Introduction
This manual provides comprehensive instructions for the installation, use, and maintenance of the Emtek 91033 3.5" x 3.5" Plain Bearing 5/8" Radius Corners Mortise Hinge. Please read these instructions carefully before proceeding with installation to ensure proper function and longevity of your product. Retain this manual for future reference.
Продукт бүттүview
The Emtek 91033 hinge is designed for residential and light commercial door applications. It features a plain bearing mechanism for smooth operation and 5/8" radius corners for compatibility with standard door preparations. This product is sold as a pair.
Сүрөт 1: Emtek 91033 3.5" x 3.5" Plain Bearing Mortise Hinge. This image displays the Emtek 91033 mortise hinge. It features two leaves connected by a central pin, with rounded corners and screw holes on each leaf. The finish appears to be a dark, brushed metal, identified as Tumbled White Bronze.
Негизги өзгөчөлүктөрү:
- Өлчөмдөрү: 3.5 дюйм (узундугу) x 3.5 дюйм (туурасы)
- Подшипник түрү: Plain Bearing for reliable function
- Corner Type: 5/8 inch Radius Corners
- Материал: Durable Stainless Steel construction
- Бүтүрүү: Unfinished (Color: Tumbled White Bronze)
- Монтаждоо: Door Mount
- Саны: Sold as a pair (2 pieces)
Орнотуу нускамалары
Proper installation is crucial for the optimal performance and longevity of your hinges. If you are unsure about any step, it is recommended to consult a professional.
Керектүү куралдар:
- Карандаш
- Өлчөө лентасы
- Чисел
- Hammer
- Тийиштүү бургулоо биттери менен бургула
- Screwdriver (manual or power)
- Коопсуздук көз айнек
Орнотуу кадамдары:
- Эшикти жана рамканы даярдоо: Ensure that the door and door frame are properly prepared with mortises (recesses) that match the dimensions of the hinge leaves (3.5" x 3.5" with 5/8" radius corners). The depth of the mortise should allow the hinge leaf to sit flush with the surface.
- Бурама тешиктерин белгилөө: Place one hinge leaf into the prepared mortise on the door edge. Use a pencil to mark the locations for the screw holes. Repeat this for all hinges on the door.
- Бургулоочу тешиктер: Using an appropriate drill bit (slightly smaller than the screw diameter), drill pilot holes at the marked locations. This prevents wood splitting.
- Илмектерди эшикке бекитүү: Secure the hinge leaves to the door using the provided screws. Ensure the hinges are flush and firmly attached.
- Эшиктин орду: Carefully position the door within the door frame, aligning the hinges on the door with the mortises on the frame. Use shims if necessary to maintain proper spacing.
- Mark Frame Screw Holes: Once aligned, mark the screw holes on the door frame through the hinge leaves.
- Drill Pilot Holes (Frame): Drill pilot holes into the door frame at the marked locations.
- Илмектерди рамкага бекитүү: Secure the hinges to the door frame using the remaining screws.
- Сыноо операциясы: Open and close the door several times to check for smooth operation and proper alignment. Adjust screws if necessary to achieve optimal performance.
Маанилүү: Always use appropriate safety gear, such as safety glasses, during installation.
Функционалдык
The Emtek 91033 plain bearing hinge is designed for smooth and consistent door movement. Once properly installed, the hinge allows the door to pivot freely between its open and closed positions. No specific operational steps are required beyond normal door usage.
- Жылмакай кыймыл: The plain bearing design ensures a consistent pivot action.
- Узактыгы: Constructed from stainless steel for long-lasting performance.
Техникалык тейлөө
Regular maintenance can extend the life and ensure the smooth operation of your Emtek hinges.
- Тазалоо: Илмектерди мезгил-мезгили менен жумшак, d менен тазалап туруңузamp кездеме. Абразивдүү тазалоочу каражаттардан же катуу химиялык заттардан алыс болуңуз, анткени алар капталга зыян келтириши мүмкүн.
- Майлоо: For optimal performance, apply a small amount of silicone-based lubricant to the hinge pin and knuckles annually, or if squeaking occurs. Wipe off any excess lubricant.
- Катуу бурамалар: Periodically check all mounting screws for tightness. Loose screws can lead to door sagging or improper operation. Tighten gently to avoid stripping the screw heads or wood.
- Текшерүү: Inspect hinges for any signs of wear, damage, or corrosion. Replace hinges if significant damage is observed.
Проблемаларды чечүү
Most issues with door hinges can be resolved with simple adjustments.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Эшиктин чырылдаганы | Майлоонун жетишсиздиги | Apply silicone-based lubricant to hinge pins. |
| Door sags or rubs | Бош монтаждоо бурамалар | Tighten all hinge mounting screws. |
| Эшик туура жабылбайт | Орнотуу учурунда туура эмес тууралоо | Check hinge alignment and adjust screws. Ensure mortises are correctly cut. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | 91033 |
| Бренд | Эмтек |
| Өлчөмдөрү (L x W) | 3.5" x 3.5" |
| Бурч түрү | 5/8" радиусу |
| Подшипник түрү | Plain Bearing |
| Материал | Дат баспаган болот |
| Бүтүрүү | Unfinished (Tumbled White Bronze color) |
| Монтаж түрү | Door Mount |
| Саны | Pair (2 pieces) |
| Бөлүмдүн номери | 91033TWB |
Кепилдик жана колдоо
Кепилдик маалыматы:
Emtek products are manufactured to high-quality standards. For specific warranty details regarding the Emtek 91033 hinge, please refer to the official Emtek website or contact Emtek customer service directly. Warranty terms typically cover manufacturing defects.
Кардарларды колдоо:
If you encounter any issues or have questions not covered in this manual, please contact Emtek customer support. You can usually find contact information on the official Emtek webсайт (www.emtek.com) or through your authorized Emtek dealer.
