Littelfuse JTD-15-ID сактандыргычынын колдонуу боюнча колдонмосу
Comprehensive guide for the installation, operation, and maintenance of the Littelfuse JTD-15-ID fuse.
1. Продукт бүтүп калдыview
The Littelfuse JTD-15-ID is a 15 Amp, 300 VDC, 600 VAC, current-limiting, dual-element time-delay fuse designed for use in all general-purpose circuits. It features a trip indication mechanism for easy identification of a blown fuse.
This fuse provides superior protection for motors, transformers, solenoids, and other inductive loads, as well as for general-purpose circuits. Its time-delay characteristic allows for temporary overcurrents without nuisance tripping, while its current-limiting capability minimizes damage from high fault currents.
Сүрөт 1: Алдыңкы view of the Littelfuse JTD-15-ID fuse. The fuse is cylindrical with metal caps on both ends and a green and white label in the center. The label clearly shows "Littelfuse", "JTD 15 ID", and "Indicator". A small window on the label reveals the internal element and a "Good" or "Replace" indicator.
2. Коопсуздук маалыматы
ЭСКЕРТҮҮ: Electrical shock hazard. Always disconnect power before installing or removing fuses. Only qualified personnel should perform electrical work.
- Ensure the fuse rating (voltage and current) matches the circuit requirements.
- Do not use damaged fuses.
- Always replace a blown fuse with a fuse of the same type and rating.
- Электр системалары менен иштөөдө тиешелүү жеке коргонуу шаймандарын (ЖКК) кийиңиз.
3. Орнотуу
The JTD-15-ID fuse is designed for installation into compatible fuse holders or blocks. Ensure the fuse holder is rated for the fuse's voltage жана ток.
- Схеманы өчүрүү: Before beginning installation, ensure that the electrical circuit is completely de-energized at the main power source. Verify with a voltage сыноочу.
- Identify Fuse Holder: Locate the appropriate fuse holder or fuse block in your electrical panel or equipment.
- Сактагычты киргизүү: Carefully insert the JTD-15-ID fuse into the designated fuse holder. Ensure it is seated firmly and correctly.
- Байланышты текшерүү: Confirm that the fuse makes proper electrical contact within the holder.
- Re-energize Circuit: Once the fuse is securely installed, you may re-energize the circuit.
2-сүрөт: Бурчтуу view of the Littelfuse JTD-15-ID fuse. This perspective highlights the "Good" status indicator visible through a small circular window on the green label, confirming the fuse is operational. The "JTD 15 ID" model number is also clearly visible.
4. Operation and Trip Indication
The Littelfuse JTD-15-ID is a passive component designed to protect electrical circuits from overcurrents. It operates by melting an internal element when current exceeds its rated capacity for a specified duration, thereby opening the circuit and preventing damage to equipment.
Сапардын көрсөткүчү: This fuse features a visual trip indicator. When the fuse blows, a small pin or flag will typically pop out or change color in the indicator window, signaling that the fuse has operated and needs replacement. Refer to the fuse label for the specific indicator appearance (e.g., "Good" vs. "Replace" text, or a visible pin).
3-сүрөт: Каптал view of the Littelfuse JTD-15-ID fuse. This image emphasizes the "Indicator" text on the green label, pointing to the mechanism that visually signals when the fuse has tripped. The cylindrical shape and metal end caps are also clearly visible.
5. Техникалык тейлөө
Fuses are generally maintenance-free components. However, periodic inspection of the fuse and its holder is recommended as part of routine electrical system checks.
- Визуалдык текшерүү: Regularly check the fuse for any signs of physical damage, such as cracks, discoloration, or corrosion.
- Trip Indicator Check: Observe the trip indicator. If it shows a "tripped" state (e.g., "Replace" visible, or pin extended), the fuse has operated and requires replacement.
- Тазалоо: Ensure the fuse and its holder are free from dust, dirt, or debris that could impede proper contact or heat dissipation.
6. Кыйынчылыктарды
The primary "troubleshooting" for a fuse involves identifying if it has blown and replacing it correctly.
| Симптом | Мүмкүн себеп | Акция |
|---|---|---|
| Circuit is dead; no power to equipment. | Күйгүзүүчү. |
|
| New fuse blows immediately after replacement. | Persistent overcurrent, short circuit, or incorrect fuse rating. |
|
7. Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Модель номери | JTD-15-ID |
| Бренд | Littelfuse |
| Учурдагы рейтинг | 15 Amps |
| Тtage Rating (AC) | 600 VAC |
| Тtage Rating (DC) | 300 VDC |
| Үзгүлтүксүз рейтинг | Учурдагы чектөө |
| Дизайн түрү | Dual Element, Time Delay |
| Көрсөтмө | Trip Indication (Visual) |
| Өлчөмдөрү (L x W x Y) | 2.28 x 0.84 x 2.28 дюйм |
| Салмагы | 1.41 унция |
8. Кепилдик маалыматы
Specific warranty details for the Littelfuse JTD-15-ID fuse are typically provided by the point of purchase or directly by Littelfuse. As a consumable safety device, fuses generally do not carry a long-term warranty against normal operation (i.e., blowing when intended). Warranty typically covers manufacturing defects only.
For detailed warranty terms and conditions, please refer to the official Littelfuse webсайтка же кардарларды тейлөөгө кайрылыңыз.
9. Кардарларды колдоо кызматы
For technical assistance, product inquiries, or support regarding Littelfuse products, please visit the official Littelfuse webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз.
Note: This manual provides general information. Always consult local electrical codes and regulations for specific installation requirements.
