Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your M-Wave Lock 'N' Roll Alarm Lock. Please read this manual carefully before using the product to ensure proper function and safety.
The M-Wave Lock 'N' Roll Alarm Lock is designed to provide enhanced security for your bicycle or other valuable items. It features a 600 x 2mm cable, a 4-digit customizable combination, and an integrated alarm system that activates upon movement or cable cutting. The alarm sensitivity is adjustable, and the unit is powered by included batteries.
Продукт бүттүview
Familiarize yourself with the components of your M-Wave Lock 'N' Roll Alarm Lock.
Key features include a built-in 90dB alarm, motion and cut detection, adjustable sensitivity, and a personal PIN code. The device is compact and lightweight, making it easy to transport.
Жайгашуу
1. Батареяны орнотуу
The M-Wave Lock 'N' Roll Alarm Lock requires 1 CR123A battery, which is included. To install or replace the battery:
- Locate the battery compartment on the back of the lock.
- Бөлүмдүн капкагын ачыңыз.
- Insert the CR123A battery, ensuring correct polarity (+/-).
- Батарея уясынын капкагын бекем жабыңыз.
2. Айкалышыңызды орнотуу
The lock comes with a default combination (usually 0000). You can set your personal 4-digit combination from 10,000 possibilities.
- Ensure the lock is in the "OPEN" position by aligning the current combination (default 0000) with the indicator marks.
- Locate the "SET" button, usually on the side or back of the lock.
- Press and hold the "SET" button. While holding it, rotate the dials to your desired 4-digit combination.
- Release the "SET" button. Your new combination is now set.
- Маанилүү: Write down your new combination and store it in a safe place. There is no master key or way to reset the combination if forgotten without knowing the current one.
Иштөө нускамалары
1. Аппаратты кулпулоо
- Align your set 4-digit combination to unlock the device.
- Press the release button to extend the cable head.
- Thread the cable through the item you wish to secure (e.g., bicycle frame, helmet, bag).
- Insert the cable head into the locking port on the main unit until you hear a click.
- Scramble the combination dials to secure the lock.
- The alarm will arm automatically after a few seconds, indicated by a beep.
2. Аппараттын кулпусун ачуу
- Align your personal 4-digit combination with the indicator marks.
- The lock will disarm and unlock.
- Press the release button to remove the cable head from the locking port.
3. Alarm Functionality
The alarm is designed to deter theft by sounding a loud 90-decibel alert if the lock is moved or the cable is cut.
- Кыймылды аныктоо: If the lock detects significant movement after being armed, it will emit a warning beep. Continued movement will trigger the full 90dB alarm.
- Cable Cut Detection: If the cable is severed, the alarm will immediately sound.
- Жөнгө салынуучу сезгичтик: The lock features adjustable sensitivity to help prevent accidental alarms. Refer to the "Maintenance" section for details on adjusting sensitivity.
Техникалык тейлөө
1. Батареяны алмаштыруу
When the alarm sound becomes weak or the lock fails to arm, it's time to replace the battery. Follow the steps outlined in the "Battery Installation" section under "Setup".
2. Тазалоо
Wipe the lock with a soft, damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз, анткени алар финишке же ички компоненттерге зыян келтириши мүмкүн.
3. Adjusting Alarm Sensitivity
The M-Wave Lock 'N' Roll Alarm Lock allows for adjustment of its motion sensor sensitivity. This can help reduce false alarms in windy conditions or busy environments.
(Note: Specific instructions for adjusting sensitivity are typically found on the product packaging or a small insert. As this information is not detailed in the provided data, general guidance is given. Users should refer to the physical product's included instructions for precise steps.)
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Alarm does not sound or is very weak. | Батарея аз. | Replace the CR123A battery. |
| Alarm triggers too easily (false alarms). | Сезимталдуулук өтө жогору коюлган. | Adjust the alarm sensitivity to a lower setting. Refer to the product packaging for specific instructions. |
| Cannot unlock the device. | Туура эмес комбинация киргизилген. | Ensure the correct 4-digit combination is aligned precisely with the indicator marks. Double-check your recorded combination. |
| Cable head does not insert or release smoothly. | Debris in the locking mechanism or cable port. | Inspect the cable head and locking port for any obstructions. Clean if necessary. |
Техникалык шарттар
- Модел: M-Wave Lock 'N' Roll Alarm Lock (Model Number: 230054)
- Кабелдин узундугу: Approximately 600 mm (60 cm) / 2mm diameter
- Сигналдын катуулугу: 90 дБ
- Комбинация: 4-digit resettable combination (10,000 possibilities)
- Кубат булагы: 1 x CR123A battery (included)
- Продукциянын өлчөмдөрү: 10 x 19.5 x 2.5 см
- Элемент Салмагы: 120 г
- Түсү: Light Grey (housing)
- Өзгөчөлүктөр: Alarm, Adjustable Sensitivity, Motion and Cable Cut Detection
Кепилдик жана колдоо
For warranty information and customer support, please contact M-Wave directly or refer to the official M-Wave webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.
Өндүрүүчү: Cycle Force Group, LLC.
Биринчи жеткиликтүү болгон күнү: 22-декабрь, 2015-жыл
For additional resources and product information, visit the official M-Wave webсайт: www.m-wave-bike.com