Manfrotto XPRO Ball Head MHXPRO-BHQ2 with 200PL Quick Release Plate - Instruction Manual

1. Киришүү

Thank you for choosing the Manfrotto XPRO Ball Head MHXPRO-BHQ2. This high-precision ball head is designed for photographers and content creators seeking stability, versatility, and quick setup for their camera equipment. Featuring a robust magnesium body and an advanced triple locking system, it ensures secure camera positioning and smooth operation. This manual provides essential information for the proper setup, operation, and maintenance of your XPRO Ball Head.

2. Продукт бүтүп калдыview

The Manfrotto XPRO Ball Head MHXPRO-BHQ2 combines innovative technical solutions with a durable design. It is engineered to provide superior performance for various photographic needs.

Негизги өзгөчөлүктөрү:

• UNI Safety Payload: Ensures enhanced gear safety.
• Lightweight and Strong: Constructed from magnesium, weighing only 0.52 kg (1.1 lbs) and supporting up to 15 kg (22.05 lbs) of equipment.
• Максималдуу тактык: Features a leveling bubble and a triple locking system for precise framing.
• Коопсуз операция: Triple block system prevents accidental movements and vibrations.
• Combinable: Utilizes the widely popular Manfrotto 200PL plate for broad compatibility.
• Жылмакай кыймыл: New polymer rings ensure smooth, accurate, and less jerky camera movement.

Компоненттери:

• XPRO Ball Head body
• 200PL-14 Quick Release Plate
• Негизги кулпулоо баскычы
• Friction Control Knob
• Panoramic Rotation Knob
• Two Leveling Bubbles

Figure 1: Manfrotto XPRO Ball Head MHXPRO-BHQ2 with 200PL Quick Release Plate.

Figure 2: Manfrotto UNI Safety Payload feature highlighting enhanced equipment protection.

3. Орнотуу

3.1 Attaching the 200PL Quick Release Plate to Your Camera

1. Locate the 1/4-inch screw on the 200PL Quick Release Plate.
2. Align the screw with the tripod mount thread on the bottom of your camera or lens collar.
3. Tighten the screw securely using a coin or the integrated D-ring (if available) until the plate is firmly attached to your equipment. Ensure it is snug to prevent rotation.

3.2 Mounting Your Camera onto the XPRO Ball Head

1. Ensure the Main Locking Knob on the ball head is in the unlocked position (usually by turning counter-clockwise).
2. Press the safety release button (if present) and open the quick release lever on the ball head.
3. Slide the camera with the attached 200PL plate into the receiver on the ball head. Ensure it clicks into place.
4. Close the quick release lever firmly. The triple locking system will engage, securing your camera.
5. Gently test the camera's stability by attempting to move it. It should be securely locked.

4. Иштөө нускамалары

4.1 Adjusting Camera Position (Ball Movement)

1. To adjust the camera's angle (tilt and pan simultaneously), loosen the Негизги кулпулоо баскычы аны саат жебесине каршы буруп.
2. Carefully position your camera to the desired angle. The ball head allows for smooth, multi-directional movement.
3. Once the desired position is achieved, tighten the Негизги кулпулоо баскычы clockwise to secure the camera firmly. Always ensure the knob is fully tightened to prevent accidental movement or damage to your equipment.

4.2 Using Friction Control

The Friction Control Knob allows you to adjust the tension of the ball movement. This is particularly useful for balancing heavier camera setups or achieving smoother, controlled movements for video.

1. With the Main Locking Knob slightly loosened, turn the Friction Control Knob to increase or decrease the resistance of the ball's movement.
2. Adjust until the camera moves smoothly but holds its position when released, or provides the desired drag for video panning.

4.3 Panoramic Rotation

The XPRO Ball Head features an independent panoramic rotation for precise horizontal adjustments without affecting the tilt angle.

1. Ensure the Main Locking Knob is tightened to secure the ball.
2. бошотуңуз Panoramic Rotation Knob (located at the base of the ball head).
3. Rotate the camera horizontally to the desired position. The base is marked with degrees for accurate adjustments.
4. бекемдөө Panoramic Rotation Knob to lock the horizontal position.

4.4 Leveling Your Camera

The two integrated leveling bubbles assist in achieving perfectly level shots.

1. Observe the leveling bubbles while adjusting your tripod legs and the ball head.
2. Adjust the tripod legs and the ball head's position until the bubbles are centered, indicating a level setup.

5. Техникалык тейлөө

Regular maintenance ensures the longevity and optimal performance of your Manfrotto XPRO Ball Head.

• Тазалоо: Use a soft, dry cloth to wipe down the ball head after each use. For stubborn dirt, a slightly damp кездемени колдонсо болот, андан кийин дароо кургатуу. Абразивдүү тазалагычтардан же эриткичтерден качыңыз.
• Майлоо: The ball head uses polymer rings that do not require messy grease. Do not attempt to lubricate the ball mechanism yourself, as this can attract dust and impair performance.
• Сактагыч: Store the ball head in a clean, dry environment, away from extreme temperatures and humidity.
• Текшерүү: Periodically check all knobs and levers for tightness and proper function. Ensure the quick release plate mechanism operates smoothly and securely.

6. Кыйынчылыктарды

6.1 Camera Drifting or Not Holding Position

• Check Main Locking Knob: Ensure the main locking knob is fully tightened.
• Adjust Friction Control: If the camera is heavy, increase the friction using the friction control knob.
• Verify Plate Attachment: Make sure the 200PL plate is securely attached to your camera and fully engaged in the ball head's receiver.
• Payload Limit: Confirm your equipment weight does not exceed the maximum safety payload of 15 kg (22.05 lbs).

6.2 Stiff or Jerky Movement

• Туткаларды бошотуңуз: Ensure the main locking knob and friction control knob are adequately loosened for the desired movement.
• Таза беттер: Check for any dirt or debris on the ball or in the locking mechanism. Clean as per maintenance instructions.

6.3 Difficulty Engaging Quick Release Plate

• Check Lever Position: Ensure the quick release lever is fully open and the safety button (if applicable) is pressed.
• Inspect Plate: Verify the 200PL plate is not damaged or bent, which could prevent proper seating.

7. Техникалык шарттар

8. Кепилдик жана колдоо

Manfrotto products are known for their high quality and durability. The XPRO Ball Head MHXPRO-BHQ2 is proudly made in Italy, reflecting superior craftsmanship and design.

For specific warranty information, please refer to the warranty card included with your product or visit the official Manfrotto website. For technical support, spare parts, or service inquiries, please contact Manfrotto customer service through their official channels.