1. Киришүү
This instruction manual provides detailed information for the installation, operation, and maintenance of the Came KIARO LED 24V Flasher Replacement Board (Model RIR455). Please read this manual thoroughly before proceeding with any installation or maintenance to ensure proper function and safety.
The Came KIARO LED 24V Flasher Replacement Board is designed as a direct replacement component for compatible Came KIARO LED flasher units. It operates on a 24V DC/AC power supply.
2. Коопсуздук маалыматы
- Электр коркунучу: Installation and maintenance must be performed by qualified personnel only. Disconnect power before working on the unit.
- Шайкештик: Ensure the replacement board is compatible with your existing flasher unit and electrical system (24V DC/AC).
- Туура куралдар: Use appropriate tools for installation to prevent damage to the board or existing components.
- Экологиялык шарттар: Тактаны нымдуулукка, өтө жогорку температурага же коррозиялуу чөйрөлөргө дуушар кылбаңыз.
3. Продукт бүтүп калдыview
The Came KIARO LED 24V Flasher Replacement Board is a printed circuit board (PCB) designed to restore the flashing functionality of a Came KIARO LED signal lamp. It features a compact design with necessary electronic components for LED control and power regulation.
1-сүрөт: Жогорку view of the Came KIARO LED 24V Flasher Replacement Board. This image shows the green PCB with a vertical LED strip, a capacitor, and various surface-mounted components. A green terminal block for power connection is visible on the left.
2-сүрөт: The Came KIARO LED 24V Flasher Replacement Board partially installed within its black protective housing. The image highlights how the board fits into the flasher unit, with the 24V power input visible.
4. Орнотуу жана орнотуу
- Электр энергиясын өчүрүү: Before beginning any work, ensure that the main power supply to the flasher unit is completely disconnected. Verify with a voltage сыноочу.
- Access the Flasher Unit: Carefully open the housing of the existing Came KIARO LED flasher unit. Refer to the original flasher unit's manual for specific instructions on opening the enclosure.
- Эски тактаны алып салуу: Disconnect all wiring from the old flasher board. Note the polarity and connection points. Gently unmount the old board from its position.
- Жаңы тактаны орнотуу: Position the new Came KIARO LED 24V Flasher Replacement Board (RIR455) into the housing. Ensure it is securely seated and aligned with any mounting points.
- Зымдарды туташтыруу: Reconnect the power supply wires to the 24V DC/AC terminal block on the new board. Pay close attention to polarity if applicable (for DC systems). The terminal block is typically labeled.
- Коопсуз турак-жай: Once the board is installed and wired, carefully close and secure the flasher unit housing, ensuring all seals are properly seated to maintain weather resistance.
- Кайра туташтыруу: Restore power to the flasher unit.
5. Иштөө нускамалары
The Came KIARO LED 24V Flasher Replacement Board operates automatically once installed and powered. It is designed to control the flashing sequence of the LED light within the compatible Came KIARO flasher unit.
- Upon power-up, the LED should begin its standard flashing pattern.
- The flashing frequency is pre-set by the board's internal circuitry and is not user-adjustable.
- Ensure the flasher unit is integrated correctly with your gate automation system for synchronized operation.
6. Техникалык тейлөө
The Came KIARO LED 24V Flasher Replacement Board is designed for long-term, maintenance-free operation. However, periodic checks of the overall flasher unit are recommended.
- Визуалдык текшерүү: Periodically inspect the flasher unit for any signs of physical damage, loose connections, or ingress of water/debris.
- Тазалоо: If necessary, gently clean the exterior of the flasher unit with a soft, damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Кубат текшерүү: Ensure stable 24V DC/AC power supply to the unit.
- Кесиптик кызмат: For any internal issues or complex repairs, contact a qualified technician.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| LED does not flash. | No power supply, incorrect wiring, faulty board. |
|
| Irregular flashing pattern. | Unstable power supply, internal component issue. |
|
| No light from LED. | Faulty LED on the board, power issue. |
|
8. Техникалык шарттар
- Модел: RIR455
- Бренд: келди
- Киргизүү көлөмүtage: 24V DC/AC
- Продукциянын өлчөмдөрү: 1.8 x 1.33 x 0.65 см (болжол менен 18 x 13 x 6 мм)
- Салмагы: 20 г
- Кошумча өзгөчөлүктөр: LED
- Материал: Plastic (for housing, board components are mixed materials)
- Келип чыккан өлкө: Италия
9. Кепилдик жана колдоо
For warranty information and technical support, please refer to the official Came website or contact your authorized Came dealer. Keep your purchase receipt as proof of purchase.
Өндүрүүчү: келди
Webсайт: www.came.com
