BOSCH BC1650 QuietCast Premium Ceramic Disc Brake Pad Set

1. Киришүү

This manual provides essential information for the installation, maintenance, and general understanding of your BOSCH BC1650 QuietCast Premium Ceramic Disc Brake Pad Set. These front brake pads are designed for select Nissan Altima (2013-2023) and Nissan Leaf (2011-2017) vehicles. The Bosch QuietCast line offers OE quality performance, durability, and innovative features for a superior braking experience.

Маанилүү: Always verify specific vehicle fitment details using the provided fit checker or consult a qualified automotive technician.

2. Продукциянын өзгөчөлүктөрү

The Bosch QuietCast Premium Ceramic Disc Brake Pad Set incorporates advanced technology to deliver reliable and quiet braking performance.

2.1. QuietCast Technology

The QuietCast line utilizes Molded Shim Technology (MST) with pre-attached OE style multilayer rubber core shims. This design ensures a high-quality bond between rubber and steel, contributing to reduced noise, increased strength, and enhanced corrosion resistance.

Figure 1: Illustration of Bosch QuietCast Molded Shim Technology, highlighting the rubber core shim for noise reduction and durability.

2.2. Ceramic Friction Material

The proprietary ceramic friction material is rigorously formulated and tested to provide robust performance, exceptional stopping power, and quiet operation with low dust accumulation.

Figure 2: ашыкview of the Bosch QuietCast Premium Ceramic Disc Brake Pad Set, including four pads, hardware, and lubricant.

2.3. Durability and Fitment

Powder-coated backing plates prevent rust and corrosion, extending the product life. OE style slots and chamfers ensure premium quality, fit, and function, matching original equipment specifications.

Figure 3: Icons highlighting OE Fit and Longer Life features of the brake pads.

3. Кутуда эмне бар

Each BOSCH BC1650 QuietCast Premium Ceramic Disc Brake Pad Set includes the following components:

• Four (4) Ceramic Disc Brake Pads (for 1 axle / 2 wheels)
• One (1) Hardware Kit (where applicable)
• One (1) Synthetic Lubricant packet

4-сүрөт: Детальдуу view of the brake pads, hardware, and lubricant included in the kit.

4. Орнотуу боюнча нускамалар

Жоопкерчиликтен баш тартуу: Brake system work requires specialized knowledge and tools. Improper installation can lead to brake failure, serious injury, or death. It is highly recommended that installation be performed by a certified automotive technician.

4.1. Коопсуздук чаралары

• Ар дайым тиешелүү жеке коргонуу шаймандарын (ЖКК), анын ичинде коргоочу көз айнектерди жана кол каптарды кийиңиз.
• Унаа тегиз жердеги домкраттарда бекем орнотулгандыгын текшериңиз.
• Never rely solely on a jack for vehicle support.
• Consult your vehicle's service manual for specific torque specifications and procedures.

4.2. General Installation Steps (Front Axle)

1. Унааны даярдоо: Park the vehicle on a level surface, engage the parking brake, and block the rear wheels. Loosen the front wheel lug nuts, then raise the front of the vehicle and secure it with jack stands. Remove the front wheels.
2. Эски тормозду алып салуу: Locate the brake caliper. Remove the caliper guide pin bolts and carefully slide the caliper off the rotor. Support the caliper to avoid stressing the brake hose. Remove the old brake pads from the caliper bracket.
3. Текшерүү жана тазалоо: Inspect the brake rotor for wear, scoring, or warping. If necessary, replace the rotors. Clean the caliper bracket and hardware mounting points thoroughly with a wire brush and brake cleaner.
4. Жаңы жабдыктарды орнотуу: Install the new hardware clips (where provided) onto the caliper bracket. Apply a thin layer of the included synthetic lubricant to the contact points where the brake pads will slide.
5. Жаңы тормоздук такталарды орнотуу: Insert the new Bosch QuietCast brake pads into the caliper bracket, ensuring they fit securely and slide freely.
6. Калиперди кайра чогултуу: Carefully slide the caliper back over the new pads and rotor. Reinstall the caliper guide pin bolts and tighten them to the manufacturer's specified torque.
7. Bleed Brakes (if necessary): If the brake system was opened or air entered the lines, bleed the brakes according to your vehicle's service manual.
8. Дөңгөлөктөрдү кайра орнотуу: Reinstall the wheels and hand-tighten the lug nuts. Lower the vehicle to the ground and tighten the lug nuts to the manufacturer's specified torque in a star pattern.
9. Кирүү тартиби: Follow the recommended break-in procedure for new brake pads to ensure optimal performance and longevity. This typically involves a series of moderate stops from varying speeds without coming to a complete stop, allowing the pads to properly seat with the rotors. Consult the packaging or Bosch website for specific break-in recommendations.

5. Техникалык тейлөө

Сиздин тормоз системасын үзгүлтүксүз текшерүү жана тейлөө коопсуздук жана аткаруу үчүн абдан маанилүү болуп саналат.

• Күнүмдүк текшерүү: Inspect brake pads, rotors, and fluid levels at least twice a year or every 10,000 miles, whichever comes first.
• Тормоз суюктугу: Check brake fluid levels and condition. Replace brake fluid according to your vehicle manufacturer's recommendations.
• Төшөк кийими: Replace brake pads when the friction material wears down to the minimum thickness specified by the manufacturer (typically 2-3mm).
• Ротордун абалы: Ensure rotors are free from deep grooves, cracks, or excessive runout. Replace rotors if they are below minimum thickness or severely damaged.

6. Кыйынчылыктарды

If you experience any of the following issues, consult a qualified technician immediately:

• Чыйылдаган же кычыраган үн: This often indicates worn brake pads or issues with the caliper hardware.
• Тормоздоо учурундагы вибрация: May suggest warped rotors or uneven pad wear.
• Жумшак же губкалуу тормоз педалы: Could be a sign of air in the brake lines or a brake fluid leak.
• Vehicle Pulling to One Side: Can indicate uneven brake wear, a seized caliper, or hydraulic issues.
• Excessive Brake Dust: While QuietCast pads are designed for low dust, excessive dust could indicate an underlying issue or improper break-in.

7. Техникалык шарттар

8. Кепилдик жана колдоо

Bosch Automotive products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your product or visit the official Bosch Automotive webсайт. Техникалык колдоо же суроолор боюнча Bosch кардарларды тейлөө кызматына кайрылыңыз.

Bosch унаа дүкөнү: Дүкөнгө кириңиз