Introduction
This manual provides detailed instructions for the proper setup, operation, and maintenance of your Airmax EcoSeries 1/2 Horsepower Floating Fountain Kit. Adhering to these guidelines will ensure optimal performance and longevity of your fountain. Please read all instructions carefully before installation and operation.
Компоненттер камтылган
Your Airmax EcoSeries Floating Fountain Kit arrives in a single box and includes the following components:
- Төмөн Проfile Float: A beautifully designed float for stable fountain placement.
- Energy-Efficient Motor: A fully sealed, asynchronous motor with a stainless steel suction screen, body, and motor lead.
- Электр кабели: Equipped with a strain relief and quick disconnect for easy connection. Standard length is 100 feet; longer cords are available separately.
- Башкаруу панели: Features a Ground Fault Circuit Interrupter (GFCI), timer, and photo cell for automated operation.
- Three Spray Pattern Nozzles: Includes Classic, Trumpet, and Crown & Trumpet patterns for varied visual displays.

Эскертүү: Mooring lines are not included due to varying pond shapes and sizes. It is recommended to use vinyl-coated galvanized wire with four cable clamps, two carabiners, and two stakes for secure installation.
Орнотуу жана орнотуу
Follow these steps for proper installation of your floating fountain:
- Ensure Adequate Power: Verify that a suitable power source is close enough to your pond. If not, it is highly recommended to use a licensed electrician to properly run power to the pond area.
- Тоо башкаруу панели: Mount the control panel in a fixed position near the power source.
- Чачыратуучу үлгүнү тандаңыз: The Classic nozzle is pre-installed. To change the spray pattern, simply unscrew the nozzle nut, remove the current nozzle, and replace it with your desired pattern (Trumpet or Crown & Trumpet). Screw the nozzle nut back into place.
- Агрегатты чогултуу:
- Lay the float flat on the ground with the Airmax logo facing up.
- Place the fountain motor assembly into the center of the float.
- Lift the float straight up and ensure that the fountain motor leads pass through the center hole.
- Gently lay the fountain to one side.
- Securely attach the power cord to the fountain motor lead quick disconnect. Store the protective caps for winter removal.
- Attach the power cord strain relief to the loop underneath the float mount ring.
- Attach the mooring lines (not included) to these loops as well.
- Place Fountain in Water: Pick up the fountain by the float and place it into the water. A minimum water depth of 24 inches is required for proper operation.
- Secure Fountain Position:
- Place a stake securely into the ground on one side of the pond.
- Tie one side of a mooring line to this stake.
- Take the other stake and the remaining mooring line and walk it around the pond, carefully pulling the fountain across the water to your desired position.
- Once the fountain is in position, tie the second mooring line to the second stake and place it securely into the ground.
- Ensure both mooring lines are snug to prevent the fountain from twisting and shifting during operation.


For a visual guide on installation, please watch the official product video below:
Операция
Once the fountain is installed and secured, follow these steps to begin operation:
- Connect Control Panel to Power: Plug the control panel into a suitable outdoor power source.
- GFCI баштапкы абалга келтирүү: Ensure the GFCI reset button on the control panel is pushed in.
- Таймерди коюу: Set the timer pins on the control panel to your desired run cycles or for 24-hour continuous operation.
- Plug in Fountain: Plug the fountain's power cord into the control panel outlet labeled "Fountain."
The unit should now be up and running, providing a beautiful display and aeration for your pond.

Техникалык тейлөө
Periodic maintenance is crucial to ensure optimal performance and longevity of your Airmax EcoSeries Floating Fountain. Always disconnect all power from the fountain before attempting any maintenance.
- Таза кабыл алуу экраны: Regularly clean the intake screen of any debris, algae, or aquatic weeds. For ponds with heavy debris, consider installing an optional motor sock pre-filter on the intake screen to increase time between routine maintenance.
- Кышкы сактоо: In cooler climates, it is recommended to remove the fountain from the pond before ice begins to form. Before storing, clean or power wash any debris on the unit. Store the fountain in a place above freezing temperatures.
- Spring Reinstallation: Before reinstalling in the spring, check the condition of the power cord and quick disconnects. Replace any cracked O-rings as necessary.
Проблемаларды чечүү
If your Airmax EcoSeries Floating Fountain is not operating as expected, consider the following common issues and solutions:
- Fountain Not Running:
- Check if the control panel is plugged into a live power source.
- Ensure the GFCI reset button on the control panel is pushed in.
- Verify the timer settings are correct and the fountain is scheduled to run.
- Confirm the fountain's power cord is securely plugged into the "Fountain" outlet on the control panel.
- Weak or Intermittent Spray:
- Check the motor's intake screen for clogs from debris, algae, or weeds. Clean thoroughly if obstructed.
- Ensure the water depth is at least 24 inches. Insufficient depth can affect pump performance.
- Fountain Twisting or Shifting:
- Verify that both mooring lines are snug and securely anchored to the stakes. Adjust tension as needed.
Техникалык шарттар
| Модель номери: | 652883 |
| Бренд: | Airmax |
| Кубат булагы: | Corded Electric (115 Volt) |
| Ат күчү: | 1 / 2 HP |
| Корндун узундугу: | 100 feet (Standard) |
| Продукциянын өлчөмдөрү: | 35 x 17 x 35 дюйм |
| Элемент Салмагы: | 55.6 фунт |
| Minimum Operating Depth: | 24 дюйм |
| Биринчи жеткиликтүү датасы: | 31-октябрь, 2014-жыл |
Кепилдик жана колдоо
Warranty information for your Airmax EcoSeries Floating Fountain Kit is typically provided with the product at the time of purchase or can be obtained directly from the manufacturer, Airmax, Inc. Please refer to the documentation included in your product packaging for specific warranty terms and conditions.
For technical support, replacement parts, or any inquiries regarding your fountain, please contact Airmax, Inc. directly. Contact information is usually available on the product packaging or their official webсайт.





