Introduction
Сатып алганыңыз үчүн рахматasing the Klipsch R-10SW Powered Subwoofer. This manual provides essential information for setting up, operating, and maintaining your subwoofer to ensure optimal performance and longevity. The R-10SW is designed to deliver powerful, deep bass, enhancing both your music and movie listening experiences.
Please read these instructions thoroughly before connecting or operating your new subwoofer. Keep this manual for future reference.
Негизги өзгөчөлүктөрү
- Equally impressive with music and movies: Designed for versatile performance across various audio content.
- Low pass crossover and phase control: Allows for seamless integration with your main speakers and room acoustics.
- Line/LFE inputs for compatibility with most receivers: Provides flexible connection options for home theater systems.
Жайгашуу
Пакеттен чыгаруу жана текшерүү
Carefully remove the subwoofer from its packaging. Inspect the unit for any signs of damage during transit. If damage is present, do not use the unit and contact your dealer immediately.
Жайгаштыруу
Subwoofer placement can significantly impact bass performance. Experiment with different locations in your room to find the best sound. Generally, placing the subwoofer in a corner or along a wall can enhance bass output. Avoid placing it directly in the middle of a room, which can sometimes lead to bass cancellation.
Consider the "subwoofer crawl" method: Place the subwoofer in your primary listening position, then crawl around the room to find where the bass sounds best. That spot is often the ideal location for your subwoofer.
Сүрөт 1: Алдыңкы view of the Klipsch R-10SW Powered Subwoofer with grille removed.
Сүрөт 2: Алдыңкы view of the Klipsch R-10SW Powered Subwoofer with grille attached.
Байланыштар
The R-10SW offers both Line Level (RCA) and LFE (Low-Frequency Effects) inputs for connection to your receiver or ampөмүрлүү.
- LFE киргизүү: For receivers with a dedicated subwoofer output (LFE or Subwoofer Pre-Out), connect a single RCA cable from the receiver's subwoofer output to the R-10SW's LFE input. This is the most common and recommended connection for home theater systems.
- Сызык деңгээлиндеги киргизүүлөр (Сол/Оң): If your receiver does not have a dedicated LFE output, you can use the stereo RCA line-level outputs. Connect RCA cables from your receiver's stereo pre-out (e.g., Front Left/Right) to the R-10SW's Left and Right Line In jacks.
Сабвуферди күйгүзүүдөн мурун бардык туташуулар коопсуз экенин текшериңиз.
3-сүрөт: Арткы панелдин туташуулары жана башкаруу элементтери.
Сабвуфериңизди иштетүү
Controls Overview
The R-10SW features several controls on its rear panel to fine-tune its performance:
- GAIN (Үндү башкаруу): Adjusts the output level of the subwoofer. Start with this control at about half-way and adjust to blend with your main speakers.
- LOW-PASS (Crossover) Control: Determines the highest frequency the subwoofer will reproduce. Set this based on the low-frequency capabilities of your main speakers. A common starting point is 80Hz for most bookshelf or smaller floor-standing speakers. If using the LFE input, this control is typically bypassed, and the crossover is managed by your receiver.
- PHASE Switch (0°/180°): Adjusts the phase of the subwoofer's output relative to your main speakers. Flip between 0° and 180° to find the setting that provides the most impactful and seamless bass at your listening position.
- POWER Switch (ON/AUTO/OFF):
- КҮЙҮК: The subwoofer remains continuously on.
- АВТО: Сабвуфер аудио сигнал аныкталганда автоматтык түрдө күйөт жана бир аз убакыт иштебей тургандан кийин күтүү режимине өтөт.
- ӨЧҮК: Сабвуфер өчүрүлгөн.
Initial Setup and Tuning
- Connect the subwoofer to your receiver/amplifier as described in the "Connections" section.
- Set the GAIN control to its minimum (fully counter-clockwise).
- Set the LOW-PASS crossover to the recommended setting for your main speakers (e.g., 80Hz). If using LFE, set your receiver's subwoofer crossover.
- Set the PHASE switch to 0°.
- Set the POWER switch to AUTO.
- Play some familiar music or movie content with strong bass.
- Slowly increase the GAIN control until the subwoofer's bass output blends smoothly with your main speakers. The goal is to enhance the low end, not to overpower the sound.
- Experiment with the PHASE switch (0° vs. 180°). Choose the setting that provides the most coherent and impactful bass.
- Further fine-tune the LOW-PASS crossover if necessary to achieve the best blend.
Техникалык тейлөө
Your Klipsch R-10SW subwoofer requires minimal maintenance. To keep it in optimal condition:
- Тазалоо: Use a dry, soft cloth to wipe down the cabinet. Avoid using abrasive cleaners, solvents, or strong detergents, as they may damage the finish.
- Чаң: Regularly dust the grille and cabinet to prevent dust buildup, which can affect performance and appearance.
- Жайгашкан жери: Ensure the subwoofer is placed on a stable, level surface. Avoid placing it in direct sunlight or near heat sources.
- Вентиляция: Do not block the rear port or any ventilation openings. Ensure adequate airflow around the unit.
Проблемаларды чечүү
If you experience issues with your R-10SW subwoofer, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Үн жок |
|
|
| Бурмаланган же буми бас |
|
|
| Humming Noise |
|
|
Эгерде бул чечимдерди колдонуп көргөндөн кийин да көйгөй чечилбесе, Klipsch кардарларды колдоо кызматына кайрылыңыз.
Техникалык шарттар
Below are the technical specifications for the Klipsch R-10SW Powered Subwoofer:
| Спецификация | Нарк |
|---|---|
| Модель аты | R-10SW |
| Динамик түрү | Outdoor (Note: This might be a general category, the product is primarily for indoor home audio) |
| Өзгөчө өзгөчөлүк | Bass Boost, Travel (Note: "Travel" might be a miscategorization for a home subwoofer) |
| Продукт үчүн сунушталган колдонуу | Музыка, Фильмдер |
| Шайкеш түзмөктөр | Desktop, Television, Laptop (via receiver/ampөмүрлүү) |
| Сабвуфердин диаметри | 10 дюйм |
| Controller Type | Электр зымдары |
| Көлөмдүү үн каналынын конфигурациясы | 5.1 |
| Продукциянын өлчөмдөрү (D x W x Y) | 15.7"D x 12.5"W x 14"H |
| Элемент Салмагы | 25.5 фунт |
| Суу өткөрбөйт | ЖАЛГАН |
| Кепилдик түрү | Чектелген |
| Башкаруу ыкмасы | Remote (Note: This might refer to receiver remote control, as the unit itself doesn't come with one) |
| Зымсыз байланыш технологиясы | Bluetooth (Note: This subwoofer is wired, this might be a general spec for other Klipsch products or a miscategorization) |
| Динамик өлчөмү | 10 |
| Power Source | AC адаптер |
| Вуфердин диаметри | 10 дюйм |
| Сууга туруктуулук деңгээли | Сууга чыдамдуу эмес |
| Аудио драйвер түрү | Динамикалык драйвер |
| Аудио драйверинин өлчөмү | 1E+1 Inches (10 Inches) |
| Сабвуфердин туташуу технологиясы | Зымдуу |
| Connectivity Protocol | Bluetooth (Again, likely a general spec error for this wired subwoofer) |
| MP3 ойноткучту камтыйт? | Жок |
| Кубат деңгээли саны | 1 |
| UPC | 743878026146 |
| Өндүрүүчү | Klipsch |
| Дата биринчи жеткиликтүү | 6-август, 2014-жыл |
| Бренд | Klipsch |
| Динамиктин максималдуу чыгаруу күчү | 300 Ватт |
| Байланыш технологиясы | RCA |
| Аудио чыгаруу режими | Курчап |
| Монтаж түрү | Баяндамачы |
Сүрөт 4: Продукциянын өлчөмдөрү.
Кепилдик жана колдоо
Your Klipsch R-10SW Powered Subwoofer comes with a Чектелген Кепилдик. For detailed warranty information, terms, and conditions, please refer to the warranty card included with your product or visit the official Klipsch webсайт.
For technical support, product registration, or to find authorized service centers, please visit the Klipsch Official Store or their main support portal.
