Introduction
This manual provides essential information for the safe and efficient use of your Philips Lighting ER55LD3WR LED Exit Sign. Please read these instructions carefully before installation and operation, and retain them for future reference. This product is designed for commercial lighting applications, specifically as a lighted exit sign.
Коопсуздук маалыматы
- Always disconnect power before installing or servicing the unit.
- Орнотуу улуттук жана жергиликтүү электр эрежелерине ылайык квалификациялуу электрик тарабынан жүргүзүлүшү керек.
- Бул продуктуну максаттуу колдонуудан башка максаттарда колдонбоңуз.
- Бардык байланыштар коопсуз жана туура изоляцияланганын текшериңиз.
- Суу жана ашыкча нымдуулуктан алыс болуңуз.
Пакеттин мазмуну
Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:
- Philips Lighting ER55LD3WR LED Exit Sign unit
- Монтаждоочу жабдыктар (буроолор, анкерлер)
- Көрсөтмө (бул документ)
Орнотуу жана орнотуу
The Philips Lighting ER55LD3WR LED Exit Sign is designed for wall mounting. Ensure the mounting surface is suitable to support the weight of the unit.
- Орнотуу аймагын даярдоо: Disconnect power to the circuit where the exit sign will be installed.
- Монтаждоо:
- Identify the desired wall mounting location.
- Use the provided mounting hardware to securely attach the exit sign to the wall. Ensure the unit is level.
- Зымдар:
- Connect the building's 120V AC power supply to the corresponding wires on the exit sign. Refer to the wiring diagram inside the unit's housing for specific connections.
- Туура жерге туташтырууну камсыз кылуу.
- Connect the internal battery (if not pre-connected). This is crucial for emergency operation.
- Жыйынтыктоочу жыйын: Secure any covers or diffusers.
Сүрөт 1: Алдыңкы view of the Philips Lighting ER55LD3WR LED Exit Sign. This image shows the white housing with the red "EXIT" lettering illuminated, indicating its primary function as an emergency egress indicator.
Иштөө нускамалары
Once installed and power is restored, the Philips Lighting ER55LD3WR LED Exit Sign will operate automatically.
- Кадимки операция: When AC power is present, the "EXIT" sign will be illuminated by the internal LEDs. The green indicator light on the unit will be ON, signifying operating status.
- Шашылыш операция: In the event of an AC power failure, the unit will automatically switch to battery backup, illuminating the "EXIT" sign for a specified duration (typically 90 minutes).
- Сыноо баскычы: A test button is provided on the unit to verify emergency operation. Press and hold the "Push to Test" button to simulate an AC power failure. The sign should remain illuminated, and the green indicator light will blink, indicating testing. Release the button to return to normal operation.
Сүрөт 2: Жакын пландан view of the test button and indicator lights on the Philips Lighting ER55LD3WR LED Exit Sign. The green indicator shows operating status (ON for ready, Blinking for testing). The red indicator shows service alerts such as battery, charger board, transformer, or LED strip faults.
Техникалык тейлөө
Regular maintenance ensures the reliability and longevity of your LED Exit Sign.
- Айлык тест: Press the "Push to Test" button for at least 30 seconds to ensure the battery backup system is functioning. The sign should remain illuminated.
- Annual Test: Disconnect AC power to the unit for 90 minutes to verify the battery can sustain emergency illumination for the required duration.
- Тазалоо: Агрегаттын сыртын жумшак, гamp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Батареяны алмаштыруу: The internal battery has a limited lifespan. If the unit fails to hold a charge or the red "Battery fault" indicator illuminates, the battery may need replacement. Contact qualified service personnel for battery replacement.
Проблемаларды чечүү
Жалпы маселелер жана аларды чечүү үчүн төмөнкү таблицага кайрылыңыз.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Sign does not illuminate (AC power present) | No AC power; faulty wiring; LED strip fault | Check circuit breaker; verify wiring connections; contact service for LED replacement. |
| Sign does not illuminate during power outage (шашылыш режим) | Battery not connected; discharged battery; faulty battery; charger board fault | Ensure battery is connected; allow 24 hours for initial charge; replace battery; contact service for charger board repair. |
| Red Service Alert indicator is ON | Indicates battery, charger board, transformer, or LED strip fault (refer to unit label) | Identify specific fault from unit label; perform monthly/annual tests; contact qualified service personnel. |
| Green Operating Status indicator is OFF (AC power present) | No AC power; internal fault | Check AC power supply; contact qualified service personnel. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | ER55LD3WR |
| Бренд | Philips Lighting |
| Жарык булагы түрү | LED |
| Тtage | 120 вольт |
| Power Source | Электр зымдары |
| Монтаж түрү | Дубалга орнотуу |
| Материал | Металл |
| Түс | Ак |
| Продукциянын өлчөмдөрү | 4.25 x 6.25 x 4.8 дюйм |
| Элемент Салмагы | 4.98 фунт |
| UPC | 781370410117 |
Кепилдик жана колдоо
For warranty information or technical support, please contact Philips Lighting customer service. Keep your purchase receipt as proof of purchase.
Өндүрүүчү: Philips Lighting
