Everbilt 1/4 HP байлоочу насосу, колдонуучунун колдонмосу

Introduction

This manual provides detailed instructions for the safe and efficient operation, installation, and maintenance of your Everbilt 1/4 HP Submersible Sump Pump with Tether. Designed for durability with reinforced aluminum housing, this pump is suitable for 14-inch basins and larger, offering reliable water removal for your home. Please read this manual thoroughly before installation and operation to ensure proper use and to prevent injury or damage.

Маанилүү коопсуздук маалыматы

Always follow basic safety precautions when installing, operating, or maintaining this product to reduce the risk of fire, electric shock, and personal injury.

• Электр коопсуздугу: Ensure the pump is connected to a properly grounded outlet. Do not remove the grounding prong. Do not use extension cords.
• Суу жана электр энергиясы: Never handle the pump or its power cord with wet hands or while standing in water. Always disconnect power before servicing.
• Submersible Use Only: This pump is designed for submersible use in water only. Do not use it for flammable liquids, corrosive chemicals, or in dry conditions.
• Температуранын чектери: Do not pump water hotter than 104°F (40°C).
• Балдар жана үй жаныбарлары: Keep children and pets away from the sump pit area.
• Туура орнотуу: Ensure the pump is installed in a basin of adequate size (14 inches or larger) to allow for proper float switch operation.

Пакеттин мазмуну

Before beginning assembly or installation, ensure all parts are present and accounted for. If any parts are missing or damaged, do not attempt to install or operate the pump. Contact customer service for assistance.

• Everbilt 1/4 HP Submersible Sump Pump with Tether
• Колдонуучу жана кам көрүү боюнча колдонмо (бул колдонмо)

Image shows the Everbilt 1/4 HP Submersible Sump Pump, its retail packaging, and the included Use and Care Guide. The pump is black with a tethered float switch and power cord. The box highlights key features such as 1/4 HP, 3,000 gallons per hour capacity, and a 1-year warranty.

Орнотуу жана орнотуу

Proper installation is crucial for the efficient and safe operation of your sump pump. Follow these steps carefully:

1. Basin Даярдоо: Ensure your sump basin is clean and free of debris. The basin should be at least 14 inches in diameter to allow for proper float switch operation.
2. Насостун жайгашуусу: Насосту суу куюучу жайдын түбүндөгү катуу, тегиз жерге коюңуз.asin. Avoid placing it directly on dirt or gravel, which can clog the intake.
3. Агызуучу түтүктү туташтыруу: Connect a discharge pipe (typically 1-1/4 inch or 1-1/2 inch PVC pipe) to the pump's discharge port. Use a check valve (not included) in the discharge line to prevent water from flowing back into the basin насос өчүп калганда.
4. Tether Switch Adjustment: The tethered float switch controls the pump's on/off cycles. Adjust the tether length to ensure the pump turns on before water reaches a critical level and turns off after the water is sufficiently removed, without running dry. Ensure the float can move freely without obstruction.
5. Электр байланышы: Plug the pump's power cord into a dedicated, grounded 120V AC outlet. Do not use extension cords or adapters. Ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI).
6. Сыноо операциясы: Fill the sump basin with water to verify the pump turns on and off correctly as the water level rises and falls. Check for any leaks in the discharge line.

Иштөө нускамалары

The Everbilt 1/4 HP Submersible Sump Pump operates automatically via its tethered float switch. Once properly installed and plugged in, the pump will activate when the water level in the sump basin rises, causing the float switch to lift. It will continue to pump water out until the water level drops, allowing the float switch to fall and deactivate the pump.

Regularly inspect the sump basin and pump for any obstructions or debris that could interfere with the float switch or pump operation.

Техникалык тейлөө

Routine maintenance helps ensure the longevity and reliable performance of your sump pump.

• Ай сайын текшерүү: Сумпа bны мезгил-мезгили менен текшерип туруңузasin for accumulated dirt, silt, or debris that could clog the pump's intake screen or interfere with the float switch. Clean as necessary.
• Float Switch текшерүү: Manually lift the float switch to ensure it activates the pump. Ensure it moves freely without sticking.
• Чыгуу линиясы: Inspect the discharge pipe for any blockages or leaks. Ensure the check valve is functioning correctly.
• Кышка даярдоо (эгер бар болсо): If the pump is in an area subject to freezing temperatures and will not be used, disconnect it, clean it thoroughly, and store it in a warm, dry place to prevent freezing damage.
• Электр кабели: Inspect the power cord for any signs of damage or fraying. Do not use the pump if the cord is damaged.

Проблемаларды чечүү

Жалпы көйгөйлөр жана аларды чечүү жолдору үчүн төмөнкү таблицага кайрылыңыз.

Техникалык шарттар

Кепилдик жана колдоо

Кепилдик: This Everbilt sump pump comes with a 1 жылдык Чектелген Кепилдик сатып алынган күндөн тартып. Бул кепилдик нормалдуу колдонуудагы материалдардагы жана жасалгадагы кемчиликтерди камтыйт. Кепилдик дооматтары үчүн сатып алганыңыздын далилин сактап коюңуз.

Кардарларды колдоо: For questions, problems, or missing parts, please contact Everbilt Customer Service before returning to the store. Customer service is available Monday-Friday, 8 a.m. - 6 p.m. EST.

Телефон: 1-844-241-5521

Webсайт: HOMEDEPOT.COM

Thank you for choosing Everbilt. We appreciate the trust and confidence you have placed in our submersible sump pump. We strive to continually create quality products designed to enhance your home.