Amazon Basics 8-Sheet Cross-Cut Paper and Credit Card Shredder

Introduction

Сатып алганыңыз үчүн рахматasing the Amazon Basics 8-Sheet Cross-Cut Paper and Credit Card Shredder. This device is designed to securely dispose of sensitive documents and credit cards, turning them into small, unreadable pieces. For optimal performance and safety, please read this manual thoroughly before operation and retain it for future reference.

Фронт view of the Amazon Basics 8-Sheet Cross-Cut Shredder, showcasing its compact design and clear viewтерезе.

Коопсуздук маалыматы

ЭСКЕРТҮҮ: ӨРТ КОРКУНУЧУ

• майдалагычтын ичине же анын айланасына эч кандай аэрозолдук каражаттарды чачпаңыз же сактабаңыз.
• Do not shred items like metallic credit cards, as this can damage the shredder and pose a fire risk.
• Кагаз киргизүү тешигинен кенен кийимдерди, зер буюмдарды, чачты жана колдорду алыс кармаңыз.
• Балдарды жана үй жаныбарларын майдалагычтан алыс кармаңыз.
• Колдонулбай турганда же тазалоонун алдында майдалагычты ар дайым розеткадан сууруп алыңыз.

Жайгашуу

1. Unpack the shredder and ensure all components are present: shredder head and waste bin.
2. Place the waste bin on a flat, stable surface.
3. Carefully place the shredder head onto the waste bin, ensuring it is properly aligned and securely seated. The misaligned indicator light will turn off when correctly positioned.
4. Электр шнурын стандарттуу электр розеткасына сайыңыз.

The shredder is designed to fit conveniently in a home or office environment.

Иштөө нускамалары

The shredder features a 4-mode control switch and LED status indicators for ease of use.

Close-up of the shredder's control panel, showing the mode switch and indicator lights.

Control Switch Modes:

• ӨЧҮК (O): Майдалагычты өчүрөт.
• REVERSE (<<): Reverses the shredding mechanism to clear paper jams.
• AUTO/ON (I): The shredder automatically starts when paper is inserted and stops when shredding is complete. This is the recommended mode for normal operation.
• FORWARD (>>): Manually engages the shredding mechanism to push paper through.

Shredding Documents:

1. Башкаруу которгучун төмөнкүгө коюңуз AUTO/ON (I). The 'Power On' indicator light will illuminate.
2. Insert up to 8 sheets of 20-pound bond paper into the 8.7-inch-wide paper entry slot. The shredder can also handle staples and small paper clips.
3. For credit cards, insert one card at a time into the dedicated slot.
4. The shredder will automatically begin shredding. Once complete, it will stop.

A user demonstrating the insertion of paper into the shredder's entry slot.

Иштөө убактысы:

The shredder has a maximum run time of 3 minutes on, followed by a 30-minute cool-down period. Thermal protection and auto shut-off features are included to prevent overheating. If the 'Overheat' indicator light illuminates, allow the shredder to cool down for 30 minutes before resuming operation.

Техникалык тейлөө

Таштанды кутучасын бошотуу:

The shredder features a clear window on the front of the bin, allowing you to monitor the shredded paper level. When the bin appears full:

1. Башкаруу которгучун төмөнкүгө коюңуз ӨЧҮК (O) and unplug the shredder from the power outlet.
2. Lift the shredder head off the waste bin using the integrated handle.
3. Empty the shredded contents from the 4.1-gallon bin into a trash receptacle.
4. Replace the shredder head securely onto the waste bin.
5. Plug the shredder back into the power outlet.

The shredder's viewing window allows for easy monitoring of the waste bin's fill level.

Проблемаларды чечүү

Refer to the indicator lights on the control panel for common issues:

• Misaligned Light: Indicates the shredder head is not properly seated on the waste bin. Lift and re-seat the shredder head until the light turns off.
• Ашыкча жүк жарык: Indicates too many sheets of paper were inserted. Use the REVERSE (<<) mode to clear the jam, remove some sheets, and re-insert a smaller quantity.
• Overheat Light: Indicates the shredder has exceeded its maximum run time or is too hot. Unplug the shredder and allow it to cool down for 30 minutes.
• Күйгүзүү жарыгы: Бул майдалагычтын күйгүзүлгөнүн жана иштөөгө даяр экенин билдирет.

Кыйынчылыктарды аныктоо үчүн, расмий өкүлгө кайрылыңыз Көйгөйлөрдү чечүү боюнча колдонмо (PDF).

Техникалык шарттар

Кепилдик жана колдоо

For warranty information, please refer to the official Кепилдик (PDF) документ.

Кардарларды тейлөө жана колдоо үчүн төмөнкү дарекке кайрылыңыз: 1-844-303-4344.