GAME SandPRO 50D Series Pool Sand Filter Unit Instruction Manual

Introduction

This manual provides essential information for the safe and efficient operation and maintenance of your GAME SandPRO 50D Series Pool Sand Filter Unit. This high-performance filtration system is designed for above-ground pools, offering energy-efficient water circulation and superior filtration. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your unit.

Image: The GAME SandPRO 50D Series Pool Sand Filter Unit, showcasing its compact design and main components including the sand tank, pump, and multi-port valve.

Коопсуздук маалыматы

ЭСКЕРТҮҮ: Бул продукт Калифорния штатында рак жана тубаса кемтик же башка репродуктивдүү зыян алып келүүчү химиялык заттарды камтыйт. Көбүрөөк маалымат алуу үчүн, өтүңүз www.P65Warnings.ca.gov.

Always follow basic safety precautions when installing and operating this electrical equipment. Refer to the official Safety Information PDF document for comprehensive safety guidelines.

• Ensure the unit is installed on a solid, level surface.
• Do not operate the pump if the ground is wet or if you are standing in water.
• Кандайдыр бир тейлөөнү же тейлөөнү аткаруудан мурун ар дайым электр кубатын ажыратыңыз.
• Keep children and unauthorized persons away from the unit during operation.
• Ensure all electrical connections are properly grounded and protected by a Ground-Fault Circuit Interrupter (GFCI).

Орнотуу жана орнотуу

Proper setup is crucial for the optimal performance of your SandPRO 50D filter unit. Follow these steps carefully:

1. Жайгашкан жери: Position the filter unit on a stable, level surface near your above-ground pool. Ensure adequate drainage and protection from direct weather exposure if possible.
2. Кум менен толтуруу: The SandPRO 50D requires 50 pounds of medium-grade pool filtering sand, also known as #20 silica sand. Do not use regular sand or other filtering media unless specified by the manufacturer. Carefully pour the sand into the filter tank, ensuring the standpipe is centered.

Image: A person adding 50 pounds of #20 silica sand into the filter tank, illustrating the sand filling process.
3. Көп порттуу клапанды орнотуу: Securely attach the multi-port valve to the top of the sand tank. Ensure the O-ring is properly seated and the clamp is tightened evenly.
4. Шланг байланыштары: Connect the hoses from your pool to the appropriate ports on the multi-port valve and pump. The unit includes adapters for Intex pools (32 mm, 40 mm, 1-1/4-in, & 1-1/2-in hose fittings). Ensure all hose clamps are tightened securely to prevent leaks, but avoid over-tightening which can damage fittings.


Image: The SandPRO 50D filter unit connected to an above-ground pool, demonstrating the typical setup with hoses.

5. Электр байланышы: Connect the pump to a properly grounded electrical outlet protected by a GFCI.

For detailed diagrams and step-by-step instructions, please refer to the comprehensive User Guide (PDF) provided by the manufacturer.

Иштөө нускамалары

The SandPRO 50D features an easy-to-operate 4-position rotary valve for various functions:

Сүрөт: деталдуу view of the multi-port valve with its 4-way handle, the integrated pressure gauge, and the transparent lid of the strainer basket.

• Чыпка: This is the standard operating mode for daily filtration. Water is pumped through the sand bed, trapping debris, and returned to the pool.
• АРТКА ЖУУ: Used to clean the sand filter. Water flow is reversed, flushing trapped debris out through the waste port. Perform backwash when the pressure gauge reading increases by 5-10 PSI above its clean operating pressure.
• ЖУУ: After backwashing, this mode settles the sand bed and flushes any remaining dirty water to waste before returning to FILTER mode.
• КЫШТАЙ: Prepares the filter for off-season storage. Consult the user guide for specific winterization procedures.

The integrated pressure gauge allows you to monitor the filter's performance. A rising pressure indicates that the filter media is becoming clogged and requires backwashing.

Техникалык тейлөө

Regular maintenance ensures the longevity and efficiency of your SandPRO 50D filter unit:

• Сүзүүчү себет: Periodically check and clean the large-capacity easy-to-clean hair & debris strainer basket. The see-through lid allows for easy inspection. Turn off the pump before opening the basket.
• Backwashing & Rinsing: Perform backwashing and rinsing as needed, typically when the pressure gauge indicates a 5-10 PSI increase from its clean operating pressure.
• Кумду алмаштыруу: The #20 silica sand typically needs replacement every 3-5 years, depending on usage and water quality. Refer to the user guide for instructions on replacing the sand.

Проблемаларды чечүү

If you encounter issues with your SandPRO 50D, consider the following common troubleshooting tips:

For more complex issues or if troubleshooting steps do not resolve the problem, refer to the detailed troubleshooting section in the official User Guide (PDF).

Техникалык шарттар

• Модел: 4710-BB
• Pump Horsepower: 0.5 HP
• Maximum Pool Capacity: 10,000 галлонго чейин
• Агым ылдамдыгы: 40 GPM (Мүнөтүнө Галлон)
• Sand Requirement: 50 lbs of #20 Silica Sand (not included)
• Продукциянын өлчөмдөрү: 17.64 x 17.77 x 24.82 дюйм
• Элемент Салмагы: 21 фунт
• Өндүрүүчү: ОЮН

Кепилдик жана колдоо

For warranty information, technical support, or to inquire about replacement parts, please contact GAME customer service. Replacement parts for SandPRO filters are exclusively available through GAME.

You can also refer to the official User Guide (PDF) for additional information: Колдонуучунун колдонмосу (PDF)