Einhell TC-TS 2025/1 U Table Saw User Manual

1. Киришүү

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Einhell TC-TS 2025/1 U Table Saw. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

The Einhell TC-TS 2025/1 U is a powerful table saw designed for precise cutting of wood and similar materials. It features a 2000W motor and a 250mm saw blade, offering a maximum cutting height of 85mm.

2. Коопсуздук нускамалары

ЭСКЕРТҮҮ: Өрт, электр тогуна урунуу жана жеке жаракат алуу коркунучун азайтуу үчүн ар дайым негизги коопсуздук чараларын сактаңыз.

Ар дайым коопсуздук көз айнек, угууну коргоо жана чаң маскасы сыяктуу тиешелүү жеке коргонуу шаймандарын (ЖКК) тагыныңыз.
Иш аянты таза, жакшы жарык жана тоскоолдуктар жок болушун камсыз кылыңыз.
Балдарды жана жанындагы адамдарды операция аймагынан алыс кармаңыз.
d-де арааны иштетпеңизamp же нымдуу шарттар.
Always disconnect the power supply before making adjustments, changing accessories, or performing maintenance.
Use the push stick provided when cutting small workpieces.
Ensure the saw blade is sharp and correctly installed.
Never reach into the blade area while the saw is running.

3. Продукциянын компоненттери

Familiarize yourself with the main parts of your Einhell TC-TS 2025/1 U Table Saw.

Стол
Saw Blade
Blade Guard
Параллель токтотуу
Angle Stop
Height/Angle Adjustment Handwheel
Күйгүзүү/өчүрүү
Чаң чыгаруу порту
Push Stick
Тур

4. Орнотуу жана чогултуу

Follow these steps to assemble and set up your table saw for initial use.

4.1 Стендди чогултуу

Carefully unpack all components. Assemble the stand according to the diagrams provided in the separate assembly instructions. Ensure all bolts are securely tightened.

4.2 Аралоо дискин орнотуу

Ensure the saw is unplugged from the power supply.
Remove the blade guard if necessary.
Use the provided wrenches to loosen the blade nut.
Carefully place the new blade onto the arbor, ensuring the teeth are pointing in the correct direction (usually indicated by an arrow on the blade and saw).
Tighten the blade nut securely with the wrenches.
Reinstall the blade guard.

Saw blade installation with wrenches — Figure 4.2.1: Illustration of saw blade installation using the provided wrenches. This image shows the saw blade and the two wrenches used to secure or remove it from the arbor.

4.3 Чаң соргучту туташтыруу

Connect a suitable dust extraction system to the dust port on the saw to maintain a clean work environment and improve visibility.

Dust extraction port connection — Figure 4.3.1: Close-up of the dust extraction port on the saw's housing, showing a black corrugated hose connected to the port, ready for a dust collection system.

5. Иштөө нускамалары

5.1 Бышактын бийиктигин жана бурчун тууралоо

The blade height and angle can be adjusted using the handwheel located on the front of the saw.

To adjust blade height: Turn the handwheel to raise or lower the blade.
To adjust blade angle (bevel cut): Loosen the locking mechanism, tilt the blade to the desired angle (0-45 degrees), and then secure the locking mechanism.

Blade height and angle adjustment mechanism — Figure 5.1.1: Close-up of the handwheel and scale for adjusting the saw blade's height and angle from 0 to 45 degrees. An arrow indicates the rotational movement for adjustment.

Figure 5.1.2: Graphic illustrating the 2-in-1 function for height and angle adjustment, showing the handwheel and the range of 0-45 degrees.

5.2 Using the Parallel Stop and Angle Stop

The parallel stop is used for rip cuts, ensuring a consistent width. The angle stop is used for cross-cuts and miter cuts.

Параллель аялдама: Position the parallel stop to the desired cutting width and lock it in place using the eccentric clamp.
Angle Stop: Insert the angle stop into the T-slot on the table. Adjust it to the required angle and secure it.

Parallel and angle stop adjustment — Figure 5.2.1: Diagram showing the adjustable parallel stop (horizontal arrows) and angle stop (curved arrows) on the saw table for precise material guidance.

Параллелдүү токтотуу үчүн багыттоочу темир жол — Figure 5.2.2: Graphic illustrating the guide rail for the parallel stop, indicating its adjustable movement across the table.

5.3 Performing a Cut

Даярдоочу бөлүктүн туруктуу жана туура колдоого алынганын текшериңиз.
Adjust the blade height so that the blade teeth are approximately 3-5mm above the workpiece.
Turn on the saw using the green 'I' button. Allow the blade to reach full speed.
Slowly and steadily feed the workpiece into the blade, using the parallel stop or angle stop for guidance. Always use the push stick for narrow cuts.
Once the cut is complete, turn off the saw using the red 'O' button and wait for the blade to stop completely before removing the workpiece or offcuts.

Operator using the table saw with dust extraction — Figure 5.3.1: An operator demonstrating the use of the table saw, feeding a wooden workpiece while the dust extraction system is connected. The operator is wearing safety glasses.

6. Техникалык тейлөө жана тазалоо

Үзгүлтүксүз тейлөө үстөл арааңыздын узак жана коопсуз иштешин камсыздайт.

6.1 Жалпы тазалоо

Тазалоодон мурун дайыма розетканы ажыратыңыз.
Remove sawdust and debris from the saw table, blade guard, and motor housing after each use. Use a brush or vacuum cleaner.
Агрессивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.

6.2 Бычакка кам көрүү

Inspect the saw blade regularly for wear, damage, or dullness. Replace damaged or dull blades immediately.
Ылайыктуу бычакты тазалоочу менен бычактан чайырды жана чайырды тазалаңыз.

6.3 Сактоо

Store the saw in a dry, secure location, out of reach of children. The power cable can be neatly stored using the integrated cable holder.

Электр кабелин сактоочу жай — Figure 6.3.1: Close-up of the integrated cable holder on the saw's housing, showing the power cable neatly wrapped and secured.

7. Кыйынчылыктарды

Көйгөй	Мүмкүн себеп	Чечим
Сау башталбайт	No power supply; Faulty switch; Overload protection triggered.	Check power connection; Inspect switch; Allow motor to cool down and reset.
Бычак жумуш бөлүгүндө байлайт	Dull blade; Incorrect blade height; Workpiece not properly supported; Parallel stop not aligned.	Replace or sharpen blade; Adjust blade height; Ensure workpiece stability; Realign parallel stop.
Ашыкча термелүү	Loose blade; Damaged blade; Loose components.	Check blade tightness; Replace damaged blade; Tighten all fasteners.
Начар кесүү сапаты	Dull or incorrect blade; Incorrect blade height; Material type.	Use appropriate sharp blade for material; Adjust blade height; Consider material properties.

8. Техникалык шарттар

Модел: TC-TS 2025/1 U
Кубат киргизүү: 2000 W (Max. 1800 W continuous)
Тtage: 240 V
Араанын диаметри: 250 мм
Араанын мизинин диаметри: 30 мм
Max. Cutting Height at 90°: 85 мм
Max. Cutting Height at 45°: 65 мм
Столдун көлөмү: 640 x 487 мм
Table Extension (Left/Right): Ооба
Салмагы: 18.8 кг
Өндүрүүчү бөлүгүнүн номери: 4340540

9. Кепилдик жана колдоо

Einhell products are subject to strict quality controls. Should this product nevertheless not function perfectly, please contact the Einhell service department or the dealer where you purchased the device.

For warranty claims, please retain your purchase receipt. Einhell offers an extended warranty on certain products upon online registration within 30 days of purchase. Please visit the official Einhell website for detailed warranty terms and registration information.

Онлайн колдоо: For further assistance, FAQs, and spare parts, please visit the official Einhell webсайт: www.einhell.com

	Einhell TC-TC 800 Fliesenschneidmaschine Bedienungsanleitung Umfassende Bedienungsanleitung für die Einhell TC-TC 800 Fliesenschneidmaschine. Enthält Sicherheitshinweise, technische Daten, Montage-, Betriebs- и Wartungsanleitungen sowie Garantieinformationen.
	Einhell TC-TS 254 эко стол тегерек араа колдонмосу Einhell TC-TS 254 эко үстөл араасынын кеңири эксплуатациялык көрсөтмөлөрү жана коопсуздук боюнча көрсөтмөлөрү. Анын өзгөчөлүктөрү, техникалык мүнөздөмөлөрү жана туура колдонулушу жөнүндө билип алыңыз.
	Einhell TC-MC 355/1 Metall-Trennmaschine Bedienungsanleitung Umfassende Bedienungsanleitung für die Einhell TC-MC 355/1 Metall-Trennmaschine. Erfahren Sie mehr über sichere Bedienung, Montage, technische Daten и Wartung für effizientes Metallschneiden.
	Einhell TE-TC 620/1 U Bedienungsanleitung Umfassende Bedienungsanleitung für die Einhell TE-TC 620/1 U Fliesenschneidmaschine, inklusive Sicherheitshinweisen, technischen Daten жана Wartungstipps für präzise Fliesenarbeiten.
	Einhell TC-MG 250 CE Multifunktionswerkzeug - Originalbetriebsanleitung Umfassende Originalbetriebsanleitung für das Einhell TC-MG 250 CE Multifunktionswerkzeug. Enthält Sicherheitshinweise, technische Daten, Bedienungsanleitung, Wartung жана Entsorgung.
	Einhell TC-CD 18/35 Li Akku-Bohrschrauber Bedienungsanleitung Entdecken Sie den Einhell TC-CD 18/35 Li Akku-Bohrschrauber mit dieser umfassenden Bedienungsanleitung. Erfahren Sie mehr über sichere Handhabung, technische Spezifikationen и Wartung für Ihre Heimwerkerprojekte.