1. Киришүү
The Inkbird IDC-S1RH is a high-performance digital preset scale counter designed for precise counting and control in various industrial applications. This device features a compact DIN (48x48mm) size, clear LED displays for both process value (PV) and set value (SV), and user-friendly tactile switches for easy parameter configuration. It supports both NPN and PNP input types and offers SSR and contact outputs, making it versatile for different control systems. The built-in EEPROM ensures data retention for up to 10 years, providing reliable operation.
2. Продукциянын өзгөчөлүктөрү
- Digital DIN Counter: Standard 48x48mm panel mount design.
- Эсептөө диапазону: 1-9999 with selectable UP/DOWN counting modes.
- Maximum Counting Speed: Up to 5 kcps (kilocounts per second) at a 1:1 rate.
- Preset Scale Range: Configurable from 0.001 to 9.999.
- Маалыматтарды сактоо: EEPROM stores data for up to 10 years without power.
- Киргизүү шайкештиги: Supports both NPN and PNP input types, switchable.
- Колдонуучу интерфейси: Tactile switches for intuitive setting adjustments.
- Ачкычты кулпулоо функциясы: Орнотууларды кокусунан өзгөртүүгө жол бербейт.
- Дисплей: High-visibility LED displays; 9.9mm red LED for Process Value (PV) and 8mm green LED for Set Value (SV).
- Электр камсыздоо: AC 100-240V ± 10% 50/60Hz.
- Чыгуу түрлөрү: Contact output (AC250V 3A resistive load, ON/NC) and SSR output (DC 12V, Max. 40mA).
- Тышкы күч: DC 12V/50mA (max.) for sensor use.
3. Коопсуздук маалыматы
Please read and understand all instructions before installation and operation. Failure to follow these instructions may result in product damage, property damage, or personal injury.
- электр менен жабдууну камсыз кылуу voltage аппараттын спецификацияларына дал келет.
- Зымдарды туташтыруудан же техникалык тейлөөдөн мурун электр кубатынан ажыратыңыз.
- Орнотуу квалификациялуу кызматкерлер тарабынан гана аткарылышы керек.
- Do not operate the device in environments with excessive moisture, dust, corrosive gases, or high temperatures beyond specified limits.
- Avoid strong vibrations or impacts to the device.
- Аппаратты ажыратпаңыз же өзгөртпөңүз.
4. Пакеттин мазмуну
Пакетте бардык буюмдар бар экенин текшериңиз:
- 1 x Inkbird IDC-S1RH Digital Counter
- 1 x Connector Plug (for wiring terminals)
- 1 x Англис тили боюнча нускама
4.1-сүрөт: Package contents including the IDC-S1RH counter, connector plug, and manual.
5. Продукт бүтүп калдыview жана компоненттер
The IDC-S1RH features a clear front panel for display and control, and a rear panel for electrical connections.
5.1-сүрөт: Фронт view of the IDC-S1RH Digital Counter. It displays the Process Value (PV) and Set Value (SV) and includes buttons for 'MD' (Mode), 'RST' (Reset), and arrow keys for value adjustment.
6. Орнотуу жана зымдар
6.1 Панелди орнотуу
The IDC-S1RH is designed for panel mounting. Create a cutout in your panel with dimensions of 45mm x 45mm (1.77 x 1.77 inches). Insert the counter into the cutout and secure it using the provided mounting brackets.
6.2 Зымдарды туташтыруу
Refer to the wiring diagrams below for proper electrical connections. Ensure all connections are secure and correct before applying power.
6.1-сүрөт: Side view showing the wiring diagram for the IDC-S1RH. It details connections for IN, Gate, Reset, +12V, 0V, NC, COM, NO, and Power.
6.2-сүрөт: Арткы view of the IDC-S1RH, illustrating the screw terminal block for electrical connections. Terminals are numbered for easy identification.
Терминал сүрөттөмөлөрү:
- IN (Terminal 1): Counting input. Connect your NPN/PNP sensor here.
- Gate (Terminal 2): Gate input for enabling/disabling counting.
- Reset (Terminal 3): External reset input.
- +12V (Terminal 4): 12V DC output (max. 50mA) for powering external sensors.
- 0V (Terminal 5): Ground for external sensor power.
- NC (Terminal 6): Normally Closed contact output.
- COM (Terminal 7): Common terminal for contact output.
- NO (Terminal 8): Normally Open contact output.
- Power (Terminals 9 & 10): AC 100-240V power input.
- SSR Output (Terminals 11 & 12): DC 12V (Max. 40mA) Solid State Relay output.
7. Операция
7.1 Кубат күйгүзүлдү
After proper wiring, apply power to the device. The display will illuminate, showing the current count (PV) and the set value (SV).
7.2 Adjusting Set Value (SV)
- басыңыз MD button briefly to enter the setting mode for the Set Value. The SV display will start flashing.
- колдонуу Up (
) жана Төмөн () arrow buttons to increase or decrease the flashing digit. - басыңыз MD button again to move to the next digit.
- Once the desired SV is set, press and hold the MD button for a few seconds to save the setting and exit the setting mode.
7.3 Resetting the Count
The counter can be reset in three ways:
- Кол менен баштапкы абалга келтирүү: басыңыз RST алдыңкы панелиндеги баскыч.
- External Reset: Apply a signal to the Reset terminal (Terminal 3).
- Power On Reset: The counter can be configured to reset automatically upon power cycling (refer to parameter settings).
7.4 Ачкычты кулпулоо функциясы
To prevent accidental changes to the settings, the key lock function can be activated. Refer to the parameter settings section for instructions on enabling and disabling this feature.
8. Параметрлердин Орнотуулары
The IDC-S1RH has several configurable parameters to adapt to different applications. Accessing and adjusting these parameters typically involves pressing and holding the MD button for an extended period (e.g., 3-5 seconds) to enter the parameter menu. Use the Up/Down arrows to navigate through parameters and adjust their values, and the MD button to confirm and move to the next parameter.
Жалпы параметрлерге төмөнкүлөр кирет:
- Эсептөө режими: Select between UP or DOWN counting.
- Киргизүү Түрү: Switch between NPN and PNP sensor inputs.
- Preset Scale Factor: Adjust the multiplication factor (0.001 - 9.999) for the input pulses to display the desired unit.
- Чыгуу режими: Configure the behavior of the relay and SSR outputs (e.g., momentary, latched).
- Баштапкы абалга келтирүү: Set whether the counter resets on power-up or only via manual/external trigger.
- Ачкыч кулпусу: Enable or disable the key lock function.
- Маалыматтарды сактоо: Configure if data is stored in EEPROM or not.
For a detailed list of parameters and their specific adjustment procedures, please refer to the comprehensive manual included in the product package.
9. Техникалык тейлөө
The Inkbird IDC-S1RH is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity:
- Тазалоо: Дисплейди акырын сүртүп, casing жумшак, кургак чүпүрөк менен. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Экологиялык шарттар: Ensure the operating environment remains within the specified temperature and humidity ranges. Avoid exposure to direct sunlight, excessive heat, or extreme cold.
- Туташуу текшерүүлөрү: Зымдардын туташууларынын бекем жана дат баспагандыгын текшерүү үчүн мезгил-мезгили менен текшерип туруңуз.
10. Кыйынчылыктарды
If you encounter issues with your IDC-S1RH counter, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Түзмөк күйбөйт. | Электр энергиясы жок; зымдар туура эмес туташтырылган; электр булагы бузук. | Check power connections (Terminals 9 & 10). Verify power source voltage. Ensure wiring is correct according to the diagram. |
| Counter is not counting. | Sensor not connected; incorrect sensor type (NPN/PNP); faulty sensor; Gate input active; counting speed too high/low for sensor. | Check sensor wiring to IN (Terminal 1). Verify sensor type setting (NPN/PNP). Ensure Gate input (Terminal 2) is not preventing counting. Test sensor functionality. Adjust counting speed if possible. |
| Output does not activate. | Incorrect output wiring; set value not reached; output mode misconfigured; faulty relay/SSR. | Verify output wiring (Terminals 6, 7, 8 for contact; 11, 12 for SSR). Ensure the count reaches the set value. Check output mode parameters. Test the load connected to the output. |
| Орнотууларды өзгөртүү мүмкүн эмес. | Key lock function is active. | Disable the key lock function in the parameter settings. |
| Display shows erratic values. | Electrical noise/interference; loose connections. | Ensure proper grounding. Use shielded cables for sensor inputs if interference is suspected. Check all wiring connections for tightness. |
If the problem persists after attempting these solutions, please contact Inkbird customer support.
11. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Өндүрүүчү | Inkbird Tech |
| Модель номери | IDC-S1RH-110 |
| Кубат булагынын түрү | Электр зымдары |
| Тtage | AC 100-240V ± 10% 50/60Hz |
| Тышкы энергия чыгаруу | DC 12V / 50mA (max.) for sensors |
| Дисплей | PV: 4-digit, 9.9mm red LED; SV: 4-digit, 8mm green LED |
| Саноо диапазону | 1-9999 |
| Max Counting Speed | 5 kcps (rate 1:1) |
| Preset Scale Range | 0.001 - 9.999 |
| Киргизүү түрү | NPN and PNP switchable |
| Contact Output | AC250V 3A (resistive load) ON/NC |
| SSR чыгаруу | DC 12V (Max. 40mA) |
| Механикалык өмүр | 10,000,000 operations Min. |
| Electronic Lifespan | 100,000 operations Min. |
| Маалыматтын камдык көчүрмөсү | 10 жыл (EEPROM) |
| Баштапкы абалга келтирүү | Power On / External / Manual |
| Cutout Size | 45мм x 45мм |
| Иштөө температурасы | -10 to 55°C (14 to 131°F) (no icing or condensation) |
| Сактоо температурасы | -25 to 65°C (-13 to 149°F) (no icing or condensation) |
| Айлана-чөйрөнүн нымдуулугу | 35 - 85% RH |
| Пакеттин өлчөмдөрү | 13.72 x 6.35 x 5.59 см (5.4 x 2.5 x 2.2 дюйм) |
| Салмагы | 204.11 г (7.2 унция) |
| UPC | 705701587019 |
12. Кепилдик жана колдоо
12.1 Кепилдик маалыматы
Inkbird products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Inkbird website. The warranty typically covers defects in materials and workmanship under normal use for a specified period from the date of purchase.
12.2 Кардарларды колдоо
If you have any questions, require technical assistance, or need to report an issue with your Inkbird IDC-S1RH Digital Preset Scale Counter, please contact Inkbird customer support through their official website or the contact information provided in your product documentation. When contacting support, please have your product model number (IDC-S1RH) and purchase details ready.
