Utilitech White Touch Lamp Control

1. Продукт бүтүп калдыview

The Utilitech Plug-in Touch Control Dimmer is designed to convert any lamp with a metal socket into a touch-controlled lamp. This device provides three distinct levels of illumination, allowing users to easily adjust lighting from a subtle night light to full brightness. Operation is simplified by merely touching the lamp's metal surface to cycle through light settings or to turn the lamp on and off. It is compatible with incandescent bulbs up to 200 watts and is engineered for straightforward installation.

Image 1.1: The Utilitech Plug-in Touch Control Dimmer. This compact white unit plugs directly into a wall outlet and features a receptacle for the lamp's power cord.

2. Коопсуздук маалыматы

• l камсыз кылууamp control is used with incandescent bulbs only, up to a maximum of 200 watts. Do not exceed the specified wattage.
• This device is intended for indoor use only. Do not expose to moisture or extreme temperatures.
• Ар дайым lamp from the control unit and the control unit from the wall outlet before performing any maintenance or changing bulbs.
• Агрегатты ажыратууга же өзгөртүүгө аракет кылбаңыз. Бардык тейлөөлөрдү квалификациялуу кызматкерлерге тапшырыңыз.
• Балдар жетпеген жерде сактаңыз.
• l камсыз кылууamp you intend to convert has a metal socket for proper touch functionality.

3. Пакеттин мазмуну

• 1 x Utilitech White Touch Lamp Башкаруу бирдиги

4. Орнотуу жана орнотуу

1. L даярдагылаamp: Сиздин l камсыз кылууamp has a metal socket. Unplug the lamp анын кубат булагынан.
2. Башкаруу блогун туташтыруу: Plug the Utilitech Touch Lamp Control unit into a standard 120V AC wall outlet.
3. L туташтырууamp: Сиздин lamp's power cord into the receptacle on the Utilitech Touch Lamp Башкаруу бирдиги.
4. Лампанын түрүн текшерүү: lamp contains an incandescent bulb, not exceeding 200 watts. LED or CFL bulbs may not function correctly or may cause damage.
5. Баштапкы сыноо: Once connected, touch any metal part of the lamp's base or body. The lamp should turn on to its lowest setting.

Маанилүү эскертүү: For optimal performance, ensure the lamp's metal components are clean and free of non-conductive coatings or paint where touch contact is intended.

5. Иштөө нускамалары

The Utilitech Touch Lamp Control provides three levels of brightness and an off state, cycled by touching the lamp's metal surface.

• To Turn On (Low Brightness): Touch any metal part of the lamp. Лamp will illuminate at its lowest brightness setting (night light).
• To Increase Brightness (Medium): lamp again. The brightness will increase to a medium level.
• To Increase Brightness (High): lamp a third time. The brightness will increase to its highest level (full brightness).
• Өчүрүү: lamp a fourth time. The lamp өчөт.

The cycle repeats with each subsequent touch: Off → Low → Medium → High → Off.

6. Техникалык тейлөө

• Тазалоо: Disconnect the unit from the power outlet before cleaning. Wipe the control unit with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• Лампаны алмаштыруу: Ар дайым lamp from the control unit and the control unit from the wall outlet before replacing a light bulb. Ensure the replacement bulb is an incandescent type and does not exceed 200 watts.
• Сактагыч: If storing the unit for an extended period, unplug it from the wall outlet and store it in a cool, dry place.

7. Кыйынчылыктарды

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information or technical support, please refer to the product packaging or contact Utilitech customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, please visit the official Utilitech website or contact their customer support line. Contact details are typically provided on the product packaging or within the original sales documentation.