Introduction
This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your Zoeller Shark Model 807-0001 Residential Grinder Pump. Please read this manual thoroughly before attempting to install or operate the pump. Retain this manual for future reference.
The Zoeller Shark Model 807-0001 is a 1 HP, 115V residential grinder pump designed for handling wastewater and effluent in residential applications. It features a robust grinding mechanism to reduce solids into a fine slurry, allowing for discharge through small diameter piping.
Коопсуздук маалыматы
WARNING: Risk of electric shock. This pump is supplied with a grounding conductor and grounding-type attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type receptacle.
- Always disconnect power to the pump before handling or servicing.
- Бардык электр туташуулары квалификациялуу электрик тарабынан жасалганын жана жергиликтүү эрежелерге ылайык келгенин текшериңиз.
- Do not operate the pump in an explosive atmosphere.
- Орнотуу жана тейлөө учурунда тиешелүү жеке коргонуу шаймандарын (ЖКК) кийиңиз.
- Бул продукт Калифорния штатына рак жана тубаса кемтиктерди же башка репродуктивдик зыян келтирерин белгилүү болгон химиялык заттарды камтыйт. (65-сунуш боюнча эскертүү)
Орнотуу жана орнотуу
Proper installation is crucial for the longevity and performance of your grinder pump. Consult a qualified professional for installation if you are unsure.
Пакеттен чыгаруу жана текшерүү
Carefully remove the pump from its packaging. Inspect for any visible damage that may have occurred during shipping. Report any damage to your supplier immediately.
Figure 1: Zoeller Shark Model 807-0001 Residential Grinder Pump. This image shows the complete pump unit with its float switch mechanism.
Location and Sump Requirements
- The pump must be installed in a properly sized and vented sump or basin.
- Ensure the sump is free of debris before placing the pump.
- The pump should be placed on a solid, level surface at the bottom of the sump.
Түтүк туташтыруулары
- Connect the discharge piping to the pump's outlet. Ensure all connections are watertight.
- Install a check valve in the discharge line to prevent backflow.
- A shut-off valve is recommended for ease of maintenance.
Электр байланыштары
- The pump requires a 115V, 60 Hz, single-phase power supply.
- Connect the pump to a dedicated, properly grounded circuit with appropriate overcurrent protection.
- Ensure the float switch is installed and adjusted correctly to control pump cycles.
Иштөө нускамалары
Once installed and connected, the Zoeller Shark Model 807-0001 operates automatically via its float switch.
Алгачкы ишке киргизүү
- Ensure all piping and electrical connections are secure.
- Slowly fill the sump with water to activate the float switch.
- Observe the pump for proper operation: it should turn on, pump down the water, and then turn off.
- Check for any leaks in the discharge piping.
Кадимки операция
The pump will activate when the water level rises to the "on" level set by the float switch and will continue to run until the water level drops to the "off" level. The grinding mechanism processes solids before pumping.
Сүрөт 2: Жакын пландан view of the Zoeller Shark Grinder Pump's impeller and grinding plate. This mechanism is responsible for reducing solids in wastewater.
Техникалык тейлөө
Regular maintenance helps ensure reliable operation and extends the life of your pump.
Күнүмдүк текшерүүлөр (ай сайын)
- Визуалдык текшерүү: Check the pump and sump for any unusual debris, blockages, or signs of wear.
- Float Switch: Manually lift and lower the float switch to ensure it moves freely and activates the pump correctly.
- Чыгуу линиясы: Listen for any unusual noises or signs of obstruction in the discharge line.
Annual Inspection (Professional Recommended)
- Inspect the grinding mechanism for wear.
- Check motor windings and electrical connections.
- Clean the sump basin кылдат.
CAUTION: Always disconnect power before performing any maintenance or inspection.
Проблемаларды чечүү
This section provides solutions to common issues. For problems not listed, contact customer support.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Насос иштебейт | No power; tripped breaker; faulty float switch; motor overload. | Check power supply and breaker. Inspect float switch for obstruction. Reset thermal overload if present. |
| Насос үзгүлтүксүз иштейт | Stuck float switch; check valve failure; discharge line blockage. | Clear float switch. Inspect/replace check valve. Clear discharge line. |
| Насос иштейт, бирок суу чыкпайт | Air lock; clogged impeller/grinder; discharge line blockage. | Vent air from pump. Clear impeller/grinder. Clear discharge line. |
| Ашыкча ызы-чуу же титирөө | Debris in pump; worn bearings; improper installation. | Disconnect power and inspect for debris. Contact service professional for worn parts. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | 807-0001 |
| Бренд | Zoeller |
| Ат күчү | 1 HP |
| Тtage | 115 вольт |
| Power Source | AC/DC |
| Максималдуу агым ылдамдыгы | Мүнөтүнө 45 галлон |
| Элемент Салмагы | 65 фунт |
| Продукциянын өлчөмдөрү | 17.25"L x 8.91"W x 17.25"H |
| Материал | Дат баспаган болот |
Кепилдик маалымат
Zoeller Company products are warranted against defects in material and workmanship for a period specified by the manufacturer from the date of purchase. Specific warranty terms and conditions may vary. Please refer to the official Zoeller Company warranty statement provided with your product or visit the manufacturer's webтолук маалымат алуу үчүн сайт.
Note: Improper installation, unauthorized repairs, or misuse of the product may void the warranty.
Кардарларды колдоо
For technical assistance, replacement parts, or warranty claims, please contact Zoeller Customer Support.
- Өндүрүүчү: Zoeller Company
- Webсайт: www.zoellerpumps.com
- Байланыш маалыматы: Расмий Zoeller сайтына кайрылыңыз webучурдагы байланыш маалыматтары үчүн сайт же продуктунун таңгагы.
