Introduction
This manual provides essential information for the safe and effective use of your Tattu 11.1V 1800mAh 3S 45C LiPo Battery Pack. Tattu LiPo batteries are designed for high-performance applications, particularly in UAV and UAS markets, offering superior quality and reliability. Please read this manual thoroughly before using the battery.
Image: The Tattu 11.1V 1800mAh 3S 45C LiPo Battery Pack, featuring its black and orange label, XT60 connector, and balance lead.
Коопсуздук маалыматы
WARNING: Lithium Polymer (LiPo) batteries are powerful and can be dangerous if not handled correctly. Failure to follow these instructions can result in fire, personal injury, and property damage.
- Батареяны отко ыргытпаңыз.
- Заряддоочу батареяларды эч качан кароосуз калтырбаңыз.
- Always charge LiPo batteries on a fire-resistant surface and away from flammable materials.
- Use only chargers specifically designed for LiPo batteries and ensure correct voltage and cell count settings.
- Do not overcharge or over-discharge the battery. Overcharging can lead to fire, and over-discharging can damage the battery.
- Do not puncture, disassemble, short circuit, or modify the battery.
- Батареяларды балдар жана үй жаныбарлары жетпеген жерде сактаңыз.
- If the battery swells, smokes, or gets excessively hot, immediately disconnect it and move it to a safe, non-flammable area.
- Store batteries in a cool, dry place, ideally in a LiPo-safe bag or container.
Кутуда эмне бар
Your Tattu LiPo Battery Pack package includes:
- 1x Tattu 1800mAh 45C 3S1P LiPo Battery Pack with XT60 Plug
- Колдонуучунун Колдонмосу (бул документ)
Image: The Tattu LiPo battery alongside its black packaging box and a small instruction leaflet.
Жайгашуу
Алгачкы текшерүү
Upon receiving your Tattu LiPo battery, carefully inspect it for any signs of damage, such as swelling, punctures, or damaged wires/connectors. If any damage is observed, do not use the battery and contact customer support.
Биринчи кубат
Before first use, it is recommended to fully charge the battery. Use a compatible LiPo balance charger. Connect the main XT60 plug to the charger's output and the JST-XH balance plug to the charger's balance port. Set your charger to the correct cell count (3S for this battery) and charging current (typically 1C, which is 1.8A for an 1800mAh battery). Always monitor the charging process.
Сүрөт: Жакын план view of the Tattu LiPo battery's XT60 main connector, JST-XH balance connector, and internal cell configuration (3S1P).
Иштеп жатат
Түзмөккө туташуу
Ensure your device (e.g., drone, RC vehicle) is powered off before connecting the battery. Connect the XT60 plug of the battery to the corresponding XT60 connector on your device. Ensure a secure connection.
Чыгаруу боюнча көрсөтмөлөр
Avoid over-discharging your LiPo battery. The minimum safe voltage for a 3S LiPo battery is 3.0V per cell, or 9.0V total. It is highly recommended to stop using the battery when any cell reaches 3.5V-3.7V under load to prolong its lifespan. Over-discharging can permanently damage the battery and reduce its capacity.
Image: The Tattu LiPo battery centrally positioned, surrounded by various drone models it is compatible with, such as the Skylark M4-FPV250, Mini Shredder 200, and QAV250.
Техникалык тейлөө
Сактагыч
For long-term storage, charge or discharge the battery to its storage voltage, typically 3.8V-3.85V per cell (11.4V-11.55V for a 3S battery). Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures. A LiPo-safe bag or fireproof container is recommended.
Баланстоо
Regularly balance charge your LiPo battery to ensure all cells maintain similar voltage levels. This is crucial for battery health and longevity.
Температура
Avoid operating or charging the battery in extreme temperatures. Optimal operating temperature is between 0°C and 40°C (32°F and 104°F). Do not charge a cold battery; allow it to warm up to room temperature first.
Проблемаларды чечүү
- Батарея заряддалбай жатат:
- Ensure all connections (main and balance leads) are secure.
- Verify charger settings match battery specifications (3S, LiPo mode).
- Батареяда же заряддоочу түзүлүштө кандайдыр бир көрүнүктүү бузулуулар бар-жогун текшериңиз.
- Reduced Flight/Run Time:
- Battery may be aging or has been over-discharged.
- Ensure battery is fully balance charged before use.
- Check for high internal resistance (if your charger can measure it), which indicates battery degradation.
- Батареянын шишип кетиши:
- Immediately stop using and charging the battery.
- Move the battery to a safe, non-flammable location.
- Swelling indicates internal damage, often due to overcharging, over-discharging, or physical impact. The battery should be safely disposed of.
Техникалык шарттар
Detailed specifications for the Tattu 11.1V 1800mAh 3S 45C LiPo Battery Pack:
| Параметр | Нарк |
|---|---|
| Батарея сыйымдуулугу | 1800mAh |
| Батарея Voltage | 11.1V |
| Разряд | 45C |
| Клетка конфигурациясы | 3S1P |
| Туташтыргыч түрү | XT60 Plug |
| Balancer Connector | JST-XH |
| Салмагы | 158г (5.6 унция) |
| Өлчөмдөрү (L*W*H) | х 106mm 35.5 х 21 (4.17 х 1.41 х 0.82 дюйм) |
Image: A graphic displaying the key specifications of the Tattu 1800mAh LiPo battery, including capacity, voltage, discharge rate, cell configuration, connector types, and weight.
Image: A visual representation of the Tattu LiPo battery's dimensions, showing its length (107mm), width (35mm), and height (21mm), with a note about a ±3mm error tolerance.
Кепилдик жана колдоо
Tattu products are manufactured to high standards. For specific warranty information or technical support, please refer to the official Tattu webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.
Көбүрөөк маалымат алуу үчүн, сиз иш сапары менен болот Tattu Store on Amazon.
