Introduction
Welcome to the Gmatrix A-TV10 multi-functional waterproof remote control. This remote is specifically designed for simplicity and ease of use, featuring only six large, essential buttons. Its user-friendly design aims to provide a comfortable and straightforward television control experience, making it an essential household item.
Продукт бүттүview
The Gmatrix A-TV10 remote control is engineered for simplicity and durability. Its robust design includes a waterproof casing and large, clearly labeled buttons for effortless operation.
Сүрөт 1: Алдыңкы view of the Gmatrix A-TV10 remote control, showcasing its large, clearly labeled buttons and compact design.
2-сүрөт: Бурчтуу view highlighting the ergonomic shape and button layout of the remote control.
3-сүрөт: Каптал view illustrating the battery compartment and its secure, waterproof design.
Жайгашуу
1. Батареяны орнотуу
The Gmatrix A-TV10 remote requires two AAA batteries (not included).
- To open the battery compartment, pull the lanyard while simultaneously pushing the small button located on the back of the remote.
- Батарейканын капкагын кылдаттык менен алып салыңыз.
- Туура полярдуулукту (+/-) камсыз кылуу менен эки AAA батарейкасын салыңыз.
- Replace the battery cover by aligning it and pushing firmly until it clicks into place, ensuring a secure, waterproof seal.
Эскертүү: If the remote control does not function after battery installation, ensure the batteries are inserted correctly. If the LED indicator light blinks continuously, replace with new batteries.
2. Пультту программалоо
The Gmatrix A-TV10 remote can be programmed using an automatic search method or a learning function. It is compatible with standard televisions or televisions with an inserted direct line cable. It is туура келбейт with cable boxes or satellite receivers.
Method A: Automatic Search (Recommended)
- Point the A-TV10 remote directly at your television.
- басып, кармап туруңуз SET button for approximately 7 seconds. The indicator light on the remote will illuminate. Release the button.
- The remote will begin searching for your TV's code. Observe your television screen.
- As soon as your television turns off, immediately press the SET button again to save the code.
Маанилүү: It is crucial to press the SET button immediately after the TV turns off. If you delay, the remote may continue searching, and the correct code might be missed.
Method B: Learning Function (for specific buttons)
This function allows the A-TV10 to learn commands from your original TV remote for specific buttons.
- басып, кармап туруңуз SET button for approximately 3 seconds. While still holding SET, басып, кармап туруңуз VOL+ button for approximately 5 seconds. The indicator light will turn on. Release both buttons. The remote is now in learning mode.
- Place your original TV remote control and the Gmatrix A-TV10 remote control facing each other, with their infrared emitters aligned, at a distance of 3-5 cm.
- On your original remote, press the button you wish to teach (e.g., Power). The Gmatrix A-TV10's indicator light will flash three times.
- Immediately press the corresponding button on the Gmatrix A-TV10 remote (e.g., Power). The indicator light will flash three times again, confirming the code has been learned.
- Repeat steps 3 and 4 for any other buttons you wish to program using the learning function.
- To exit learning mode and save the learned codes, press the SET баскычы.
Эскертүү: If the indicator light flashes three times and then you hold a key for 10 seconds, the learning state will be exited without saving.
Иштөө нускамалары
Once programmed, the Gmatrix A-TV10 remote provides simple control over your television with its six large buttons:
- Кубат баскычы (Кызыл): Turns your television on or off.
- VOL+ / VOL- баскычтары: Үндү жогору же ылдый тууралаңыз.
- CH+ / CH- Buttons: Change channels up or down.
- Үнсүз баскычы: Телевизордун үнүн өчүрөт же ачат.
- AV Button: Switches between video input sources (e.g., TV, HDMI, AV).
- SET Button (Red): Used for programming and learning functions. Not for daily TV operation.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Remote does not work after battery installation. | Incorrect battery polarity; dead batteries. | Ensure batteries are inserted correctly (+/-). Replace with new AAA batteries. |
| LED indicator light blinks continuously. | Батареянын кубаттуулугу төмөн. | Жаңы AAA батарейкалары менен алмаштырыңыз. |
| Remote does not control the TV after programming. | Incorrect code saved; programming error. | Repeat the programming steps carefully, especially the automatic search method. Ensure you press SET immediately when the TV turns off. |
| Remote does not work with cable box or satellite receiver. | Product limitation. | The Gmatrix A-TV10 is designed for direct TV control and is not compatible with external set-top boxes. |
Техникалык шарттар
- Модель номери: A-TV10
- Продукциянын өлчөмдөрү: 6 x 2 x 1 дюйм
- Элемент Салмагы: 3.2 унция
- Батареялар талап кылынат: 2 AAA батарейка (киргизилген эмес)
- Байланыш технологиясы: Инфракызыл
- Шайкеш түзмөктөр: Телевидение
- Колдоого алынган түзмөктөрдүн максималдуу саны: 2 (via learning function for specific buttons)
- Өзгөчө өзгөчөлүгү: Universal, Waterproof
Кепилдик жана колдоо
For information regarding warranty coverage or technical support for your Gmatrix A-TV10 Universal Waterproof Remote Control, please refer to the product packaging or contact Gmatrix customer service directly. Contact details can typically be found on the manufacturer's official website or within the product's sales documentation.
