Peavey 6505 MH мини-компакт түтүк гитара Ampliifier Head User Manual

Introduction

The Peavey 6505 MH is a mini-compact tube amplifier head designed to deliver the legendary tone of the 6505 series in a portable format. This amplifier features 2x EL84 power tubes and 3x 12AX7/ECC83 preamp tubes, offering versatile sound for various musical styles. It includes modern features such as a Tube Status Indication (T.S.I.) circuit, Mic Simulated Direct Interface (MSDI), USB output, and a speaker defeat switch for flexible use in practice, recording, and live performance.

Коопсуздук маалыматы

• Жогорку Voltage: Бул продукт жогорку көлөмүн камтыйтtage components. Do not attempt to service the unit yourself. Refer all servicing to qualified service personnel.
• Кубат булагы: туташтыруу ampкөрсөтүлгөн электр менен камсыздоого гана көтөргүчtage as indicated on the unit. Ensure the power cord is undamaged.
• Вентиляция: айланасында жетиштүү желдетүүнү камсыз кылуу ampАшыкча ысып кетүүнүн алдын алуу үчүн желдеткичти колдонуңуз.
• Нымдуулук: Do not expose the unit to rain or moisture. Avoid placing objects filled with liquids on the ampөмүрлүү.
• Негиздөө: ар дайым туташтырыңыз amplifier to a grounded power outlet.
• Динамик туташуу: ар дайым туташтырыңыз amplifier to a speaker cabinet of the correct impedance before powering on. Operating without a load or with an incorrect load can damage the ampөмүрлүү.

Пакеттин мазмуну

Таңгактан чыгарганда, төмөнкү буюмдардын бар экенин текшериңиз:

• Peavey 6505 MH MiniHead Ampөмүрлүү
• Footswitch
• Электр кабели
• Колдонуучунун Колдонмосу (бул документ)

Жайгашуу

1. Connecting to a Speaker Cabinet

The 6505 MH features an impedance switch on the rear panel, allowing selection between 8 or 16 ohm cabinets. Ensure the switch matches the impedance of your speaker cabinet. Always connect a speaker cabinet to the "SPEAKER" output before powering on the amplifier. Operating the amplifier without a proper speaker load can cause damage.

Image: Rear panel of the Peavey 6505 MH ampкөтөргүч. Бул view highlights the various input and output jacks, including the speaker output, impedance switch, MSDI, effects loop, and USB port.

2. Power Connection

Connect the supplied power cable to the IEC inlet on the rear panel and then to a grounded electrical outlet. The amplifier supports 115V and 220-230V operation, selectable via a switch next to the power inlet. Ensure the voltage selector is set correctly for your region.

3. Footswitch Connection

Connect the included footswitch to the "FOOTSWITCH" jack on the rear panel. This allows remote control of channel switching, crunch mode, and reverb.

Иштөө нускамалары

Алдыңкы панелдин башкаруу элементтери

Image: Front panel of the Peavey 6505 MH amplifier. This image displays the input jack, channel select switch, pre-gain controls, equalization knobs, post-gain controls, reverb, resonance, presence, and power switches.

• Киргизүү: Standard 1/4" input for your guitar.
• Канал тандоо: Toggles between the Rhythm and Lead channels. Can also be controlled via footswitch.
• Pre-Gain (Rhythm/Lead): Controls the input gain for each channel, affecting distortion and sustain.
• Crunch (Rhythm Channel): A footswitchable feature on the Rhythm channel that adds an additional gain stage for a crunchier tone.
• Equalization (Low, Mid, High): Shared 3-band EQ for both channels to shape the tone.
• Post-Gain (Rhythm/Lead): Controls the output volume for each channel.
• Реверб: Adjusts the amount of built-in digital reverb. Footswitchable.
• Резонанс: Controls the dampкубаттуулуктун фактору amplifier, affecting low-end response.
• Болушу: Controls the dampкубаттуулуктун фактору amplifier, affecting high-end response.
• Күтүү режиминдеги которуу: Places the amplifier in standby mode, keeping the tubes warm without signal amplification. Always use this switch when taking short breaks.
• Кубат которгучу: бурат ampөмүрдү күйгүзүү же өчүрүү.
• T.S.I. (Tube Status Indication): LEDs indicate the health of the power tubes. Green indicates normal operation, while red indicates a tube issue.

Арткы панелдин өзгөчөлүктөрү

Image: Rear panel of the Peavey 6505 MH ampкөтөргүч. Бул view highlights the various input and output jacks, including the speaker output, impedance switch, MSDI, effects loop, and USB port.

• Attenuator Switch (20W, 5W, 1W): Selects the output power level, allowing for lower volume operation while maintaining tube saturation.
• Speaker Defeat Switch: Disables the speaker output, useful for silent practice with headphones or direct recording via MSDI/USB without a speaker cabinet connected.
• MSDI Output (Mic Simulated Direct Interface): XLR output with ground lift switch for direct connection to a mixing console or audio interface. Provides a mic-simulated signal.
• USB чыгышы: Connects to a computer for direct recording.
• Effects Loop (Send/Return): Allows connection of external effects pedals or processors after the preamp section and before the power amp.

Powering On and Off Sequence

1. Ensure a speaker cabinet is connected (unless using speaker defeat).
2. Flip the Power switch to the ON position.
3. Wait approximately 30-60 seconds for the tubes to warm up.
4. Flip the Standby switch to the ON position. The ampliifier азыр колдонууга даяр.
5. To power off, first flip the Standby switch to the OFF position.
6. Wait a few seconds, then flip the Power switch to the OFF position.

Техникалык тейлөө

Tube алмаштыруу

The Peavey 6505 MH uses 2x EL84 power tubes and 3x 12AX7/ECC83 preamp tubes. The T.S.I. circuit provides an indication of power tube health. If a T.S.I. LED turns red, it indicates a potential issue with the corresponding power tube. Tube replacement should be performed by qualified service personnel to ensure proper biasing and safe operation. Always use high-quality replacement tubes.

Тазалоо

Сыртын тазалаңыз amplifier with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the amplifier is unplugged before cleaning.

Вентиляция

камсыз кылуу amplifier's ventilation grilles are clear of obstructions to allow for proper airflow. Overheating can reduce the lifespan of components, especially tubes.

Проблемаларды чечүү

• Үн жок:
  • Check all cable connections (guitar, speaker, power).
  • Ensure the Power and Standby switches are both in the ON position.
  • Verify the Attenuator switch is not set to an extremely low volume or the Speaker Defeat switch is not engaged unintentionally.
  • Check the T.S.I. LEDs for any red indications, suggesting a faulty power tube.
• Poor Tone/Weak Output:
  • Inspect tubes for visible damage or microphonics.
  • Ensure EQ settings are not extreme.
  • Check speaker cabinet impedance match.
• Ашыкча ысып кетүү:
  • айланасында жетиштүү желдетүүнү камсыз кылуу ampөмүрлүү.
  • Avoid operating in direct sunlight or enclosed spaces.
  • If persistent, this may indicate a bias issue or component failure, requiring professional service.
• Footswitch Not Working:
  • Ensure the footswitch cable is securely connected.
  • Test the functions manually using the front panel switches to isolate the issue.

For issues not resolved by these steps, contact Peavey customer support or a qualified service technician.

Техникалык шарттар

Image: Dimensions of the Peavey 6505 MH amplifier. The image shows the amplifier with its width (16.7 inches), depth (10.4 inches), and height (9.6 inches) clearly marked.

Кепилдик жана колдоо

For warranty information and technical support, please refer to the official Peavey website or contact Peavey customer service directly. Keep your proof of purchase for warranty claims. Do not attempt to repair the unit yourself, as this may void your warranty and expose you to electrical hazards.

Кошумча жардам алуу үчүн төмөнкүгө кириңиз: Пивей колдоо кызматы