Bromic Heating Smart-Heat Platinum 500 Radiant Infrared Patio Heater User Manual

1. Киришүү

This manual provides essential information for the safe and efficient operation of your Bromic Heating Smart-Heat Platinum 500 Radiant Infrared Patio Heater. This natural gas heater delivers 39,800 BTU/hour of direct heat, designed to warm outdoor living spaces effectively. Please read all instructions carefully before installation and use.

Сүрөт 1: Алдыңкы view of the Bromic Heating Smart-Heat Platinum 500 Radiant Infrared Patio Heater.

2. Коопсуздук боюнча маанилүү маалымат

ЭСКЕРТҮҮ: Туура эмес орнотуу, тууралоо, өзгөртүү, тейлөө же тейлөө жаракатка же мүлккө зыян келтириши мүмкүн. Бул жабдууну орнотуудан же тейлөөдөн мурун орнотуу, иштетүү жана тейлөө нускамаларын кылдат окуп чыгыңыз.

• Ensure proper ventilation when operating the heater.
• Бензинди же башка күйүүчү бууларды жана суюктуктарды ушул же башка шайманга жакын жерде сактабаңыз же колдонбоңуз.
• Иштеп жаткан учурда балдарды жана үй жаныбарларын жылыткычтан алыс кармаңыз.
• Maintain clear distances from combustible materials as specified in the installation section.
• Бул продукт Калифорния штатына рак жана тубаса кемтиктерди же башка репродуктивдик зыян келтирерин белгилүү болгон химиялык заттарды камтыйт. (65-сунуш боюнча эскертүү)

3. Продукциянын өзгөчөлүктөрү

• Sleek Contemporary Styling: Features brushed stainless steel and tinted ceramic glass for an aesthetic design.
• Radiant Infrared Burner: Heats up quickly, providing direct heat to warm individuals in the area.
• Шамалдын каршылыгы: Designed to operate effectively in winds up to 12 miles per hour for consistent heating.
• Жөнгө салынуучу монтаждык кронштейн: The wall bracket houses the control system away from heat and allows the heater head to pivot 25-degrees to the left and right of center for directional heat.
• Ар тараптуу колдонмо: Турак жай жана соода орнотуулары үчүн ылайыктуу.
• Automatic Reignition: Provides continuous heat and convenience.
• Туруктуу курулуш: Made of stainless steel with a brushed finish.
• Electronic Ignition System: Requires 120V for operation.

Figure 2: The sleek design of the Bromic Platinum 500 heater.

4. Орнотуу

Installation of the Bromic Smart-Heat Platinum 500 heater should be performed by a qualified and licensed professional in accordance with local codes and regulations.

4.1 Монтаждоо параметрлери

The heater offers flexible mounting options:

• Дубалга орнотулган: Utilize the provided mounting bracket. The bracket allows the heater to pivot 25 degrees left or right.
• Ceiling Suspended: Can be hung from the ceiling using an optional Ceiling Post Mount (not included).

The optimum mounting height is 8 feet from the floor to the bottom of the heater. If the distance above the heater is less than 42 inches, or if the heater will be exposed to elements, an accessory Heat Deflector must be used.

3-сүрөт: Каптал view illustrating the mounting bracket and design.

4.2 Газ жана электр байланыштары

• Connect to a natural gas supply. All gas connections must comply with local codes.
• The electronic ignition system requires a 120V electrical supply. Ensure proper grounding.

5. Иштөө нускамалары

5.1 Жылыткычты ишке киргизүү

1. Газ менен камсыздоочу клапандын ачык болушун камсыз кылыңыз.
2. Activate the electronic ignition system (requires 120V). The heater features automatic reignition.
3. Allow a few minutes for the radiant elements to reach full operating temperature.

5.2 Adjusting Heat Direction

The mounting bracket allows the heater head to pivot 25 degrees to the left or right. Carefully adjust the heater's angle to direct heat to your desired area. Ensure the heater is cool before making physical adjustments.

5.3 Жылыткычты өчүрүү

1. Deactivate the electronic ignition system.
2. Close the main gas supply valve if the heater will not be used for an extended period.

6. Техникалык тейлөө

Regular maintenance ensures optimal performance and longevity of your heater. Always ensure the heater is completely cool and the gas supply is turned off before performing any maintenance.

• Тазалоо: Periodically clean the exterior surfaces with a soft, damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
• Керамикалык айнек: The tinted ceramic glass should be inspected for cracks or damage. Clean gently if necessary.
• Отун текшерүү: Annually, have a qualified technician inspect the burner and gas connections for any blockages or wear.
• Heat Deflector: If an optional heat deflector is installed, ensure it is free from debris.

7. Кыйынчылыктарды

If you encounter issues with your heater, refer to the following common troubleshooting steps. For complex problems, contact a qualified service technician.

7.1 Heater Not Igniting

• Check if the natural gas supply valve is fully open.
• Verify that the 120V electrical supply for the electronic ignition is active.
• Ensure there are no obstructions around the burner.

7.2 Insufficient Heat Output

• Confirm the heater is positioned correctly to direct heat to the desired area.
• Check for strong winds exceeding 12 mph, which can reduce heating effectiveness.
• Ensure the area is within the recommended heating coverage of 200 square feet.

8. Техникалык шарттар

Figure 4: Dimensional drawing of the heater.

9. Кепилдик жана колдоо

For warranty information and customer support, please refer to the documentation included with your product or visit the official Bromic Heating webсайт. Кепилдик дооматтары үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.