TOPGREENER TSOS5-W In-Wall PIR Motion Sensor Light Switch User Manual

1. Киришүү

The TOPGREENER TSOS5-W is an in-wall Passive Infrared (PIR) motion sensor light switch designed to automatically control lighting, fans, and motors based on occupancy detection. This single-pole switch requires a neutral wire for proper operation and offers AUTO, ON, and OFF modes for flexible control. It is suitable for various indoor applications, providing convenience and energy savings.

2. Коопсуздук боюнча маанилүү маалымат

ЭСКЕРТҮҮ: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse and test that the power is off before wiring. Installation should be performed by a qualified electrician or a person with electrical knowledge.

• This device requires a neutral wire for installation. Verify the presence of a neutral wire in your electrical box before proceeding.
• For single-pole use only. Do not use in 3-way or multi-way switch configurations.
• Do not exceed the maximum load ratings: CFL/LED: 150W; Incandescent/Halogen: 500W; Motor: 1/8 HP; Fluorescent 500VA.
• Бардык зым байланыштары коопсуз жана туура изоляцияланганын текшериңиз.
• Үй ичинде гана колдонуу.

3. Пакеттин мазмуну

• TOPGREENER TSOS5-W Motion Sensor Switch
• Wire Nuts
• Instruction Manual

Note: Wall plate sold separately.

4. Продукттун спецификациялары

5. Орнотуу боюнча нускамалар

Баштоодон мурун: Ensure power is OFF at the circuit breaker. This device requires a neutral wire. If you are unsure about your wiring, consult a qualified electrician.

5.1 Электр өткөргүч схемасы

The TSOS5-W switch has four wires for connection: Line (Hot), Load, Neutral, and Ground.

• Кара зым: Connects to the Line (Hot) wire from the electrical box.
• Кызыл зым: Connects to the Load wire (to the light fixture/fan).
• Ак зым: Connects to the Neutral wire from the electrical box.
• Жашыл зым: Connects to the Ground wire from the electrical box.

Сүрөт 1: Алдыңкы view of the TOPGREENER TSOS5-W motion sensor switch, showing the sensor lens and the OFF-AUTO-ON slider.

Figure 2: Internal components of the TSOS5-W, illustrating the PIR sensor, customizable controls, and safety features.

5.2 Этап-этабы менен орнотуу

1. Кубатты өчүрүү: Locate the circuit breaker that controls the power to the switch box and turn it OFF. Verify power is off using a voltage сыноочу.
2. Эски которгучту алып салуу: Carefully remove the existing wall plate and switch from the electrical box. Disconnect the wires from the old switch.
3. Зымдарды аныктоо: Identify the Line (Hot), Load, Neutral, and Ground wires in your electrical box. The neutral wire is typically white. If you are unsure, consult a qualified electrician.
4. Зымдарды туташтыруу: Using the provided wire nuts, connect the wires from the TSOS5-W switch to the corresponding wires in the electrical box:
   • Black switch wire to Line (Hot) wire.
   • Red switch wire to Load wire.
   • White switch wire to Neutral wire.
   • Green switch wire to Ground wire.
5. Которгучту орнотуу: Carefully fold the wires into the electrical box and secure the TSOS5-W switch to the box using the mounting screws.
6. Дубал плитасын орнотуу: Дубалга орнотулган пластинаны (өзүнчө сатылат) өчүргүчтүн үстүнө бекитиңиз.
7. Күчтү калыбына келтирүү: Электрди өчүргүчтөн кайра күйгүзүңүз.

6. Операция

The TSOS5-W features a slider switch for mode selection and adjustable dials for sensitivity and time delay, located behind the faceplate.

6.1 Режимди тандоо

Figure 3: The OFF-AUTO-ON slider switch for mode selection.

• AUTO Mode (Occupancy Sensor): In this mode, the switch automatically turns lights ON when motion is detected and OFF after a set time delay when no motion is detected. This is the primary energy-saving mode.
• КҮЙҮК режими: This mode overrides the sensor, keeping the lights ON continuously, similar to a standard light switch.
• ӨЧҮРҮҮ РЕЖИМИ: This mode overrides the sensor, keeping the lights OFF continuously, similar to a standard light switch.

6.2 Adjusting Settings (Behind Faceplate)

To access the adjustment dials, carefully remove the faceplate of the switch. You will find dials for Time Delay and Sensitivity.

• Убакыт кечигүү: This setting determines how long the lights remain ON after the last detected motion. Adjustable options include 15 seconds (test mode), 10 minutes, 20 minutes, and 30 minutes. Rotate the dial to select the desired delay.
• Сезимталдуулук: This setting controls the sensor's responsiveness to motion. It can be adjusted from 30% to 100%. A higher sensitivity setting will detect smaller movements or movements at a greater distance. Rotate the dial to adjust.

Figure 4: The TSOS5-W in an occupancy sensing application, providing hands-free lighting control.

7. Кыйынчылыктарды

8. Техникалык тейлөө

• Clean the sensor lens periodically with a soft, dry cloth to ensure optimal performance. Avoid using abrasive cleaners.
• Do not paint over the sensor lens.
• No user-serviceable parts inside. Do not attempt to disassemble the unit.

9. Кепилдик жана колдоо

TOPGREENER products are designed for reliability and performance. For warranty information or technical support, please contact TOPGREENER customer service. Refer to the product packaging or the official TOPGREENER webбайланыш маалыматы үчүн сайт.

Өндүрүүчү: Top Greener Inc