Everbilt 3/10 HP чоюн соргуч насосунун колдонуучу колдонмосу
Model: HDS30
Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Everbilt 3/10 HP Cast Iron Sump Pump, Model HDS30. Please read this manual thoroughly before installation and retain it for future reference.
The Everbilt 3/10 HP submersible pump is constructed of heavy-duty cast iron and features a PSC motor for energy efficiency. It is engineered to pass 1/2 inch solids and features a vortex non-clogging impeller, making it suitable for sump, effluent, and dewatering applications such as basement sumps, mound systems, and septic tanks.
Коопсуздук маалыматы
ЭСКЕРТҮҮ: Бардык коопсуздук эскертүүлөрүн жана нускамаларын окуңуз. Эскертүүлөрдү жана нускамаларды аткарбоо электр шокуна, өрткө жана/же олуттуу жаракатка алып келиши мүмкүн.
- Насосту тейлөөдөн мурун ар дайым электр кубатынан ажыратыңыз.
- Do not operate the pump in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Ensure the pump is properly grounded to prevent electric shock.
- Do not use the pump to handle flammable or corrosive liquids.
- Колдорду, буттарды жана кийимдерди кыймылдуу бөлүктөрдөн алыс кармаңыз.
- Насосту анын электр шнурунан көтөрбөңүз.
- электр менен камсыз кылуу Voltage rating of the pump (115 Volts).
- This pump is designed for water only.
Продукт бүттүview
The Everbilt HDS30 sump pump is a robust unit designed for reliable water removal. Key components include the cast iron housing, PSC motor, and vertical float switch.
Сүрөт 1: Алдыңкы view of the Everbilt 3/10 HP Cast Iron Sump Pump, showing the main body and float switch assembly.
2-сүрөт: Каптал view of the sump pump, highlighting the discharge outlet and power cord.
3-сүрөт: Жогорку view of the sump pump, showing the handle and electrical connections.
Орнотуу жана орнотуу
Орнотууга чейинки текшерүү тизмеси:
- Verify power supply (115V AC).
- Ensure sump pit is clean and free of debris.
- Gather necessary tools and accessories (PVC pipe, check valve, adapters, etc.).
Орнотуу кадамдары:
- Насосту жайгаштыруу: Place the pump on a solid, level surface in the sump pit. Ensure the float switch has adequate clearance to move freely without obstruction.
- Connecting Discharge Pipe: Connect a 1-1/2 inch FNPT discharge pipe to the pump's outlet. It is recommended to use PVC pipe for durability.
- Installing Check Valve: Install an in-line check valve horizontally above the pump to prevent water from flowing back into the pit when the pump shuts off.
- Электр байланышы: Plug the pump's power cord into a properly grounded 115V AC outlet. Do not use extension cords.
- Сыноо: Fill the sump pit with water to activate the float switch and ensure the pump operates correctly and discharges water. Verify the check valve functions properly.
Сүрөт 4: Жакын пландан view of the pump's discharge outlet, where the discharge pipe connects.
5-сүрөт: Төмөнкү view of the sump pump, illustrating the intake area and stable base.
Suggested Pump Accessories:
| Аксессуар | Спецификация |
|---|---|
| In-Line Check Valve (install horizontally) | 1-1/2" FNPT |
| ПВХ адаптер | 1-1/2" ID Slip x 1-1/2" MNPT |
| PVC түтүк | 1-1/2" x distance pump to exit |
| PVC Adapters | 1-1/2" ID Slip 90 degree |
| Дарбаза клапаны | 1-1/2" |
| PVC Glue/Primer |
Table 1: Suggested accessories for optimal pump installation and performance.
Иштөө нускамалары
The Everbilt HDS30 sump pump operates automatically via its vertical float switch. When the water level in the sump pit rises and lifts the float to its activation point, the pump will turn on and begin discharging water. Once the water level drops and the float returns to its lower position, the pump will turn off.
Автоматтык иштетүү:
- Ensure the pump is plugged into a grounded 115V outlet.
- Verify the float switch moves freely and is not obstructed by the pit walls or other objects.
- The pump will activate automatically when water reaches the 'on' level and deactivate when it reaches the 'off' level.
Manual Operation (for testing):
To test the pump manually, you can carefully lift the float switch to its 'on' position. The pump should activate. Release the float, and the pump should deactivate once the float returns to its 'off' position.
Техникалык тейлөө
Regular maintenance ensures the longevity and efficient operation of your sump pump.
Ай сайын текшерүү:
- Inspect Sump Pit: Remove any debris, dirt, or sediment from the bottom of the sump pit that could obstruct the pump intake or float switch.
- Сыноо операциясы: Pour enough water into the sump pit to activate the pump. Ensure it turns on, pumps water out, and then turns off correctly.
- Check Float Switch: Verify the float switch moves freely without sticking or interference.
- Электр кабелин текшерүү: Check the power cord for any signs of damage, fraying, or wear.
Жылдык текшерүүлөр:
- Таза дөңгөлөк: Disconnect power and carefully inspect the impeller for any lodged debris. Clean as necessary.
- Агызуучу түтүктү текшерүү: Ensure the discharge pipe is clear and free of blockages.
- Inspect Check Valve: Verify the check valve is functioning properly and not leaking.
6-сүрөт: Жогорку view of the pump, illustrating the robust handle for easy lifting during maintenance.
Figure 7: Close-up of the vertical float switch, crucial for automatic operation.
Проблемаларды чечүү
This section provides solutions to common issues you might encounter with your sump pump.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Насос иштебейт. | No power; tripped circuit breaker; float switch obstructed or faulty. | Check power supply and circuit breaker. Clear any obstructions around the float switch. Test float switch manually. |
| Насос иштейт, бирок суу агып чыкпайт. | Discharge pipe blocked; check valve installed incorrectly or stuck; air lock; impeller clogged. | Check discharge pipe for blockages. Verify check valve orientation and function. Clear air lock by tilting pump. Disconnect power and inspect/clean impeller. |
| Насос үзгүлтүксүз иштейт. | Float switch stuck in 'on' position; check valve leaking; continuous water inflow. | Clear float switch obstructions. Inspect and replace faulty check valve. Investigate source of continuous water inflow. |
| Насостун циклдары өтө көп. | Sump pit too small; check valve leaking; float switch set too low. | Consider a larger sump pit. Inspect and replace faulty check valve. Adjust float switch if possible (not applicable for fixed vertical float). |
Table 2: Common troubleshooting steps for the Everbilt HDS30 sump pump.
Техникалык шарттар
Detailed technical specifications for the Everbilt 3/10 HP Cast Iron Sump Pump (Model HDS30).
| Өзгөчөлүк | Нарк |
|---|---|
| Бренд | Everbilt |
| Модель номери | HDS30 |
| Ат күчү (hp) | 0.3 аттын күчү (3/10 аттын күчү) |
| Тtage | 115 вольт |
| Ampөчүрүү (amps) | 6.5 Amps |
| Discharge Flow @ 0 ft. | 3160 gallons/hour |
| Discharge Flow @ 10 ft. | 2150 gallons/hour |
| Discharge Flow @ 15 ft. | 1500 gallons/hour |
| Турак жай материалы | Чоюн |
| Дөңгөлөктүү материал | Пластик |
| Катуу заттар менен иштөө | 1/2 дюйм |
| Насостун которгучунун түрү | Вертикалдуу |
| Кордун узундугу | 10 фут. |
| Продукт Салмагы | 24.14 фунт |
| Maximum жумушчу Температура | 104°F |
| Минималдуу иштөө температурасы | 33°F |
| Чыгып кетүү түтүгүнүн диаметри | 1-1/2 FPT |
| Сертификаттар | CSA тизмеленген |
Table 3: Technical specifications of the Everbilt HDS30 sump pump.
Figure 8: Comparison of Everbilt HDS30 features with a popular pro pump (3/10HP).
Кепилдик жана колдоо
For warranty information and customer support, please contact Everbilt directly or refer to the product packaging. Keep your purchase receipt as proof of purchase.
For further assistance or technical inquiries, please visit the official Everbilt webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз.
Note: Specific warranty terms and conditions may vary and are subject to change.
