Introduction
This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your LUXOR FP4000 Adjustable-Height Large-Capacity LCD TV Stand. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.
The LUXOR FP4000 is designed to accommodate large flat-panel TVs from 40" to 80", supporting up to 200 lbs. It features adjustable viewing heights, an integrated cable management system, a convenient accessory shelf, and mobile casters with locking brakes for versatile display solutions.
Коопсуздук маалыматы
- Монтаждоодон мурун бардык компоненттер бар экенин жана бузулбаганын текшериңиз.
- Do not exceed the maximum weight capacity of 200 lbs for the TV mount and 25 lbs for the accessory shelf.
- Always use two or more people for assembly and moving the stand with a TV mounted.
- Ensure all screws are securely tightened before use. Do not overtighten.
- Engage the locking brakes on all casters when the stand is in a stationary position.
- Балдарды жана үй жаныбарларын чогултуу аянтынан алыс кармаңыз.
- Таңгактоочу материалдарды жоопкерчилик менен таштаңыз.
Пакеттин мазмуну
Please verify that all parts are included in your package. If any parts are missing or damaged, contact Luxor customer support.
- Base Assembly with Casters
- Vertical Support Columns (2)
- Телевизор монтаждоо кронштейн
- Аксессуар текчеси
- Hardware Kit (screws, washers, tools)
- Instruction Manual
Сүрөт: бүттүview of the LUXOR FP4000 Adjustable-Height Large-Capacity LCD TV Stand, showing its main components including the base, vertical columns, TV mount, and accessory shelf.
Орнотуу жана чогултуу
Туура чогултуу үчүн бул кадамдарды кылдаттык менен аткарыңыз. Чогултуу үчүн кеминде эки адамдын болушу сунушталат.
Step 1: Attach Vertical Support Columns to Base
- Place the base assembly on a flat, stable surface.
- Align the vertical support columns with the mounting points on the base.
- Secure the columns using the provided screws and tools. Ensure they are firmly attached.
Сүрөт: А view of the TV stand during assembly, showing the vertical support columns being attached to the mobile base. This image highlights the structural connection points.
Step 2: Install TV Mounting Bracket
- Attach the TV mounting bracket to the top of the vertical support columns.
- Use the designated screws and ensure the bracket is level and secure.
- Refer to your TV's manual for specific VESA mounting patterns and screw sizes.
Image: The TV stand with the mounting bracket installed at the top of the vertical columns, ready to receive a television. This shows the upper part of the stand.
Step 3: Attach Accessory Shelf
- Position the accessory shelf at your desired height on the vertical support columns.
- Secure the shelf using the provided hardware. Ensure it is level and stable.
Image: The LUXOR FP4000 TV Stand with the accessory shelf attached to the vertical columns, positioned below the TV mounting bracket. This illustrates the shelf's placement.
4-кадам: Телевизорду орнотуңуз
- Carefully lift your television and align its VESA mounting holes with the bracket on the stand.
- Secure the TV to the bracket using the appropriate screws and spacers from the hardware kit.
- Ensure the TV is securely fastened and level before releasing it.
Image: A fully assembled LUXOR FP4000 TV Stand, viewed from the front, with a television mounted on its bracket and the accessory shelf in place. This shows the complete product.
Иштөө нускамалары
Adjusting TV Height
The TV mounting bracket can be adjusted in 2-inch increments from 48" to 65" (measured from the floor to the center of the TV). To adjust the height:
- With two people, carefully lift the TV slightly to relieve pressure on the locking pins.
- Locate the height adjustment pins on the vertical columns.
- Pull out the pins, adjust the TV to the desired height, and re-insert the pins securely into the corresponding holes.
- Ensure both sides are adjusted to the same height and pins are fully engaged before releasinтелевизорду.
Стендди жылдыруу
The stand is equipped with four 3" full-swivel casters for mobility.
- To move the stand, ensure all caster brakes are disengaged.
- Push the stand carefully to its new location. Avoid sudden movements or pushing over uneven surfaces.
- Once in the desired position, engage the locking brakes on all four casters to secure the stand.
Кабель башкаруу
Utilize the integrated cable management system within the steel columns to keep cables organized and out of sight. Route TV and accessory cables through the designated openings in the columns for a clean and professional appearance.
Техникалык тейлөө
- Тазалоо: Беттерди жумшак менен сүртүңүз, гamp кездеме. Абразивдүү тазалагычтардан же эриткичтерден качыңыз.
- Аппараттык камсыздоону текшерүү: Мезгил-мезгили менен бардык бурамалар менен болтторду текшерип туруңуз, алар бекем бойдон калууда. Керек болсо кайра тартыңыз.
- Кастер инспекциясы: Inspect casters for debris or damage. Clean as needed to ensure smooth operation.
- Салмактык чектөөлөр: Always adhere to the specified weight limits for the TV and accessory shelf.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Туруктуу же туруксуз. | Бошогон бурамалар же тегиз эмес бет. | Check and tighten all assembly screws. Move stand to a level surface. Ensure caster brakes are engaged. |
| Дөңгөлөктөр тегиз жылбайт. | Debris in casters or engaged brakes. | Clear any debris from the caster wheels. Ensure all caster brakes are disengaged. |
| TV height adjustment is difficult. | Weight on pins or pins misaligned. | Ensure two people are lifting the TV slightly to relieve pressure. Verify pins are correctly aligned with holes. |
| Accessory shelf is not level. | Туура эмес орнотуу. | Re-install the accessory shelf, ensuring it is properly seated and secured at both attachment points. |
Техникалык шарттар
- Модел: FP4000
- Бренд: Луксор
- Материал: Эритме болот
- Түсү: Кара
- Шайкеш сыналгы өлчөмдөрү: 40" to 80" flat-panel TVs
- Телевизордун максималдуу салмагы: 200 фунт
- Стенд өлчөмдөрү: 39.25"W x 28.25"D x 48" to 65"H (adjustable in 2" increments)
- Accessory Shelf Dimensions: 19.625"W x 11"D
- Accessory Shelf Weight Capacity: 25 фунт
- Роликтер: Four 3" full-swivel casters, all with locking brakes
- Монтаж түрү: Жөнгө салынуучу
- UPC: 847210034896
Image: The LUXOR FP4000 TV Stand, illustrating its overall dimensions and key features. This image provides a visual reference for the product's size and design.
Кепилдик жана колдоо
For warranty information, technical support, or to order replacement parts, please contact Luxor customer service. Refer to the official Luxor webакыркы байланыш маалыматтары жана кепилдик саясаты үчүн сайт.
Luxor Customer Service: Visit Luxor Contact Us Page
Please have your model number (FP4000) and purchase date available when contacting support.
