SLIK Pro 700 BHX AMT Tripod with SBH-808DQ Ball Head

Introduction

The SLIK Pro 700 BHX AMT Tripod with SBH-808DQ Ball Head is engineered for stability and portability, utilizing SLIK's exclusive A.M.T. (Aluminum, Magnesium, Titanium) super alloy for its legs. This advanced material provides a 40% greater strength-to-weight ratio compared to standard aluminum, ensuring a rock-steady platform for your camera equipment without excessive weight.

This kit is built to handle heavy loads, supporting professional equipment up to 11 pounds. The integrated SBH-808DQ Ball Head features a unique circular quick-release plate, allowing for fast and intuitive camera attachment in any direction. It also includes separate lock and pan control knobs, along with a 90-degree U-shaped drop notch for enhanced versatility in various shooting scenarios.

The tripod's design incorporates a multi-function center column that can be removed and inverted, enabling ground-level and top-down perspectives not possible with traditional setups. Additionally, the patented "Rapid Flip Mechanism" facilitates one-handed leg angle adjustments, providing three distinct positions for optimal stability on uneven terrain or for achieving low-angle shots. Each leg section extends and retracts with ease, making setup and breakdown efficient.

The SLIK Pro 700 BHX AMT Tripod with SBH-808DQ Ball Head in its standard configuration.

Орнотуу жана чогултуу

1. Unfolding the Tripod Legs

To unfold the tripod, release the leg locks and extend each of the three leg sections. The legs feature a patented "Rapid Flip Mechanism" for quick angle adjustments. Simply pull the leg angle lock outward and adjust the leg to one of the three predefined positions. Ensure all leg locks are securely fastened before mounting equipment.

A hand demonstrating the operation of a leg lock on the tripod.

2. Attaching the Ball Head

The SBH-808DQ Ball Head comes pre-attached to the tripod. If it needs to be re-attached or replaced, ensure the mounting screw on the tripod's center column is aligned with the female thread on the ball head. Rotate the ball head clockwise until it is securely tightened. The mounting screw is a standard 1/4-inch male thread.

3. Камераны орнотуу

The SBH-808DQ Ball Head features a circular quick-release plate. Attach this plate to the bottom of your camera by screwing it into the camera's tripod mount. Once the plate is securely attached to your camera, align it with the quick-release receiver on the ball head and press down until it clicks into place. The circular design allows the plate to be inserted in any orientation, simplifying the mounting process.

Операция

1. Штативдин бийиктигин тууралоо

The tripod's height can be adjusted by extending the leg sections using the lever locks. For additional height, the center column can be raised. To do this, loosen the center column locking knob, extend the column to the desired height, and then tighten the knob securely. The maximum operating height is 75 inches.

The SLIK Pro 700 BHX AMT Tripod shown at its maximum extended height.

2. Inverting the Center Column

For extremely low-angle shots or macro photography, the center column can be inverted. To do this, fully extend the center column, then unscrew it from the tripod body. Reinsert the column upside down through the tripod's top plate and secure it with the locking knob. This allows the camera to be positioned between the legs, closer to the ground.

The tripod with its center column inverted for low-angle shooting.

3. Adjusting the SBH-808DQ Ball Head

The SBH-808DQ Ball Head features two main control knobs:

• Main Lock Knob: This large knob controls the movement of the ball. Loosen it to allow the camera to tilt and swivel freely. Tighten it to lock the camera in position.
• Pan Lock Knob: This smaller knob controls the horizontal panning motion. Loosen it to rotate the camera 360 degrees horizontally, ideal for panoramas. Tighten it to lock the panning motion.

The ball head also includes a 90-degree U-shaped drop notch, allowing for quick vertical orientation of the camera.

А деталдуу view of the SBH-808DQ Ball Head, showing its control knobs and quick-release system.

Техникалык тейлөө

Regular maintenance ensures the longevity and optimal performance of your SLIK tripod. After each use, especially in dusty or sandy environments, wipe down the legs and joints with a clean, dry cloth to remove any debris. Avoid using harsh chemicals or abrasive materials, as these can damage the finish and internal components.

Periodically check all screws and fasteners to ensure they are tight. If any part feels loose, gently tighten it. Do not overtighten, as this can strip threads or damage components. The leg locks and center column mechanism should operate smoothly. If they become stiff, a small amount of silicone-based lubricant can be applied, but avoid oil-based lubricants which can attract dirt.

Store the tripod in a dry, clean environment, preferably in its carrying case, to protect it from dust and moisture. Avoid storing it in extreme temperatures.

Проблемаларды чечүү

• Tripod is unstable: Ensure all leg sections are fully extended and their lever locks are securely closed. Check that the leg angle adjusters are fully engaged in one of the three positions. Verify that the center column locking knob is tightened if the column is extended.
• Camera is not secure on ball head: Make sure the quick-release plate is firmly attached to your camera and fully seated in the ball head's receiver. Ensure the main lock knob on the ball head is tightened sufficiently.
• Leg sections are difficult to extend/retract: Clean any dirt or grit from the leg sections and inside the lever locks. A small amount of silicone lubricant can be applied to the inner surfaces of the leg sections if needed.
• Ball head movement is stiff or jerky: Loosen the main lock knob slightly and try to move the ball. If it remains stiff, ensure no debris is caught in the mechanism. Avoid applying excessive force.

Техникалык шарттар

Кепилдик жана колдоо

For information regarding product warranty, technical support, or service, please refer to the official SLIK website or contact SLIK customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.