Defiant 270 градус кара түстөгү сырткы кыймыл сенсорун алмаштыруу боюнча колдонмо

1. Продукт бүтүп калдыview

The Defiant DF-5716-BK is a 270-degree black replacement outdoor motion sensor designed to enhance security and convenience for outdoor lighting systems. This sensor detects motion within its specified range and activates connected lights, providing illumination when needed. It is suitable for various outdoor applications, including gardens, terraces, and walkways, and is compatible with Heath Zenith Par Lights.

Image 1: Defiant DF-5716-BK 270 Degree Black Replacement Outdoor Motion Sensor. This image displays the compact, black-colored motion sensor unit with its distinctive curved detection lens and adjustable mounting base.

2. Коопсуздук маалыматы

Бул продуктуну орнотуудан же иштетүүдөн мурун бардык көрсөтмөлөрдү окуп чыгып, түшүнүп алыңыз. Бул көрсөтмөлөрдү аткарбоо электр тогуна урунууга, өрткө же мүлккө зыян келтирүүчү же жеке жаракатка алып келүүчү башка коркунучтарга алып келиши мүмкүн.

• ЭСКЕРТҮҮ: Электр шок коркунучу. Орнотуудан же тейлөөдөн мурун автоматтык өчүргүчтү же сактагыч кутучасын электр кубатынан ажыратыңыз.
• Бардык электр байланыштары жергиликтүү коддорго жана эрежелерге ылайык жасалганын текшериңиз.
• This product is designed for outdoor use and is waterproof. However, ensure proper sealing during installation to maintain its integrity.
• Do not attempt to modify or repair the sensor. Refer all servicing to qualified personnel.
• Таңгактоочу материалдарды балдардан алыс кармаңыз.

3. Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:

• Defiant 270 Degree Replacement Motion Sensor (Model DF-5716-BK)
• Mounting hardware (typically screws and wire nuts)
• Көрсөтмө (бул документ)

4. Техникалык шарттар

5. Орнотуу

This section provides general guidelines for replacing an existing motion sensor. Specific wiring diagrams may vary; always consult the original fixture's instructions or a qualified electrician if unsure.

1. Кубатты өчүрүү: Locate the circuit breaker or fuse that supplies power to the outdoor light fixture and turn it OFF. Verify power is off using a voltage сыноочу.
2. Эски сенсорду алып салуу: Carefully disconnect the wiring from the old motion sensor. Note the wire connections (typically Line, Load, and Neutral/Ground).
3. Жаңы сенсорду даярдоо: Thread the wires from the new Defiant motion sensor through the mounting plate or fixture opening.
4. Зым байланыштары:
   • туташтыруу кара зым сенсордон баштап black (hot) wire электр менен жабдуудан.
   • туташтыруу кызыл зым сенсордон баштап black (load) wire жарык приборунун.
   • туташтыруу ак зым сенсордон баштап white (neutral) wire from the power supply and the light fixture.
   • туташтыруу жер зымы (bare copper or green) from the sensor to the fixture's ground wire and the house ground wire.

   Бардык байланыштарды зым гайкалар жана электр скотч менен бекитиңиз.

5. Тоо сенсору: Securely attach the new motion sensor to the fixture or mounting box using the provided hardware. Ensure it is oriented correctly for optimal detection.
6. Мөөр байланыштары: Apply weather-resistant sealant around the mounting base to prevent water intrusion, especially if exposed to direct weather.
7. Күчтү калыбына келтирүү: Электрди өчүргүчтөн кайра күйгүзүңүз.

6. Орнотуу жана тууралоо

After installation, adjust the sensor's settings for optimal performance.

• Сыноо режими: Most motion sensors have a test mode. Upon initial power-up, the sensor may enter a test mode where lights turn on for a short period (e.g., 5-10 seconds) with each detection, regardless of ambient light. This allows for quick aiming and sensitivity testing.
• Сезимталдыкты жөндөө: Use the sensitivity dial (if present) to adjust how easily the sensor detects motion.
  • Turn clockwise for higher sensitivity (detects smaller movements or at greater distances).
  • Turn counter-clockwise for lower sensitivity (reduces false triggers from small animals or distant objects).
• Убакытты тууралоо: Use the time dial (if present) to set how long the light remains on after motion is no longer detected. Common settings range from a few seconds to several minutes.
• Light Level (Dusk-to-Dawn) Adjustment: Some sensors include a photocell adjustment to determine the ambient light level at which the sensor becomes active. This prevents the light from turning on during daylight hours.
• Aiming the Sensor: Physically adjust the sensor head to cover the desired detection area. Walk through the intended detection zone to verify coverage and make fine adjustments.

7. Иштөө нускамалары

Once installed and adjusted, the Defiant motion sensor operates automatically:

• During nighttime (or when ambient light is below the set threshold), the sensor will detect motion within its 270-degree, 100-foot range.
• Upon detection, the connected light fixture will illuminate for the duration set by the time adjustment dial.
• If motion continues to be detected, the light will remain on or reset its timer.
• After motion ceases and the set time expires, the light will turn off.
• During daylight hours (or when ambient light is above the set threshold), the sensor will typically remain inactive, conserving energy.

8. Техникалык тейлөө

The Defiant motion sensor requires minimal maintenance to ensure continued performance.

• Тазалоо: Periodically wipe the sensor lens with a soft, damp cloth to remove dust, dirt, or debris that may obstruct its view. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
• Текшерүү: Annually inspect the sensor and its wiring for any signs of damage, wear, or loose connections. Ensure the mounting remains secure.
• Тоскоолдуктар: Keep the detection area clear of growing foliage, branches, or other objects that could block the sensor's view же жалган триггерлерди жаратышы мүмкүн.

9. Кыйынчылыктарды

If your motion sensor is not functioning as expected, try the following steps:

10. Кепилдик жана колдоо

This Defiant motion sensor comes with a 1 жылдык чектелген кепилдик сатып алынган күндөн тартып. Бул кепилдик нормалдуу колдонуудагы материалдардагы жана жасалгадагы кемчиликтерди камтыйт.

For warranty claims, technical assistance, or further inquiries, please contact Defiant customer support. Keep your proof of purchase for warranty validation.

Contact information for Defiant customer support can typically be found on the product packaging or the official Defiant webсайт.