Introduction
Welcome to the user manual for the Rigol DS1054Z Digital Oscilloscope. This document provides essential information for the safe and effective use of your new instrument. The DS1054Z is a versatile 4-channel, 50 MHz digital oscilloscope designed for precise waveform analysis and measurement in various electronic applications.
Коопсуздук маалыматы
Please read all safety instructions carefully before operating the device to prevent injury or damage to the instrument.
- Кубат булагы: Осциллографтын туура вольттогу кубат булагына туташтырылганын текшериңизtage and frequency as specified on the device.
- Негиздөө: Always use a properly grounded power cord to prevent electric shock.
- Вентиляция: Do not block ventilation openings. Ensure adequate airflow around the instrument to prevent overheating.
- Курчап турган чөйрө: Operate the oscilloscope in a dry, clean environment, away from direct sunlight, high temperatures, humidity, and strong electromagnetic fields.
- Суюктук таасири: Avoid exposing the instrument to liquids. If liquid enters the device, disconnect power immediately and have it inspected by qualified service personnel.
- Тейлөө: Бардык тейлөө иштерин квалификациялуу тейлөө кызматкерлерине тапшырыңыз. Аспапты өз алдынча ачууга же оңдоого аракет кылбаңыз.
Пакеттин мазмуну
Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:
- Rigol DS1054Z Digital Oscilloscope
- 4 x Passive Probes (RP2200)
- Электр кабели
- USB кабели
- Калибрлөө сертификаты
- Quick Guide (Printed)
Image: Rigol DS1054Z Oscilloscope with its standard accessories, including four probes, power cord, and documentation.
Продукт бүттүview
Front Panel
Сүрөт: алдыңкы view of the Rigol DS1054Z, showing the large display, channel inputs, and control buttons.
The front panel features a large 7-inch WVGA (800x480) TFT display for clear waveform visualization. Key controls include:
- Channel Inputs (CH1-CH4): BNC connectors for connecting probes.
- Вертикалдык башкаруу элементтери: Knobs and buttons for adjusting vertical scale (Volts/Div) and position for each channel.
- Горизонталдык башкаруу элементтери: Knobs for adjusting horizontal scale (Sec/Div) and position.
- Триггерди башкаруу элементтери: Buttons and knobs for setting trigger level, mode, and source.
- Функция баскычтары: Dedicated buttons for Measure, Acquire, Storage, Cursor, Display, Utility, Help, and Menu navigation.
- USB хост порту: Located on the front for connecting USB storage devices.
Арткы панель
Сүрөт: Арткы view of the Rigol DS1054Z, showing power input, LAN, USB, and auxiliary ports. The serial number DS1ZA233608157 is visible.
Арткы панель маанилүү туташуу параметрлерин камсыз кылат:
- Кубат киргизүү: AC кубат шнурын туташтыруу үчүн.
- LAN порту: Тармакка туташуу жана алыстан башкаруу үчүн.
- USB түзмөгүнүн порту: Компьютерге туташуу үчүн.
- Aux (TrigOut / PassFail) Port: An auxiliary output for trigger signals or Pass/Fail testing.
Жайгашуу
Power Connection
- Ensure the oscilloscope is turned off.
- Берилген кубат шнурун осциллографтын арткы панелиндеги кубат киргизүүсүнө туташтырыңыз.
- Кубат шнурунун экинчи учун жерге туташтырылган AC розеткасына сайыңыз.
Probe Connection and Compensation
- Connect the probe to one of the BNC input channels (CH1-CH4) on the front panel.
- Attach the probe clip to the probe compensation test point (usually a square wave output) on the front panel.
- Turn on the oscilloscope.
- Adjust the probe compensation using a small screwdriver on the probe body until a flat-top square wave is displayed on the screen. This ensures accurate measurements.
Image: The Rigol DS1054Z in an operational setup, demonstrating probe connection and signal acquisition.
Иштөө нускамалары
Негизги өлчөөлөр
The DS1054Z offers a wide range of measurement capabilities:
- Канал тандоо: Use the CH1-CH4 buttons to enable or disable channels.
- Vertical Scale: Adjust the Volts/Div knob to change the vertical sensitivity.
- Горизонталдык масштаб: Adjust the Sec/Div knob to change the time base.
- Автоматтык орнотуу: басыңыз АВТО вертикалдык, горизонталдык жана триггер системаларын автоматтык түрдө орнотуу баскычы.
- Measure Function: басыңыз өлчөө button to display automatic measurements such as frequency, period, peak-to-peak voltage, жана башкалар.
- Математикалык функциялар: колдонуу MATH button for waveform operations like addition, subtraction, multiplication, division, FFT, and integration.
Multiple waveform display.
Single pulse waveform analysis.
Rising and falling edge signals.
Decoded serial data display.
Amplitude modulated waveform.
Complex multi-channel signal.
Lissajous figures for phase analysis.
Trigging
Triggering is crucial for stable waveform display. Use the trigger controls to set the trigger type (Edge, Pulse, Slope, Video, etc.), source (CH1-CH4, AC Line, External), and level. The DS1054Z supports advanced triggering options to capture specific events.
Waveform Display and Analysis
The UltraVision technology provides a deeper memory (12 Mpts, upgradable to 24 Mpts) and a high waveform capture rate (up to 30,000 wfms/s), allowing for the capture of transient events and detailed signal analysis. The multi-level intensity grading display helps visualize signal variations over time.
Техникалык тейлөө
- Тазалоо: Осциллографтын сыртын тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Өтө кир болсо, бир аз сүртүңүз.amp cloth with mild detergent can be used. Do not use abrasive cleaners or solvents.
- Сактагыч: Store the oscilloscope in a cool, dry place, away from direct sunlight and extreme temperatures. When not in use for extended periods, disconnect the power cord.
- Калибрлөө: For optimal performance, periodic calibration by qualified service personnel is recommended.
Проблемаларды чечүү
If you encounter issues with your Rigol DS1054Z, refer to the table below for common problems and solutions.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Күйгүзүлгөндөн кийин дисплей жок | Power cord not connected; Power switch off; Fuse blown. | Check power cord connection; Ensure power switch is on; Contact service for fuse replacement. |
| Толкун формасы көрсөтүлгөн жок | Probe not connected; Channel disabled; Vertical scale too high/low; Trigger not set correctly. | Connect probe; Enable channel; Adjust Volts/Div; Adjust trigger level/mode. |
| Туруксуз толкун формасы | Incorrect trigger settings; Probe compensation incorrect. | Adjust trigger level/mode/source; Perform probe compensation. |
| Ашыкча желдеткич ызы-чуу | Normal operation; Dust accumulation. | Ensure proper ventilation; Clean dust from vents (if accessible and safe). If persistent or unusual, contact support. |
Техникалык шарттар
Key technical specifications for the Rigol DS1054Z Digital Oscilloscope:
| Өзгөчөлүк | Спецификация |
|---|---|
| өткөрүү жөндөмдүүлүгү | 50 МГц |
| Каналдар | 4 |
| Реалдуу убакытта С.ample Rate | 1 GSa/s (single channel) |
| Memory Depth | 12 Mpts (upgradable to 24 Mpts) |
| Waveform Capture Rate | Up to 30,000 wfms/s |
| Дисплей | 7-inch WVGA (800x480) TFT |
| Байланыш | USB Host, USB Device, LAN, Aux (TrigOut / PassFail) |
| Өлчөмдөрү (L x W x Y) | 13 x 7 x 5 дюйм |
| Салмагы | 6.6 фунт |
| Модель номери | DS1054Z |
Кепилдик маалымат
The Rigol DS1054Z Digital Oscilloscope comes with a 3-ЖЫЛ warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the documentation provided with your product or visit the official Rigol webсайт.
Колдоо
For technical support, product inquiries, or service requests, please contact Rigol customer support through their official channels. You can find more information and resources on the Rigol Official Store on Amazon же алардын корпоративдик webсайт.
