tighten all mounting bolts and nuts securely. Refer to installation steps.
Hook does not lock securely.Debris in locking mechanism or damaged hook.Clean the hook mechanism. If damaged, the hook or entire unit may need replacement.

9. Кепилдик жана колдоо

For information regarding product warranty, technical support, or service inquiries, please contact KFI Products directly. Details on warranty coverage and claims procedures are available through the manufacturer.

KFI Products Contact Information:
Please refer to the official KFI Products webакыркы байланыш маалыматы үчүн сайт же продукт таңгак.

Тектеш документтер - 30-1100

Preview KFI AMP-25-R2 2500 фунт ATV/UTV лебедкасынын колдонуучунун колдонмосу жана колдонуу боюнча нускамалары
Бул колдонмо KFI үчүн толук орнотуу, иштетүү, техникалык тейлөө, мүнөздөмөлөр, көйгөйлөрдү чечүү жана кепилдик жөнүндө маалыматты камтыйт AMP-25-R2 2500 фунт ATV/UTV лебедкасы. Оптималдуу иштөө үчүн лебедканы кантип коопсуз колдонууну жана тейлөөнү үйрөнүңүз.
Preview Polaris Ranger SP 570 лебедка орнотуу жана зымдары боюнча нускамалар (бөлүк №101980)
Polaris Ranger SP 570 үчүн KFI лебедка орноткучу (бөлүк №101980) үчүн деталдуу орнотуу жана зымдарды орнотуу нускамалары. Комплекттин компоненттери, этап-этабы менен монтаждоо жана электрдик туташуулар.
Preview Polaris Ranger XD 1500 Winch Mount Орнотуу боюнча колдонмо | KFI Products
Polaris Ranger XD 1500 үчүн иштелип чыккан KFI продуктуларынын лебедка орноткучу (бөлүгү №102180 Rev. A) үчүн деталдаштырылган орнотуу нускамалары. Компоненттерди аныктоо, монтаждоо кадамдары жана зымдарды туташтыруу.
Preview KFI Products Polaris Tall Glacier Adapter Plow Mount Орнотуу колдонмосу
KFI Products Polaris Tall Glacier Adapter Plow Mount (бөлүк №106630 Rev. A) үчүн деталдуу орнотуу нускамалары жана тетиктердин тизмеси. Polaris ATVs орнотуу боюнча кадам-кадам көрсөтмөлөрдү камтыйт.
Preview Honda Talon Winch Mount Орнотуу жана зымдары боюнча колдонмо - KFI продуктылары #102040
Honda Talon UTV үчүн иштелип чыккан KFI продуктуларынын лебедкасы үчүн комплекстүү орнотуу жана зымдарды орнотуу көрсөтмөлөрү. Бөлүктөрдүн деталдуу тизмеси, этап-этабы менен монтаждоо көрсөтмөлөрү жана электр туташуу жол-жоболорун камтыйт.
Preview KFI Products Universal ATV Плуг орнотуу боюнча колдонмо - Бөлүм № 105745
KFI Products Universal ATV сокосу үчүн орнотуу боюнча колдонмо (бөлүк № 105745). Этап-этабы менен монтаждоо нускамаларын, деталдык бөлүктөрдүн тизмесин жана шайкештик үчүн ATV'нин тайгалануучу пластинасын өзгөртүү боюнча көрсөтмөлөрдү берет.