The 3M C3SD Vinyl Insulated Fork Terminal FV10-10Q is designed for reliable electrical connections in industrial and occupational settings. This terminal features a wider tongue, specifically engineered for use on free-standing studs. Its construction ensures good conductivity and corrosion resistance, making it suitable for demanding applications.
Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:
Yellow vinyl-insulated, butted-seam barrel for secure fit and reliable performance.
Funnel-designed polyvinyl chloride sleeve for easy wire insertion.
Wider-tongue design optimized for free-standing studs.
Accommodates wire sizes 12 to 10 AWG.
Electrolytic copper construction for excellent conductivity.
Tin-plated finish to resist corrosion.
Image: The 3M C3SD Vinyl Insulated Fork Terminal FV10-10Q, showing its red vinyl insulation and metal fork connector.
Техникалык мүнөздөмөлөр
Атрибут
Нарк
Продукциянын өлчөмдөрү
2 x 0.25 x 4 дюйм
Элемент Салмагы
0.35 унция
Модель номери
80611602709
Wire Gauge Accommodation
12 - 10 AWG
Туташтыргыч түрү
айры
Байланыш материалы
Electrolytic Copper
Изоляциялык материал
Polyvinyl Chloride (Vinyl)
Stud өлчөмү
#10
Температура диапазону
-40тан 221 градуска чейин (-40тан 105 градуска чейин)
Орнотуу жана орнотуу
Proper installation of the 3M C3SD Fork Terminal is crucial for safe and reliable electrical connections. This product is intended for industrial/occupational use only and should be installed by trained professionals in compliance with all applicable health and safety regulations.
Керектүү куралдар:
Wire Stripper (appropriate for 12-10 AWG)
Crimping Tool (designed for insulated terminals)
Коопсуздук көз айнек
Insulated Gloves (as required by safety protocols)
Орнотуу кадамдары:
Биринчи коопсуздук: Ensure all power to the circuit is disconnected and verified before beginning any work. Follow all lockout/tagпроцедуралардан чыгуу.
Зымды даярдаңыз: Carefully strip approximately 3/8 to 1/2 inch (9.5 to 12.7 mm) of insulation from the end of the wire (12-10 AWG). Ensure the stripped wire is clean and free of frayed strands.
Зымды киргизүү: Insert the stripped end of the wire fully into the barrel of the fork terminal. The funnel-designed sleeve aids in easy insertion. Ensure no bare wire is exposed outside the terminal barrel.
Терминалды кысыңыз: Using a suitable crimping tool for insulated terminals, crimp the barrel of the terminal firmly onto the wire. A proper crimp will secure the wire and ensure good electrical contact.
Кримпти текшериңиз: Visually inspect the crimp for tightness and integrity. Gently tug on the wire to ensure it is securely held within the terminal.
Stud менен туташыңыз: Place the fork end of the terminal onto the #10 free-standing stud. Secure it with the appropriate fastener (e.g., nut, screw) to ensure a tight mechanical and electrical connection. The wider tongue design facilitates this connection.
Байланышты текшерүү: After installation, verify the connection is secure and all safety measures are re-checked before re-energizing the circuit.
Image: An industrial worker wearing gloves, handling electrical wiring and connections, demonstrating the environment where such terminals are used.
Операция
The 3M C3SD Vinyl Insulated Fork Terminal is a passive component designed to provide a secure and conductive connection between a wire and a stud. Once properly installed and secured, the terminal facilitates the flow of electrical current. There are no operational controls or adjustments required for the terminal itself.
Ensure that the connected circuit operates within the specified electrical parameters (voltage, current) for the wire gauge and terminal rating to prevent overheating or damage.
Техникалык тейлөө
The 3M C3SD Fork Terminal requires minimal maintenance once installed correctly. However, periodic inspection of electrical connections is a good practice to ensure long-term reliability and safety.
Текшерүү боюнча көрсөтмөлөр:
Визуалдык текшерүү: Periodically inspect the terminal and its connection point for any signs of corrosion, discoloration (indicating overheating), or physical damage to the insulation or metal.
Тыюучулук: Ensure the fastener securing the terminal to the stud remains tight. Loose connections can lead to increased resistance, heat buildup, and potential failure.
Экологиялык факторлор: If the terminal is exposed to harsh environments (e.g., high humidity, chemicals), increase the frequency of inspections.
If any issues are observed, disconnect power to the circuit immediately and address the problem. Replace any damaged terminals with new ones of the appropriate type and rating.
Проблемаларды чечүү
Most issues related to electrical terminals stem from improper installation or environmental factors. Always ensure power is disconnected before attempting any troubleshooting or repairs.
Көйгөй
Мүмкүн себеп
Чечим
Poor Electrical Connection / Intermittent Power
Loose crimp on wire; Loose connection to stud; Corroded contact surfaces.
Re-crimp the terminal or replace it; Tighten the fastener on the stud; Clean or replace corroded terminals/studs.
Terminal Overheating / Discoloration
Loose connection; Undersized wire/terminal for current load; Improper crimp.
Tighten connection; Verify wire gauge and terminal rating match circuit requirements; Ensure proper crimp. Replace damaged terminal.
Use the correct crimping tool; Apply adequate crimp pressure; Ensure wire is fully inserted before crimping. Replace terminal.
If troubleshooting steps do not resolve the issue, consult a qualified electrician or contact 3M technical support.
Маанилүү коопсуздук маалыматы
For Industrial/Occupational Use Only: This product is intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. It is NOT intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature).
Users must select and use this product in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations. The user must take any action required under any recall, field action, or other product use notice.
3M өнөр жай жана кесиптик продукцияларын туура эмес колдонуу жаракат алууга, ооруга, өлүмгө же мүлккө зыян келтирүүгө алып келиши мүмкүн. Продукцияны тандоо жана колдонуу боюнча жардам алуу үчүн, жергиликтүү коопсуздук боюнча адиске, өнөр жай гигиенистине же башка адиске кайрылыңыз.
Always disconnect power before installing, inspecting, or maintaining electrical connections. Wear appropriate personal protective equipment (PPE) such as safety glasses and insulated gloves.
Кепилдик жана колдоо
For specific warranty information regarding the 3M C3SD Vinyl Insulated Fork Terminal FV10-10Q, please refer to the terms and conditions provided at the time of purchase or contact 3M directly.
For additional product information, technical assistance, or support, please visit the official 3M website or contact 3M customer service:
