PROFLO PF5112HE Jerrit дааратканасынын багы үчүн колдонмо

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your PROFLO PF5112HE Jerrit Toilet Tank. Please read all instructions carefully before beginning installation or use to ensure proper function and safety.

2. Коопсуздук маалыматы

• Кандайдыр бир орнотууну же тейлөөнү баштоодон мурун ар дайым ажатканага болгон сууну өчүрүңүз.
• Орнотуу учурунда кол кап жана көздү коргоо сыяктуу тиешелүү жеке коргоочу шаймандарды кийиңиз.
• Ceramic products can be heavy and fragile. Handle with care to prevent damage or injury.
• Ensure all connections are tightened securely to prevent leaks, but do not overtighten, which can crack ceramic or strip threads.
• Сунуш 65 Эскертүү: Бул продукт сизге химиялык заттардын, анын ичинде коргошундун таасирин тийгизиши мүмкүн, ал Калифорния штатына рак жана тубаса кемтик же башка репродуктивдүү зыян алып келиши белгилүү. Көбүрөөк маалымат алуу үчүн өтүңүз www.P65Warnings.ca.gov.

3. Пакеттин мазмуну

Your PROFLO PF5112HE Jerrit Toilet Tank package includes the following components:

• PROFLO PF5112HE Jerrit Toilet Tank (Vitreous China)
• Танк капкагы
• Pre-installed fill valve and flush valve assembly
• Tank-to-bowl gasket
• Tank-to-bowl bolts, washers, and nuts
• Toilet base bolt caps

Note: A toilet bowl and toilet seat are not included with this tank and must be purchased separately.

4. Орнотуу үчүн зарыл болгон куралдар

• Жөнгө салынуучу ачкыч
• Screwdriver (Phillips or flathead, depending on bolt type)
• Кычкач
• Өлчөө лентасы
• Bucket and sponge (for cleanup)
• New water supply line (recommended)

5. Орнотуу боюнча нускамалар

Follow these steps to install your PROFLO PF5112HE Jerrit Toilet Tank onto a compatible toilet bowl.

1. Даараткананы даярдаңыз: Ensure the toilet bowl is clean and free of any old gaskets or debris. The bolt holes on the bowl should align with the tank's bolt spacing (approximately 5.5 inches center-to-center). The drain hole should be compatible with a 2-inch drain.
2. Install Tank-to-Bowl Gasket: Place the large rubber tank-to-bowl gasket over the flush valve opening on the bottom of the toilet tank. Ensure it is seated firmly and evenly.
3. Танкты жайгаштыруу: Carefully lift the toilet tank and align the bolt holes on the tank with the bolt holes on the toilet bowl. Gently lower the tank onto the bowl, ensuring the gasket creates a seal.
4. Танкты камсыз кылуу: Insert the tank-to-bowl bolts through the tank and bowl holes. Place washers and nuts onto the bolts from underneath the bowl. Hand-tighten the nuts initially, then use an adjustable wrench to tighten them evenly, alternating between bolts. Do not overtighten, as this can crack the ceramic. The tank should be stable but not excessively rigid.
5. Суу менен камсыздоону туташтыруу: Connect a new water supply line (recommended) from the shut-off valve to the fill valve on the bottom of the tank. Hand-tighten, then use a wrench for a final quarter-turn.
6. Суу менен камсыздоону калыбына келтирүү: Slowly turn on the water supply valve. Check for any leaks around the tank-to-bowl connection and the water supply line. Tighten connections slightly if leaks are observed.
7. Суунун деңгээлин текшерүү: Allow the tank to fill. The water level should stop below the overflow tube. Adjust the fill valve if necessary to achieve the correct water level.
8. Install Tank Lid: Place the tank lid securely on top of the tank.

6. Иштөө нускамалары

The PROFLO PF5112HE Jerrit Toilet Tank is designed for efficient flushing with a 1.28 gallons-per-flush (GPF) rate.

• To flush, press down firmly on the flush lever located on the side of the tank.
• For a thorough flush, hold the lever down until the tank is completely empty.
• Allow the tank to refill completely before flushing again.

7. Техникалык тейлөө

• Тазалоо: Clean the exterior of the tank with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals that can damage the ceramic finish.
• Ички компоненттери: Periodically inspect the fill valve, flush valve, and flapper for wear or damage. Replace components as needed to maintain optimal performance and prevent leaks.
• Агышты аныктоо: Regularly check for visible leaks around the base of the tank, the water supply line, and inside the tank. Address any leaks promptly to prevent water damage.

8. Кыйынчылыктарды

• Көйгөй: Туалет үзгүлтүксүз иштейт же цикл менен күйүп-өчөт.
  Чечим: Check the fill valve for proper adjustment. Ensure the water level is not too high, causing water to flow into the overflow tube. Inspect the flapper for a proper seal; replace if worn or damaged.
• Көйгөй: Начар же толук эмес агызуу.
  Чечим: Ensure the water level in the tank is at the maximum recommended level. Adjust the fill valve if the water level is too low. Check that the flapper opens fully and stays open long enough for the tank to empty.
• Көйгөй: Leaks around the base of the tank.
  Чечим: Turn off the water supply. Gently tighten the tank-to-bowl bolts evenly. If the leak persists, the tank-to-bowl gasket may need to be replaced.
• Көйгөй: Slow tank refill.
  Чечим: Check the water supply valve to ensure it is fully open. Inspect the fill valve for any obstructions or debris that might be restricting water flow.

9. Техникалык шарттар

10. Кепилдик жана колдоо

For detailed warranty information and customer support, please refer to the official PROFLO website or the documentation included with your product. You may also contact PROFLO customer service directly for assistance with product inquiries, parts, or troubleshooting not covered in this manual.