1. Бүттүview
The UHPPOTE 125KHz RFID Standalone Door Access Control Keypad is a high-quality, high-security device designed for sensitive and quick response access control. It supports up to 1000 card users and can be fully programmed directly from the keypad, eliminating the need for a computer connection. Its low-power circuit ensures a longer service life, making it suitable for various applications including factories, houses, residential quarters, offices, and mechanical/electrical control equipment.
2. Негизги өзгөчөлүктөрү
- High Quality and High Security: Ensures sensitive and quick response for reliable access control.
- Full Keypad Programming: Supports adding/deleting cards, setting passwords, and other functions directly from the keypad.
- Doorbell Button Support: Includes a doorbell button for external doorbell connection.
- Жогорку өндүрүмдүү MCU: Utilizes an ST 32-bit MCU for stable performance and a low-power circuit for extended service life.
- Өз алдынча иштөө: Functions independently without requiring a computer connection.
- Ар тараптуу колдонмо: Ideal for factories, homes, residential areas, offices, and various control equipment.
3. Техникалык шарттар
| Спецификация | Деталь |
|---|---|
| Бренд | Uhpopote |
| Модель номери | UT0212-T11-Card |
| Power Source | Электр зымдары |
| Шайкеш түзмөктөр | Personal Computer (for advanced setup, though standalone operation is possible) |
| Элементтин өлчөмдөрү (L x W x Y) | 4.29 x 2.76 x 0.79 дюйм |
| Байланыш технологиясы | Зымдуу |
| Орнотуу түрү | Screw-In |
| Эскертүү түрү | Кирүү |
| Элемент Салмагы | 181 грамм (6.4 унция) |
| Тtage | 12 вольт |
| Башкаруу ыкмасы | тийүү |
| Maximum Range (RFID) | 0.39 дюйм |
| Сунушталган Колдонуулар | Home Security, Office Security |
| Sensor Technology | RFID |
4. Орнотуу жана орнотуу
4.1. Пакеттин мазмуну
- 1 x UHPPOTE 125KHz RFID Access Control Keypad
- 10 x ачкыч ачкычтар
- 1 x зымдары
- 1 x Screw Package (mounting screws and anchors)
- 1 x User Manual
4.2. Физикалык орнотуу
The keypad is designed for screw-in installation. Ensure you have the necessary tools (drill, screwdriver) before beginning. The device is intended for indoor use.
- Drill four holes on the wall for the self-tapping screws and one hole for the cable.
- Insert the plastic anchors into the four drilled holes.
- Fix the back cover firmly on the wall using the four self-tapping screws.
- Thread the cable through the cable hole and attach the keypad to the back cover.
- Secure the keypad to the back cover using the securing screw at the bottom.
Сүрөт: алдыңкы view of the UHPPOTE 125KHz RFID Access Control Keypad.
Сүрөт: Артка view of the keypad showing the wiring harness connection point.
Image: The access control keypad mounted on a wall next to a door, demonstrating typical installation.
5. Электр схемасы
Proper wiring is crucial for the correct function of the access control system. Refer to the diagrams below for common and special power supply connections, and the video for a visual guide.
Video: Detailed wiring instructions for the HBK-A02 access control keypad. This video demonstrates how to connect the keypad to a power supply, electric lock, and exit button.
5.1. Common Power Supply Diagram
Image: Wiring diagram for connecting the access control keypad with a common power supply, exit button, and both fail-secure and fail-safe locks.
5.2. Special Power Supply Diagram
Image: Wiring diagram for connecting the access control keypad with a special power supply, exit button, and both fail-secure and fail-safe locks.
6. Иштөө нускамалары
The keypad allows for full programming directly from the device. Follow these steps to manage users and settings. For a visual demonstration, please refer to the operation video below.
Video: Operational guide for the HBK-A02 access control keypad, demonstrating various programming and usage functions.
6.1. Changing the Admin Password
- Басыңыз #, then input the default admin password (e.g., 123456), андан кийин басыңыз #.
- Басыңыз 0.
- Input your new admin password (4-8 digits), then press #.
- Input the new admin password again to confirm, then press #.
- The keypad will emit a confirmation tone.
6.2. Adding Card Users
- Басыңыз #, then input the admin password, then press #.
- Басыңыз 1, анда 0.
- Place the card you wish to add on the keypad. The keypad will beep to confirm.
- To add more cards, place each additional card on the keypad.
- After adding all desired cards, press # чыгуу.
6.3. Adding a Card User with ID Number
- Басыңыз #, then input the admin password, then press #.
- Басыңыз 1, анда 1.
- Input a 4-digit user ID number (from 0000 to 9999), then press #.
- Place the card on the keypad. The keypad will beep to confirm.
- Басыңыз # чыгуу.
6.4. Adding or Changing PIN Users
- Басыңыз #, then input the admin password, then press #.
- Басыңыз 1, анда 2.
- Input a 4-digit user ID number (from 0000 to 9999), then press #.
- Input a new password (4-8 digits), then press #.
- Input the new password again to confirm, then press #.
- The keypad will emit a confirmation tone.
6.5. Setting Admin Add Card
An Admin Add Card can be used to quickly add multiple user cards without entering programming mode each time. Only one Admin Add Card can be set.
- Басыңыз #, then input the admin password, then press #.
- Басыңыз 6, анда 2, анда 1.
- Place the card you want to designate as the Admin Add Card on the keypad. The keypad will beep to confirm.
- Басыңыз # чыгуу.
6.6. Setting Admin Delete Card
An Admin Delete Card can be used to quickly delete multiple user cards without entering programming mode each time. Only one Admin Delete Card can be set.
- Басыңыз #, then input the admin password, then press #.
- Басыңыз 6, анда 2, анда 2.
- Place the card you want to designate as the Admin Delete Card on the keypad. The keypad will beep to confirm.
- Басыңыз # чыгуу.
6.7. Setting or Changing a PIN for an Added Card
This operation must be done outside of programming mode, and the card must already be programmed to this keypad.
- Басыңыз #, анда #.
- Place the added card on the keypad.
- Input the new password (4-8 digits), then press #.
- Input the new password again to confirm, then press #.
- The keypad will emit a confirmation tone.
7. Техникалык тейлөө
- Keep the keypad clean by wiping it with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Бардык зымдардын туташууларынын бекем экенине ынаныңыз. Бош туташууларды мезгил-мезгили менен текшерип туруңуз.
- Protect the device from extreme temperatures and moisture. It is designed for indoor use.
- Regularly test the functionality of the keypad, cards, and connected locks to ensure proper operation.
8. Кыйынчылыктарды
- Баскычтоп жооп бербей жатат: Check power supply connections. Ensure the device is receiving 12V.
- Cards not recognized: Ensure cards are properly enrolled. Re-enroll cards if necessary. Check the maximum range of the RFID reader (0.39 inches).
- Lock not activating: Verify wiring to the electric lock according to the diagrams. Check the lock's power supply and functionality independently.
- Cannot enter programming mode: Ensure the correct admin password is being used.
- Арткы жарык маселелери: Check backlight settings (ON, OFF, Auto) as described in the operating video.
9. Кепилдик жана колдоо
UHPPOTE products are designed for reliability and performance. For specific warranty details, please refer to the documentation included with your purchase or contact UHPPOTE customer support. If you encounter any issues not covered in this manual or require further assistance, please reach out to our support team.
UHPPOTE Customer Support: Please visit the official UHPPOTE webбайланыш маалыматы жана колдоо булактары үчүн сайт.
