1. Киришүү
The Enttec Open DMX USB is an entry-level DMX interface designed to provide a simple and cost-effective solution for controlling DMX lighting fixtures from a computer. It is ideal for basic DMX control, amateur lighting applications, and troubleshooting DMX setups. This device connects to your computer via USB and provides a 5-pin DMX output.
Image 1.1: The Enttec Open DMX USB device, showcasing its compact design and primary connections.
2. Коопсуздук маалыматы
- Do not expose the device to rain or moisture. This unit is intended for indoor use only.
- капкакты чечпеңиз; ичинде колдонуучу тейлей турган бөлүктөр жок.
- Never connect DMX GND to an electrical 'earth' connection.
- For additional flexibility and increased protection, Enttec recommends the use of a DMX splitter.
3. Орнотуу
3.1. Системалык талаптар
- Operating System: Windows XP, Windows 7, Windows 8, Windows 10, macOS.
- Жеткиликтүү USB 2.0 порту.
- Compatible DMX control software.
3.2. Драйверди орнотуу
The Open DMX USB is discovered as a USB Serial Device or virtual COM Port depending on the FTDI driver installed on your system. Drivers are typically installed automatically by your operating system when the device is first connected. If not, please visit the official Enttec webакыркы драйверлерди жүктөп алуу үчүн сайт.
3.3. Аппараттык туташуу
- Connect the Enttec Open DMX USB device to an available USB port on your computer using a standard USB Type B cable. The device is designed to be powered from the computer over USB.
- Connect the 5-pin DMX XLR output of the Enttec Open DMX USB to the DMX input of your first DMX lighting fixture or DMX splitter. Ensure all DMX cables are properly terminated.
Image 3.1: Application diagram illustrating the connection flow from computer to DMX fixtures via the Open DMX USB.
4. Иштөө нускамалары
The Enttec Open DMX USB works with a wide range of third-party DMX control software. Once connected and drivers are installed, your software should recognize the device as a DMX output interface.
4.1. Программанын шайкештиги
This device is compatible with various DMX software applications. It provides a single DMX universe (512 channels) of output. The specific features and capabilities will depend on the software used.
Сүрөт 4.1: Бүттүview of key features and intended uses of the Open DMX USB.
4.2. Негизги операция
- Launch your preferred DMX control software.
- In the software's settings or preferences, select the Enttec Open DMX USB as your DMX output device.
- Configure your DMX fixtures within the software, assigning them to specific DMX channels.
- Begin sending DMX data from your software to control your lighting fixtures.
The device outputs up to 512 channels, with the exact number of usable channels depending on the software's capabilities.
5. Техникалык тейлөө
The Enttec Open DMX USB is a robust device designed for reliable operation. It requires minimal maintenance.
- Аппаратты таза жана чаңдан алыс кармаңыз. Тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз.
- Аппаратты экстремалдык температуранын же нымдуулуктун таасиринен сактаңыз.
- c ачууга аракет кылбаңызasing or modify the device, as this will void the warranty and may cause damage.
6. Кыйынчылыктарды
6.1. Device Not Recognized by Computer
- USB кабели аппаратка да, компьютерге да бекем туташып турганын текшериңиз.
- Компьютериңиздеги башка USB портун колдонуп көрүңүз.
- Verify that the necessary FTDI drivers are installed. Check your computer's Device Manager (Windows) or System Information (macOS) for the device. If drivers are missing, download them from the Enttec webсайт.
- Компьютериңизди өчүрүп күйгүзүңүз.
6.2. No DMX Output / Lights Not Responding
- Confirm that the Enttec Open DMX USB is selected as the output device within your DMX control software.
- Check all DMX cable connections between the interface and your fixtures. Ensure they are 5-pin DMX cables and are not damaged.
- Verify that your DMX fixtures are properly addressed and patched within your software.
- Ensure DMX termination is correctly applied at the end of your DMX chain.
- Test with a different DMX fixture or a DMX tester if available.
- Close and reopen your DMX control software.
7. Техникалык шарттар
Image 7.1: Detailed specifications from the product datasheet.
| Өзгөчөлүк | Деталь |
|---|---|
| Элемент Салмагы | 4.9 унция (139 грамм) |
| Продукциянын өлчөмдөрү (L x W x Y) | 2.48 x 1.57 x 1.58 дюйм (63 x 40 x 40 мм) |
| Дене материалы | Алюминий |
| Түс | Көк |
| Туташтыргыч түрү | XLR5 Male (DMX Out), USB Type Micro B |
| Аппараттык интерфейс | Micro USB B түрү |
| Киргизүү көлөмүtage | 5 Volts (DC) via USB |
| Киргизүү агымы | 300мА |
| Power Draw | 1.5 ватт |
| Maximum Output Channels | 1 universe (512 channels) |
| Maximum Output Refresh Rate | 40 FPS |
| IP рейтинги | IP20 |
| Операциялык системанын шайкештиги | Windows XP, Windows 7, Windows 8, Windows 10, macOS |
Image 7.2: Physical dimensions of the Enttec Open DMX USB.
8. Кепилдик
The Enttec Open DMX USB comes with a 3-year return-to-base manufacturer warranty. For warranty claims or service, please contact Enttec support or your authorized reseller.
9. Колдоо
For further support, driver downloads, software compatibility information, and frequently asked questions, please visit the official Enttec webсайт:
You may also contact Enttec customer service directly for technical assistance.
