User Manual

1. Киришүү

This manual provides essential information for the safe and effective operation, setup, and maintenance of your Telwin TECHNOLOGY TIG 182 AC/DC-HF/LIFT 230V welding machine. Please read this manual thoroughly before using the equipment to ensure proper function and to prevent injury or damage.

The TECHNOLOGY TIG 182 is an inverter welding machine designed for TIG (Tungsten Inert Gas) and MMA (Manual Metal Arc) welding processes. It offers both AC (Alternating Current) for aluminum and DC (Direct Current) for steel, stainless steel, copper, and other metals, with High Frequency (HF) and LIFT arc striking options.

2. Коопсуздук нускамалары

Welding can be hazardous. Always follow safety precautions to prevent electric shock, fire, burns, and exposure to fumes and gases. This section outlines general safety guidelines. Refer to local regulations and standards for comprehensive safety information.

• Электр Шок: Ensure the welding machine is properly grounded. Do not touch live electrical parts. Wear dry welding gloves and protective clothing. Work in a dry area.
• Түтүн жана газдар: Provide adequate ventilation or use a fume extractor to remove welding fumes and gases from the breathing zone.
• Өрт жана жарылуу: Keep flammable materials away from the welding area. Have a fire extinguisher readily available. Do not weld on containers that have held flammable materials.
• Арк нурлары: Wear a welding helmet with appropriate shade filter to protect eyes and face from arc rays. Wear protective clothing to shield skin from UV/IR radiation.
• Күйүктөр: Hot metal and equipment can cause severe burns. Wear heat-resistant gloves and protective clothing. Allow welded materials to cool before handling.
• Ызы-чуу: Welding operations can produce noise. Use hearing protection if noise levels are excessive.
• Тейлөө: Disconnect power before performing any maintenance or service on the machine.

3. Продукттын компоненттери жана өзгөчөлүктөрү

The Telwin TECHNOLOGY TIG 182 AC/DC-HF/LIFT 230V welding machine is designed for versatility and performance. Below is an overview анын негизги компоненттеринин бири.

Figure 1: Front and bottom view of the Telwin TECHNOLOGY TIG 182 AC/DC-HF/LIFT 230V welding machine. The top section, in red and black, features the control panel with a digital display, various indicator lights, and adjustment knobs. Ventilation grilles are visible on the front. The bottom section, primarily black, shows connection points for welding cables and a gas hose. A sturdy black handle is integrated into the top for portability.

• Башкаруу панели: Features a digital display for current settings, mode selection buttons (AC/DC, HF/LIFT), and adjustment knobs for welding parameters.
• Кубат которгучу: Located on the machine, used to turn the unit on or off.
• Welding Cable Connectors: Standard DINSE connectors for attaching the welding torch and ground clamp.
• Газ киргизүү: Connection point for the inert gas supply (e.g., Argon) required for TIG welding.
• Муздатуу желдеткичтери: Designed to dissipate heat and ensure optimal performance and longevity of the internal components.
• Ташуу туткасы: Integrated for easy transport of the machine.

4. Орнотуу

Proper setup is crucial for safe and effective welding. Follow these steps carefully:

1. Кубат туташуу: Connect the machine's power cord to a suitable 230V AC power outlet. Ensure the outlet is properly grounded and can supply the required ampөчүрүү.
2. Ground Clamp Байланыш: Жерди бекитүү clamp cable to the appropriate terminal on the welding machine (usually marked with a ground symbol or '-'). Secure the ground clamp firmly to the workpiece or welding table, ensuring good electrical contact.
3. TIG Torch Connection: Connect the TIG torch cable to the designated connector on the machine. Ensure all connections are tight.
4. Gas Cylinder Connection (for TIG): Connect the gas hose from the machine's gas inlet to a regulator on an inert gas cylinder (e.g., Argon). Ensure all connections are leak-free. Open the gas cylinder valve slowly.
5. Tungsten Electrode Installation: Insert the appropriate tungsten electrode into the TIG torch collet and tighten the collet body. Ensure the electrode is properly sharpened for the desired welding process.
6. Иш аянтын даярдоо: Clear the welding area of any flammable materials. Ensure adequate ventilation.

5. Иштөө

Once the machine is set up, you can begin welding. Always wear appropriate Personal Protective Equipment (PPE) before starting.

1. Күйгүзүү: Turn on the main power switch of the welding machine. The digital display and indicator lights should illuminate.
2. Ширетүү режимин тандоо:
   • TIG AC: For welding aluminum and magnesium alloys. Use HF start for non-contact arc initiation.
   • TIG DC: For welding steel, stainless steel, copper, and other non-ferrous metals (except aluminum). Choose between HF or LIFT arc start.
   • ММА: For stick welding.
3. Adjust Welding Parameters: Use the control knobs to set the desired welding current (amperage) based on the material thickness and type of electrode/filler wire. Adjust gas pre-flow/post-flow and other TIG specific parameters as needed.
4. Arc баштоо:
   • HF Start: Position the torch close to the workpiece and press the torch trigger. The arc will initiate without contact.
   • LIFT Arc: Touch the tungsten electrode to the workpiece, then lift it slightly. The arc will initiate.
5. ширетүү: Maintain a consistent arc length and travel speed. Feed filler wire into the weld puddle as required for TIG welding.
6. Өчүрүү: After welding, release the torch trigger. Allow the gas post-flow to complete. Turn off the machine's power switch and close the gas cylinder valve.

6. Техникалык тейлөө

Regular maintenance ensures the longevity and optimal performance of your welding machine. Always disconnect the power supply before performing any maintenance.

• Тазалоо: Periodically clean the machine's exterior with a dry cloth. Use compressed air to blow out dust and debris from the cooling vents. Do not use solvents.
• Кабель жана туташтыргыч текшерүү: Regularly inspect welding cables, torch, and ground clamp эскирүү, бузулуу же бош туташуу белгилери үчүн. Бузулган компоненттерди дароо алмаштырыңыз.
• Tungsten Electrode Care: Ensure tungsten electrodes are clean and properly sharpened. Replace worn or contaminated electrodes.
• Gas Hose Inspection: Check the gas hose and connections for leaks or damage.
• Сактагыч: Store the machine in a clean, dry environment, protected from dust and moisture, when not in use.

7. Кыйынчылыктарды

Бул бөлүмдө сиз кездешиши мүмкүн болгон кеңири таралган көйгөйлөрдүн чечимдери берилген. Бул жерде көрсөтүлбөгөн көйгөйлөр боюнча квалификациялуу тейлөө кызматкерлерине кайрылыңыз.

8. Техникалык шарттар

Key technical specifications for the Telwin TECHNOLOGY TIG 182 AC/DC-HF/LIFT 230V welding machine:

9. Кепилдик жана колдоо

For warranty information, please refer to the documentation provided with your purchase or contact the retailer. For technical support, spare parts, or service, please contact Telwin customer service or an authorized service center. Keep your purchase receipt and the product's serial number handy when seeking support.

You can find more information and contact details on the official Telwin webсайт: www.telwin.com