Fluke 374 FC 600A AC/DC TRMS Wireless Clamp Метрдин колдонуучусу

1. Киришүү

This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your Fluke 374 FC 600A AC/DC TRMS Wireless Clamp Meter. The Fluke 374 FC is designed for advanced troubleshooting performance, offering true-RMS measurements for accurate readings on non-linear signals. It features wireless connectivity via Fluke Connect, allowing for remote measurement viewing and data recording.

2. Коопсуздук маалыматы

Always adhere to safety precautions when using electrical test equipment. Failure to do so may result in injury or damage to the meter or equipment under test.

• Бардык нускамаларды окуңуз: Before operating the meter, thoroughly read and understand all safety and operating instructions.
• Рейтингдүү томtage жана учурдагы: Баалангандан ашык колдонбоңузtage or current, as marked on the meter, between the terminals or between any terminal and earth ground.
• Жеке коргонуу каражаттары (ЖКК): Always wear appropriate PPE, including arc-rated clothing, eye protection, and insulated gloves, when working in hazardous electrical environments.
• Колдонуудан мурун текшерүү: Before each use, inspect the meter, test leads, and accessories for any damage. Do not use if damaged.
• Сунуш 65 Эскертүү: Бул продукт сизди Калифорния штатында рак жана тубаса кемтиктер же башка репродуктивдик зыян келтирүүчү химиялык заттарга дуушар кылышы мүмкүн. Көбүрөөк маалымат алуу үчүн, төмөнкү дарекке кириңиз: www.P65Warnings.ca.gov.

3. Продукт бүтүп калдыview

The Fluke 374 FC is a robust clamp meter designed for professional electrical measurements. Its key features include:

• 600 A AC and DC current measurement.
• 2500 A AC current measurement with the optional iFlex flexible current probe.
• True-RMS voltage and current for accurate measurements on non-linear signals.
• Fluke Connect Measurements for wireless connectivity to smartphones.
• Ability to record results directly to your phone and the Cloud.

Сүрөт 1: Алдыңкы view of the Fluke 374 FC Clamp Meter, showing the display, rotary dial, clamp jaws, and function buttons.

2-сүрөт: Бурчтуу view of the Fluke 374 FC Clamp Meter, highlighting its ergonomic design and robust construction.

4. Орнотуу

4.1 Батареяны орнотуу

The Fluke 374 FC requires two (2) AA batteries for operation.

1. Эсептегич өчүрүлгөнүн текшериңиз.
2. Эсептегичтин арткы бетиндеги батарея бөлүмүнүн капкагын табыңыз.
3. Капкактын бекитүүчү бурамасын(ларын) бошотуу үчүн бурагычты колдонуңуз.
4. Remove the cover and insert two AA batteries, observing correct polarity (+/-).
5. Батарея уясынын капкагын ордуна коюңуз жана бурама(ларды) бекем бекемдеңиз.

4.2 Баштапкы күйгүзүү

Turn the rotary dial from the OFF position to any measurement function to power on the meter. The display will illuminate.

4.3 Fluke Connect App Setup

To utilize the wireless capabilities, download the Fluke Connect app on your smartphone or tablet. Follow the in-app instructions to pair your Fluke 374 FC meter.

Figure 3: The Fluke 374 FC Clamp Meter wirelessly connected to a smartphone displaying measurement data via the Fluke Connect app.

5. Иштөө нускамалары

5.1 AC/DC Ток өлчөө

1. Turn the rotary dial to the “A” (Amps) position for AC current or “” (DC Amps) for DC current.
2. cl ачыңызamp триггерди басуу менен жаактарды.
3. Encircle a single conductor with the clamp жаактар. Жаактардын толугу менен жабык экенин текшериңиз.
4. Read the current measurement on the display.
5. For DC current measurements, press the “ZERO” button before clamping to eliminate any DC offset.

5.2-томtage Өлчөө

1. Connect the test leads to the appropriate input jacks (COM and VΩ).
2. Turn the rotary dial to the “V” (Volts) position.
3. Өлчөнө турган схемага же компонентке сыноо зонддорун туташтырыңыз.
4. Томду окуңузtage measurement on the display.

5.3 Using the iFlex Flexible Current Probe (Optional)

The iFlex probe allows for current measurements in tight spaces or around large conductors, extending the AC current measurement range up to 2500 A.

1. Plug the iFlex probe into the meter’s dedicated iFlex input jack.
2. Turn the rotary dial to the iFlex position.
3. Wrap the flexible probe around the conductor(s) to be measured. Ensure the probe is securely latched.
4. Read the current measurement on the display.

5.4 Fluke Connect Operation

Once paired, the Fluke Connect app allows you to:

• View live measurements remotely on your smartphone, enhancing safety by allowing you to stand at a safe distance.
• Record measurements directly to your phone and upload them to the Fluke Cloud for analysis and reporting.
• Access historical data and trends.

6. Техникалык тейлөө

6.1 Тазалоо

Wipe the meter case with a damp кездеме жана жумшак жуугуч каражат. Абразивдүү заттарды же эриткичтерди колдонбоңуз. Колдонуудан мурун эсептегичтин кургак экенин текшериңиз.

6.2 Батареяны алмаштыруу

Дисплейде батарейка аз индикатору пайда болгондо батарейкаларды алмаштырыңыз. Батареяны орнотуу көрсөтмөлөрү үчүн 4.1-бөлүмдү караңыз.

7. Кыйынчылыктарды

If the meter does not function correctly, consider the following:

• Дисплей жок: Батареянын орнотулушун текшерип, батарейкалары түгөнүп калбагандыгын текшериңиз.
• Туура эмес окуулар: Ensure test leads are properly connected and the correct measurement function is selected. For DC current, ensure the ZERO function has been used.
• Fluke Connect issues: Verify Bluetooth is enabled on your smartphone and the meter, and that the app is up to date.

For persistent issues, contact Fluke customer support.

8. Техникалык шарттар

9. Кутуда эмне бар

Таңгактан чыгаргандан кийин, бардык буюмдар бар экенин текшериңиз:

• Fluke 374 FC Clamp Метр
• TL75 сыноо өткөргүчтөрү
• Батареялар (алдын ала орнотулган же өзүнчө)
• Ташуу кутусу

Figure 4: The Fluke 374 FC Clamp Meter, test leads, and carrying case as typically included in the product package.

10. Кепилдик жана колдоо

Fluke Corporation warrants this product to be free from defects in material and workmanship under normal use and service. The specific warranty period and terms are detailed in the warranty statement provided with your product or available on the official Fluke webсайт.

For technical support, service, or warranty claims, please contact Fluke customer service through their official website or authorized service centers. Always provide your product model number (374 FC) and serial number when seeking support.