Kramer Electronics VP-1608 User Manual

Introduction

The Kramer VP-1608 is a high-performance matrix switcher designed for routing RGBHV video and balanced stereo audio signals. This device allows for simultaneous routing of any or all inputs to any or all outputs, making it suitable for various professional audio-visual applications. It is fully HDTV compatible, ensuring high-quality signal transmission.

Продукт бүттүview

The VP-1608 features a robust design with comprehensive input and output capabilities:

• High-Performance Matrix Switching: Routes RGBHV and balanced audio signals with precision.
• Simultaneous Routing: Capable of routing any or all inputs to any or all outputs concurrently.
• HDTV шайкештиги: Ensures support for high-definition video signals.
• Видео киргизүү: 16 x 3 RGB video (0.7Vpp/75Ω) on BNC connectors; 16 x 2 H&V (TTL level) on BNC connectors.
• Аудио киргизүү каражаттары: 16 balanced stereo audio on detachable terminal blocks.
• Видео чыгуулары: 8 x 3 RGB video (0.7Vpp/75Ω) on BNC connectors; 8 x 2 H&V (TTL level/75Ω) on BNC connectors.
• Аудио чыгуулар: 8 balanced stereo audio on detachable terminal blocks.

Figure 1: Front and Rear Panels of the Kramer VP-1608. The top section shows the front panel with power switch, input/output selection buttons, and status indicators. The bottom section illustrates the rear panel, detailing the extensive BNC connectors for video, detachable terminal blocks for audio, and control ports.

Жайгашуу

1. Таңгактан чыгаруу жана текшерүү

Carefully unpack the VP-1608 and inspect for any signs of damage during transit. Retain the original packaging for future transport or storage.

2. Стеллажды орнотуу (милдеттүү эмес)

The VP-1608 is designed for standard 19-inch rack mounting. Secure the unit using appropriate rack screws, ensuring adequate ventilation around the device.

3. Connecting Video Signals

Connect your RGBHV video sources to the КИРИШТЕР BNC connectors on the rear panel. Each input requires five BNC cables (R, G, B, H, V). Connect your display devices or other video equipment to the ЧЫГЫШТАР BNC connectors.

• Ensure all BNC connections are secure.
• Match the R, G, B, H, V signals from source to input.

4. Connecting Audio Signals

Connect your balanced stereo audio sources to the detachable terminal blocks labeled АУДИО КИРИШТЕРИ. Similarly, connect your audio receivers or ampкөтөргүчтөр АУДИО ЧЫГЫШТАР терминалдык блоктор.

• Observe correct polarity for balanced audio connections.
• Ensure terminal blocks are securely seated after wiring.

5. Connecting Control (Optional)

For external control, connect a control system via the RS-232 or RS-485 ports on the rear panel. Refer to the detailed control protocol documentation for specific commands and baud rates.

6. Power Connection

Connect the supplied power cord to the AC inlet on the rear panel and then to a grounded electrical outlet. Ensure the power switch on the front panel is in the OFF position before connecting power.

Иштөө нускамалары

1. Күйгүзүү / Өчүрүү

басыңыз КҮЧ switch on the front panel to turn the unit ON or OFF. The power indicator will illuminate when the unit is on.

2. Basic Switching Operation

The VP-1608 uses a matrix switching method where you select an output first, then an input.

1. Чыгарууну тандаңыз: Бирин басыңыз OUTPUT buttons (1-8) to select the desired output channel. The corresponding output LED will light up.
2. Киргизүүнү тандоо: Бирин басыңыз INPUT buttons (1-16) to select the desired input source for the chosen output. The corresponding input LED will light up.
3. Execute Switch: басыңыз АЛ button to execute the switch. The selected input will now be routed to the selected output.

3. Advanced Switching Functions

• ALL баскычы: Басуу БААРЫ followed by an input button will route that input to all outputs simultaneously.
• OFF баскычы: Басуу ӨЧҮРҮҮ followed by an output button will disconnect the input from that specific output.
• VIDEO/AUDIO/AFV Buttons: These buttons allow you to select whether to switch video only, audio only, or audio-follow-video (AFV).
• STO (Store) / RCL (Recall) Buttons: Use these buttons to store and recall predefined switching configurations. Refer to the full manual for detailed programming instructions.
• LOCK баскычы: Engages or disengages the front panel lock to prevent accidental changes.

Техникалык тейлөө

1. Тазалоо

Түзмөктү тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Эгерде өжөр тактар ​​болсо, бир аз сүртүңүз.amp cloth with a mild, non-abrasive cleaner can be used. Ensure the unit is powered off and disconnected from the power source before cleaning. Do not use liquid or aerosol cleaners directly on the unit.

2. Вентиляция

Ensure that the ventilation openings on the unit are not blocked. Proper airflow is essential to prevent overheating and ensure long-term reliability.

3. Firmware Updates (If Applicable)

Kramer Electronics компаниясын мезгил-мезгили менен текшерип туруңуз website for any available firmware updates for the VP-1608. Follow the instructions provided with the update package carefully.

Проблемаларды чечүү

Техникалык шарттар

Расмий продукт Videos

Учурда бул модель үчүн сатуучунун расмий видеолору жок.

Кепилдик жана колдоо

For detailed warranty information and technical support, please refer to the official Kramer Electronics webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Кепилдик дооматтар үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.

Kramer Electronics Webсайт: www.kramerav.com