1. Киришүү
This manual provides essential information for the proper installation, operation, and maintenance of your STEPPERONLINE Nema 23 CNC Stepper Motor, model 23HS22-2804S. Please read this manual thoroughly before using the product to ensure safe and efficient operation.
The Nema 23 stepper motor is designed for precision motion control applications, commonly found in CNC machines, 3D printers, and other automated systems. It features a 1.8-degree step angle, providing 200 steps per revolution, and a holding torque of 1.24Nm (175.6 oz.in).
2. Коопсуздук маалыматы
⚠ ЭСКЕРТҮҮ:
- Кубат менен камсыздоого туташуу: Always ensure the motor is connected to a constant current or chopper drive controller. Connecting the motor directly to a power supply will destroy the motor.
- Электр коопсуздугу: Exercise caution when working with electrical components. Ensure all power is disconnected before making or changing connections.
- Жылуулук: Stepper motors can generate heat during operation. Ensure adequate ventilation or heat dissipation if operating at high currents or for extended periods.
- Механикалык коопсуздук: Ensure the motor is securely mounted before operation to prevent injury or damage.
3. Продукттун спецификациялары
Сүрөт 3.1: Алдыңкы view of the STEPPERONLINE Nema 23 Stepper Motor.
3.1 Электрдик мүнөздөмөлөр
| Параметр | Нарк |
|---|---|
| Өндүрүүчү бөлүгүнүн номери | 23HS22-2804S |
| Мотор түрү | Bipolar Stepper |
| Кадам бурч | 1.8 deg. (200 steps/revolution) |
| Моментти кармоо | 1.24Nm (175.6 oz.in) |
| Rated Current/Phase | 2.8A |
| Фазалык каршылык | 0.9 Ом |
| Индуктивдүүлүк | 2.5mH +/- 20% (1KHz) |
3.2 Физикалык спецификациялар
| Параметр | Нарк |
|---|---|
| Frame Size | 57 x 57mm (2.24" x 2.24") |
| Body Length | 56мм (2.2") |
| Валдын диаметри | 6.35мм (0.25") |
| Shaft Length | 21мм |
| Number of Leads | 4 |
| Коргошун узундугу | 500мм |
| Салмагы | 700г (1.5 фунт) |
Figure 3.2: Dimensional drawing of the Nema 23 Stepper Motor (Model 23HS22-2804S) with key measurements in millimeters.
4. Орнотуу жана зымдар
Proper wiring is crucial for the correct operation of your stepper motor. Refer to the wiring diagram below for connection details.
4.1 Байланыш диаграммасы
Figure 4.1: Wiring diagram and step sequence for the Nema 23 Stepper Motor. The left side shows the coil connections, and the right side illustrates the step sequence for clockwise (CW) and counter-clockwise (CCW) rotation.
The motor features 4 leads for bipolar connection. Connect these leads to your stepper motor driver according to the following color code:
- Кара: A+
- Жашыл: A-
- Кызыл: B+
- Көк: B-
Ensure that the connections are secure and correctly matched to your stepper motor driver's terminals. Incorrect wiring can lead to improper motor function or damage.
5. Иштөө нускамалары
This stepper motor operates by converting digital pulses from a controller into precise mechanical rotational movements. Each pulse moves the motor by a fixed step angle (1.8 degrees in this case).
5.1 Driver Compatibility
This motor requires a constant current or chopper drive controller capable of supplying 2.8A per phase. Using a driver that cannot meet these current requirements may result in reduced torque or missed steps. Ensure your driver is appropriately sized for this motor's specifications.
5.2 Негизги операция
- Айдоочуга туташуу: Wire the motor to a compatible stepper motor driver as detailed in Section 4.
- Күйгүзүү: Apply power to the stepper motor driver.
- Send Pulses: Use your CNC controller or microcontroller to send step and direction pulses to the driver. The driver will translate these signals into the appropriate coil energization sequence to rotate the motor.
- Орнотууларды тууралоо: Depending on your application, you may need to adjust micro-stepping, current limits, and acceleration/deceleration settings on your driver for optimal performance.
6. Техникалык тейлөө
Stepper motors are generally low-maintenance devices. However, adhering to a few guidelines can extend their lifespan and ensure reliable operation:
- Тазалыкты сактоо: Periodically clean the motor's exterior to prevent dust and debris buildup, which can affect heat dissipation.
- Экологиялык шарттар: Operate the motor within its specified temperature and humidity ranges. Avoid exposure to excessive moisture or corrosive environments.
- Байланыштарды текшерүү: Regularly inspect wiring connections for looseness or damage. Secure connections prevent intermittent operation and potential electrical issues.
- Валды текшерүү: Ensure the motor shaft is free from obstructions and rotates smoothly. Avoid applying excessive radial or axial loads that could damage the bearings.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Motor does not move or vibrates | Incorrect wiring; insufficient current from driver; driver not enabled; mechanical binding. | Verify wiring against diagram (Section 4.1); check driver current settings; ensure driver is enabled; inspect mechanical load for obstructions. |
| Motor loses steps or stalls | Overload; acceleration/deceleration too high; insufficient current; excessive speed. | Reduce mechanical load; decrease acceleration/deceleration rates; increase driver current (within motor limits); reduce maximum speed. |
| Мотор ысып кетет | Excessive current setting; poor ventilation; continuous high load. | Reduce driver current (if possible without losing torque); ensure adequate airflow around motor; consider adding a heatsink or fan; reduce duty cycle. |
| Ызы-чуу операция | Micro-stepping settings; mechanical resonance; loose mounting. | Adjust micro-stepping settings on driver; check for mechanical resonance in the system; ensure motor is securely mounted. |
8. Кепилдик жана колдоо
For warranty information and technical support, please refer to the official STEPPERONLINE webсайтка же сатуучуга кайрылыңыз. Кепилдик дооматтар үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.
Өндүрүүчү: OSM Technology Co.,Ltd.
Бренд: STEPPERONLINE
Webсайт: www.omc-stepperonline.com
