Introduction
The Skytech SKY-3301 is a remote control system designed for gas heating appliances, offering safe, reliable, and user-friendly operation. This system includes a remote transmitter with a timer and thermostat function, and a receiver unit. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and safety.
Коопсуздук маалыматы
- Орнотуудан жана иштетүүдөн мурун бардык нускамаларды кылдат окуп чыгыңыз.
- Ensure all wiring is performed by a qualified technician if you are unsure.
- Do not expose the remote or receiver to water or excessive humidity.
- Батареяларды балдар жетпеген жерде сактаңыз.
- Always turn off the gas supply to the appliance before performing any wiring or maintenance.
Пакеттин мазмуну
Сиздин пакетте бардык компоненттер бар экенин текшериңиз:
- SKY-3301 Remote Control Transmitter
- Кабыл алуучу бирдиги
- AAA Batteries (2 for remote, 4 for receiver)
- Wall Mount Plate for Receiver (optional)
- Туташтыргычтары бар зым шнурлары
Орнотуу жана орнотуу
1. Install Batteries in Remote Transmitter
Open the battery compartment on the back of the remote control. Insert two (2) AAA batteries, ensuring correct polarity. Close the compartment securely.
Image: Skytech SKY-3301 Remote Control Transmitter. This image shows the front of the remote control with its LCD display and control buttons.
2. Install Batteries in Receiver Unit
The receiver unit requires four (4) AA batteries. Open the battery compartment on the receiver and insert the batteries, observing the correct polarity. Close the compartment.
Image: Skytech SKY-3301 Receiver Unit. This image displays the black receiver box with a 'LEARN' button, an OFF/REMOTE/ON switch, and wiring connections.
3. Connect Receiver to Fireplace Gas Valve
The receiver connects to the millivolt gas valve of your fireplace. Ensure the gas supply to the fireplace is turned off before proceeding.
- Locate the terminal block on your millivolt gas valve. It typically has terminals labeled TH (Thermostat) and TP (Thermopile).
- Connect the two wires from the receiver unit to the TH and TP terminals on the gas valve. The polarity does not matter for these connections.
- If your fireplace has a pilot light, ensure it is lit according to your fireplace manufacturer's instructions.
Image: Wiring Diagram for Skytech SKY-3301 Receiver. This diagram illustrates how to connect the remote receiver to the terminal block on a millivolt gas valve and the thermopile/pilot light.
4. Pairing the Remote Transmitter and Receiver (Learning Function)
The remote and receiver must be paired for communication. This is often referred to as the 'learning' function.
- Ensure the receiver's slide switch is in the 'REMOTE' position.
- Press and hold the 'LEARN' button on the receiver unit for approximately 3 seconds until you hear a beep.
- Within 10 seconds, press any button on the remote control transmitter.
- The receiver will emit a series of beeps, confirming that the remote and receiver are paired.
Иштөө нускамалары
Remote Control Display and Buttons
The remote control features an LCD display and several buttons for various functions:
- LCD дисплей: Shows current room temperature, set temperature, time, and operational mode (ON, THERMO, FLAME).
- MODE баскычы: Cycles through ON, THERMO, and OFF modes.
- ЖОГОРУ / ТӨМӨН баскычтары: Adjust temperature settings, time, or timer duration.
- TIMER / TIME Button: Used to set the current time and activate the countdown timer.
- SET баскычы: Confirms settings for time, timer, and temperature.
Иштөө режимдери
- КҮЙҮК режими: Press the MODE button until 'ON' appears on the display. The fireplace will turn on and remain on until manually turned off or switched to another mode.
- THERMO Mode: Press the MODE button until 'THERMO' appears. The fireplace will cycle on and off to maintain the set temperature. Use the UP/DOWN buttons to adjust the desired temperature, then press SET.
- ӨЧҮРҮҮ РЕЖИМИ: Press the MODE button until 'OFF' appears. The fireplace will turn off.
Убакытты коюу
- Press and hold the TIMER/TIME button until the time display flashes.
- Use the UP/DOWN buttons to adjust the hour, then press SET.
- Use the UP/DOWN buttons to adjust the minutes, then press SET.
Артка саноо таймерин орнотуу
- With the fireplace in ON or THERMO mode, press the TIMER/TIME button once. The timer display will flash.
- Use the UP/DOWN buttons to set the desired countdown duration (e.g., 1 hour, 30 minutes).
- Press SET to confirm. The fireplace will turn off automatically after the set time expires.
Техникалык тейлөө
Батареяны алмаштыруу
Replace batteries in both the remote transmitter and receiver unit annually, or when the display becomes dim or the range decreases. Always replace all batteries at the same time with new ones of the same type.
- Алыстан: Two (2) AAA batteries.
- Алуучу: Four (4) AA batteries.
Тазалоо
Wipe the remote and receiver with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Fireplace does not turn on/off with remote. |
|
|
| Remote display is dim or blank. | Пульттун батареялары аз. | Алыскы батареяларды алмаштырыңыз. |
| Температураны окуу туура эмес көрүнөт. | Remote placed in an area with drafts or direct heat. | Relocate the remote to a central area away from drafts, windows, or heat sources. |
| Алыскы аралык кыскарган. | Батареялардын кубаты аз же тоскоолдуктар көп. | Replace batteries. Ensure no large metal objects or other RF devices are blocking the signal. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | СкайТех |
| Модель аты | SKY-3301 |
| Controller Type | Hand Control |
| Өзгөчө өзгөчөлүк | Ergonomic design, Programmable Thermostat, Timer |
| Түс | Боз |
| Байланыш технологиясы | RF (Радио жыштыгы) |
| Камтылган компоненттер | Remote, Receiver, Batteries |
| Power Source | Батарея менен иштейт |
| Алыскы Батарейкалар | 2 x AAA (кошулган) |
| Кабылдагычтын батареялары | 4 x AA (киргизилген) |
| Материал | Пластик |
| Дисплей түрү | Арткы жарык менен LCD |
| Башкаруу ыкмасы | Пульт, баскыч менен башкаруу |
| Mounting Type (Receiver) | Дубалга орнотуу (милдеттүү эмес) |
| Продукциянын өлчөмдөрү (болжол менен) | 3 x 3 x 6 дюйм (Алуучу) |
| Элемент Салмагы (болжол менен) | 12.8 унция |
Кепилдик жана колдоо
This Skytech product is covered by the manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions. For technical support or warranty claims, please contact Skytech customer service directly.
For further assistance, visit the official Skytech website or contact their customer support line. Keep your purchase receipt and model number (SKY-3301) handy when contacting support.
