1. Орнотуу нускамалары
Before using your Fellowes Saturn 3i A3 Laminator, ensure it is properly set up to guarantee optimal performance and safety.
Пакеттен чыгаруу жана жайгаштыруу
Carefully remove the laminator from its packaging. Place the laminator on a stable, flat surface with adequate space around it for proper ventilation and document feeding. Ensure the power switch is in the 'OFF' position before connecting to a power source.
Image: The Fellowes Saturn 3i A3 Laminator shown with its included starter laminating pouches, ready for initial setup.
Power Connection and Warm-up
Connect the power cord to a suitable electrical outlet. Turn the power switch to the 'ON' position. The laminator features InstaHeat Technology, allowing it to warm up and be ready for use in just 60 seconds. Wait for the 'Ready' indicator light to illuminate before proceeding with lamination.
Image: Visual representation of key features including InstaHeat for fast warm-up, Auto Shut-off for energy saving, and Jam Free operation.
2. Иштөө нускамалары
Follow these steps for effective and safe lamination with your Saturn 3i A3.
Selecting Pouch Thickness
The Saturn 3i A3 is compatible with 80, 100, or 125 micron laminating pouches. Select the appropriate setting on the control panel for the thickness of the pouch you are using. Incorrect settings can lead to poor lamination quality or machine damage.
Inserting Documents
Place your document centrally within the laminating pouch, ensuring there is an even border around the edges. Insert the sealed edge of the pouch into the laminator's entry slot. The laminator will automatically feed the pouch through.
Image: The laminator actively processing a document, demonstrating the feeding mechanism.
Lamination Process
Allow the laminator to complete the cycle. Once the laminated document exits the machine, place it on a flat surface to cool and harden. For best results, avoid touching the laminated document until it has fully cooled.
Image: A user demonstrating the ease of use of the Fellowes Saturn 3i A3 Laminator in a typical office or classroom environment.
Jam Detection and Release
The laminator features a jam detection system. In case of a misfeed or jam, the system will alert you. Use the manual jam release lever to safely remove the misfed pouch. This prevents damage to both the document and the machine.
Image: Various items such as ID badges, menus, notices, and photos are shown, illustrating the versatility of the laminator for different document types.
3. Техникалык тейлөө
Regular maintenance ensures the longevity and consistent performance of your laminator.
Роликтерди тазалоо
The laminator includes a Clean Alert sensor to indicate when cleaning is recommended. To clean the rollers, feed a cleaning sheet (included in the starter kit) through the machine. This helps remove adhesive residue and dust, preventing lamination imperfections.
Автоматтык өчүрүү өзгөчөлүгү
The laminator is equipped with an auto shut-off function that activates after 30 minutes of inactivity. This feature conserves energy and helps prolong the life of the machine. To resume operation, simply turn the power switch off and then on again.
Жалпы кам көрүү
Wipe the exterior of the laminator with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the machine is unplugged before cleaning.
4. Кыйынчылыктарды
If you encounter issues with your laminator, refer to the following common problems and solutions.
Laminator Not Turning On
- Ensure the power cord is securely plugged into both the laminator and a working electrical outlet.
- Кубат баскычы "ON" абалында экенин текшериңиз.
- Башка аспапка туташтыруу менен электр розеткасынын иштешин текшериңиз.
Document Jams
- If a pouch jams, immediately use the manual jam release lever to free the document.
- Ensure pouches are inserted straight and centered.
- Do not use pouches that are too thick for the laminator's capacity (max 125 micron).
Poor Lamination Quality (Bubbles, Wrinkles, Cloudy Finish)
- Ensure the correct temperature setting is selected for the pouch thickness.
- Feed the pouch with the sealed edge first.
- Use a cleaning sheet to clean the rollers if the Clean Alert sensor is active or if residue is visible.
- Ensure documents are flat and free of creases before lamination.
- Allow the laminated document to cool completely on a flat surface after exiting the machine.
Laminator Not Heating Up
- Confirm the power is on and the 'Ready' indicator light is not illuminated. If it's not heating, try turning the unit off and on again.
- Allow the full 60 seconds for InstaHeat technology to warm up.
5. Техникалык шарттар
| Спецификация | Деталь |
|---|---|
| Бренд | Жолдоштор |
| Модель номери | 5736101 |
| Продукциянын өлчөмдөрү | 20.94 x 5.75 x 4.13 дюйм |
| Элемент Салмагы | 5.08 фунт (2.31 кг) |
| Жылытуу убактысы | 60 seconds (InstaHeat Technology) |
| Pouch Compatibility | 80, 100, 125 micron |
| Документтин максималдуу өлчөмү | A3 |
| Ламинациялоо ылдамдыгы | Up to 50cm per minute |
| Автоматтык өчүрүү | 30 мүнөт аракетсиздиктен кийин |
| Материалдын түрү | Металл |
| Түс | Black Or White |
| Биринчи жеткиликтүү күн | 21-январь, 2015-жыл |
6. Кепилдик жана колдоо
For detailed warranty information, please refer to the warranty card included with your product packaging. Fellowes provides support for its products to ensure customer satisfaction.
Кардарларды колдоо
If you require further assistance, have questions not covered in this manual, or need to report a defect, please contact Fellowes customer support. Contact details can typically be found on the Fellowes official webсайтында же продуктунун таңгагында.
When contacting support, please have your product model number (5736101) and purchase date readily available.
